Display Morehi do you know why bosnian channels does not work with ax hd 61?
all the others t2-mi channels works properly, abertis too
thank you
best regards
Everything works for me. Check the signal on that sid channel in the bouquet.
There are 426 replies in this Thread which was already clicked 80,563 times. The last Post () by Confederate.
Display Morehi do you know why bosnian channels does not work with ax hd 61?
all the others t2-mi channels works properly, abertis too
thank you
best regards
Everything works for me. Check the signal on that sid channel in the bouquet.
signal is more than 10db and I can watch these channels with octagon sx88
maybe i miss something else?
I ve just upload "ciefp-E2-75E-34W-29.01.2023" folder
and nothing more
do I need to replace the other files also if installed?
Display MoreDisplay Morehi do you know why bosnian channels does not work with ax hd 61?
all the others t2-mi channels works properly, abertis too
thank you
best regards
Everything works for me. Check the signal on that sid channel in the bouquet.
Hi, all the abertis channels work fine but I only have problems with 2 of the radio channels, these are radio canarias, radio la autonomica and radio ECCA these 2 (2307) on the frequency 11347 H.
I also use the softcam.key of MOHAMED19OS, does this happen to anyone else?
Display Moresignal is more than 10db and I can watch these channels with octagon sx88
maybe i miss something else?
I ve just upload "ciefp-E2-75E-34W-29.01.2023" folder
and nothing more
do I need to replace the other files also if installed?
Did you replace astra.conf from that folder?
Display MoreDisplay Moresignal is more than 10db and I can watch these channels with octagon sx88
maybe i miss something else?
I ve just upload "ciefp-E2-75E-34W-29.01.2023" folder
and nothing more
do I need to replace the other files also if installed?
Did you replace astra.conf from that folder?
yes
Display MoreDisplay MoreDisplay Moresignal is more than 10db and I can watch these channels with octagon sx88
maybe i miss something else?
I ve just upload "ciefp-E2-75E-34W-29.01.2023" folder
and nothing more
do I need to replace the other files also if installed?
Did you replace astra.conf from that folder?
yes
The procedure is like this when I publish the new settings here:
- replace astr.conf in etc/astra,
- insert a new settings
- restart
Restart must be done in order for the new astra.conf to be loaded when starting the system.
ciefp added a new version:
QuoteDisplay More:: ciefpsettings E2 ::
:: Abertis - RTRS ::
..:: 02.02.2023 ::..
#ciefpsettingse2
Update astra.conf
Update settings
##### Eutelsat 5 West B (5°W) #####
New Freq. 12669
# Mediaset T2Mi #
- Focus HD
- 20Mediaset HD
- Test HEVC Main10
is it work oe.25 ??
yes.
ciefp added a new version:
QuoteDisplay More:: ciefpsettings E2 ::
:: Abertis - RTRS ::
..:: 21.02.2023 ::..
#ciefpsettingse2
Update astra.conf
( update is only required for test channels )
Update settings
##### Eutelsat 33E (33°E) #####
# Dasto Semtel #
- ProTV
##### Astra 4A / SES 5 (4.8°E) #####
New frequency T2MI
Some test channels, no picture, only test sound
12245 V 30000 2/3 MX-801
- DSNS Informed 1
- DSNS Informed 2
- DSNS Informed 3
- DSNS Informed 4
- DSNS Informed 5
- DSNS Informed 6
- DSNS Informed 7
- DSNS Informed 8
- DSNS Informed 9
- DSNS Informed 10
- DSNS Informed 11
- DSNS Informed 12
### icam streamrelay ###
- SkyUK
- SkyDE
- SKYIT
Hi ciefp.
Sorry for the inconvenience, again with the same problem:
I can't play the WebCams in your list.
Everything was working fine. But I had to reinstall the Image.
I have DM9204KUHD + OpenATV 7.2 installed.
You told me earlier, to run these programs in telnet:
Code:
opkg install python3-youtube-dl
opkg install python3-yt-dlp
opkg install enigma2-plugin-extensions-streamlinkwrapper
opkg install enigma2-plugin-extensions-ytdlpwrapper
opkg install enigma2-plugin-extensions-ytdlwrapper
opkg install streamlink
opkg install streamlinksrv
But without success. WebCams do not open.
Please I await your tips.
Thank you very much. Hugs.
Display MoreHi ciefp.
Sorry for the inconvenience, again with the same problem:
I can't play the WebCams in your list.
Everything was working fine. But I had to reinstall the Image.
I have DM9204KUHD + OpenATV 7.2 installed.
You told me earlier, to run these programs in telnet:
Code:
opkg install python3-youtube-dl
opkg install python3-yt-dlp
opkg install enigma2-plugin-extensions-streamlinkwrapper
opkg install enigma2-plugin-extensions-ytdlpwrapper
opkg install enigma2-plugin-extensions-ytdlwrapper
opkg install streamlink
opkg install streamlinksrv
But without success. WebCams do not open.
Please I await your tips.
Thank you very much. Hugs.
I certainly didn't tell you to install all those plugins. Only one plugin is needed for those streamlink webcams:
opkg install streamlinksrv
Hello ciefp.
I come to bother you again with this problem.
I have the DM920 with OpenATV 7.2 installed.
Yesterday the ABERTIS Channels stopped working, after an automatic update of OpenATV.
I couldn't get them working.
Today, the WebCam stopped opening.
So, I decided to reinstall OpenATV Image 7.2, the latest one.
After reinstalling the Image, I ran this Command in Telnet: opkg install streamlinksrv
After sending your last Channel List, I went to check the WebCam's.
Yeah... they don't open.
I didn't even try to install ABERTIS Channels.
I come to ask for your help. It might even be a "bug" of the Image.
Thanks for your tips.
Friendly hug.
Don’t have an account yet? Register yourself now and be a part of our community!