ciefpsettings-enigma2 Abertis 30W Streamrelay

There are 426 replies in this Thread which was already clicked 79,846 times. The last Post () by Confederate.

    yes but everything must working together with freeserver ipk also. Yes I make installation on new image and this isn't solutions without any plugin. Must be somewhere error. I have my own channel list from openatv 6.4 and I don't have any problem before

    Hello ciefp.

    DM920UHD4K - OpenATV7.1 + Oscam-emu.

    Due to an error of mine, I had to reinstall OpenATV Image 7.1.

    I installed ABERTIS, then transferred the necessary files to Box. I downloaded your latest list. I installed the latest Softcam.key from Informed.

    After restarting the Box, the DTT Channels do not open.

    I reinstalled ABERTIS again, without success.

    Honestly, I don't know what's going on anymore. Have there been any changes in OpenATV 7.1?

    I need your help.

    Sorry to bother. Thank you and a hug.

    DM920-UHD4K + SF8008-UHD4K

    0. Install ciefp settings

    1. Install astra-sm from Openatv 7.1 feeds

    2. Upload astra.conf (from ciefp) to /etc/astra, and rigths to 755

    3. Upload abertis script to /etc/astra/scripts, and rights to 755

    4. Upload sysctl.conf to /etc/

    5. Reboot


    That's all.

    Abertis woks ok on openatv 7.1 and ciefp settings

    Hello jenseneverest and geisivi.


    It did not generate any "log". Is clean.


    I performed all these instructions more than once. Unsuccessfully.

    I have the files backed up and used them.

    But I went to collect others from the "ciefp". Unsuccessfully.

    Even the "channel list", I used the latest from "ciefp".

    And "softcam.key", I used the latest from "informed".

    I'll have to give up, because the installation is correct, as well as the files used.


    Will there be a WGET to install everything?


    Thank you both.

    Hugs.

    DM920-UHD4K + SF8008-UHD4K

    Someone had a similar problem, I don't remember exactly. It was written here in this topic. When I last checked that sofcamkey from informed, I know that there are generally no keys for abertis in it. Open the softcamkey from informed and you will see that there is nothing inside for abertis.


    I would recommend MOHAMED_OS or even the older softcamkey from enigma1960, they work 100% .

    Code
    https://github.com/MOHAMED19OS/SoftCam_Emu/blob/main/Universal/SoftCam.Key

    Hello,

    As I read on the OpenATV Forum, there is a "bug" in Image 7.1 still unresolved. It is advised to install Image 7.0 for now.

    Maybe that's why I can't get the ABERTIS Channels to work.

    I will wait. Thanks.

    DM920-UHD4K + SF8008-UHD4K

    thumbs up 1

    Hi tanks

    Image openatv7.1

    Vu plus solo2

    I update all the files 30/08

    Settings its update 22/10

    Abertis 30W: ok 100/100

    Express t2mi14w: work but not full.

    Astra4.8 12073 not work

    TP who didnt work for me: 11564 V plp0

    If Can you telme where is the prob.

    Do you have the latest astra.sm?

    No problem for me.

    Hello ciefp.


    DM920UHD 4K

    OpenATV 7.1


    It's weird, but it's a problem I can't solve on my own.


    I need help, to install ABERTIS Channels and work.


    These channels were already working, very well.

    I believe after an Image update they stopped working.


    I followed the Manual and installed everything again, for ARM.

    Oscam-emu 11715.

    OPEN keys, in softcam.key.

    Latest Ciefp Channels.

    There may be one dependency or several that are not installed.


    The streamlink plugin is installed:

    opkg install python3-youtube-dl

    opkg install python3-yt-dlp

    opkg install enigma2-plugin-extensions-streamlinkwrapper

    opkg install enigma2-plugin-extensions-ytdlpwrapper

    opkg install enigma2-plugin-extensions-ytdlwrapper

    opkg install streamlink

    opkg install streamlinksrv


    I ask, if possible here, or PM, that Ciefp send me the complete ASTRA file, installed in Enigma2.


    Is there a WGET command to install everything with Telnet?


    Thanks and hugs.

    DM920-UHD4K + SF8008-UHD4K

    Tanks For your response .

    Where i Can found the file of astra.sm

    And i have tested many solution but still dont work 4.8E and 11564 TP 14W t2mi

    I try to reinstall astra-sm.

    And everyting its update.

    -------When i chose the Channel from favorites: the streaming is on; but no video ( only black screen).-----

    (May be i must Add a code to lamedb) If that the solution? Can you tell me how Can i edit on this file.

    Everyone would like to have everything and all the channels work. But unfortunately, it is not so easy, you need to invest a little effort. A lot of people call me "let's set it up for me, I don't know that". I can tell you that each receiver is a story in itself. Everything comes into play, you need to find the right combination. Sometimes, even though it's the same receiver, it's the same oscam, but it's not the same line, and of course the results are different. You have to find the right combination for yourself.This was about skyde.

    I can only assume that you were trying to get skyde working, and in doing so you broke abertis.It depends on your settings.


    Abertis and sky de have different settings.

    Depending on which package you want to watch, you have to adjust certain settings.

    - SKY DE 19.2E

    menu/setup/usage & user interface/customize

    include ecm in HTTP streams - YES

    decrypt HTTP streams - NO

    decrypt HTTP streams downloads NO


    - Abertis 30W

    menu/setup/usage & user interface/customize

    include ecm in HTTP streams - NO

    decrypt HTTP streams - YES

    decrypt HTTP streams downloads NO


    This is how both packages work for me:

    menu/setup/usage & user interface/customize

    include ecm in HTTP streams - YES

    decrypt HTTP streams - YES

    decrypt HTTP streams downloads NO


    Streamlink as a plugin is not required for abertis


    Everything you need for abertis is in every settings I put here in this thread along with instructions.


    samirson75 Also the last astra.sm file is always in the last settings

    File
    ciefpsettings-enigma2 Abertis 30W Streamrelay
    Enigma2 settings and all the necessary abertis files
    ciefp

    Of course lame.db must be edited. That's why I always recommend to insert my settings without your editing because you can damage the lame.db file.

    Even though it's a streamrelay, you always have to have a signal to open the channel.


    ciefp added a new version:

    File
    ciefpsettings-enigma2 Abertis 30W Streamrelay 11.11.2022
    :: ciefpsettings E2 ::
    :: Abertis - RTRS ::
    ..:: 11.11.2022 ::..

    #ciefpsettingse2

    Update astra.conf
    Update settings

    ##### Hispasat 30W-5 / Hispasat 30W-6 (30°W) #####
    # Abertis #
    11502 V 10200
    TV
    - A7
    - A8
    - TPA
    - tpd
    Radio
    - R.Langreo
    - RPA



    ciefp

    I tried the new abertis channels but not open , may be it needs a biss key .

Enigma2 Channel List and Settings Support Forum

Enigma2 channel list - settings and satellites.xml. Support and downloads for custom uk and foreign satellite channel lists or satellites.xml files.

Participate now!

Don’t have an account yet? Register yourself now and be a part of our community!

Register Yourself Login