does this work with dream 920 oe2,5?~
Yes , for shure
ciefpsettings-enigma2 Abertis 30W Streamrelay
-
- Ciefp E2 Settings
- ciefp
- Thread is marked as Resolved.
There are 565 replies in this Thread which was already clicked 154,710 times. The last Post () by iordanis70.
-
-
Hello,
I had the ABERTIS Channels working well.
After installing VPNManager (German server) it stopped working.
Does the reason have to do with VPN?
How to make it work?
Thanks.
-
Hello, I have everything working ok, why do channels sometimes take a long time to open?
in some channels happens , why ? i don´t know. but normal happens the first time you open the channel the second one is faster .
my box SF8008 with OpenATV 7.5
Yes, then it opens a group of channels, but if you go to watch another group, it takes longer to open again, does anyone have a solution for this?
-
does this work with dream 920 oe2,5?~
Yes , for shure
So how do we do it?
-
Morning.
Where I can find the ipk of astra-sm form my SF8008 with OpenATV?
Thanks.
-
Morning.
Where I can find the ipk of astra-sm form my SF8008 with OpenATV?
Thanks.
There is no .ipk for astra-sm.
download the files from here:
-
Morning.
Where I can find the ipk of astra-sm form my SF8008 with OpenATV?
Thanks.
That receiver does not need astra-sm because it supports t2mi directly in hardware.
-
Morning.
Where I can find the ipk of astra-sm form my SF8008 with OpenATV?
Thanks.
That receiver does not need astra-sm because it supports t2mi directly in hardware.
yes,
but only with Define OS, with E2 firmware didnt get channels on 30W or other like megogo @ 5E
-
Display More
Morning.
Where I can find the ipk of astra-sm form my SF8008 with OpenATV?
Thanks.
That receiver does not need astra-sm because it supports t2mi directly in hardware.
yes,
but only with Define OS, with E2 firmware didnt get channels on 30W or other like megogo @ 5E
Listen to me, from telnet with the IP and user of your SF8008 enter and give the commands I wrote for you to install astra-sm. Restart the decoder and replace the files in the astra directory still in the decoder which you find in the first post of this thread.
-
Display MoreDisplay More
Morning.
Where I can find the ipk of astra-sm form my SF8008 with OpenATV?
Thanks.
That receiver does not need astra-sm because it supports t2mi directly in hardware.
yes,
but only with Define OS, with E2 firmware didnt get channels on 30W or other like megogo @ 5E
Listen to me, from telnet with the IP and user of your SF8008 enter and give the commands I wrote for you to install astra-sm. Restart the decoder and replace the files in the astra directory still in the decoder which you find in the first post of this thread.
I work on a linux Pc. I installed putty and repleced all files. thanks.
I dont know the path for softcamkey
-
Display MoreDisplay MoreDisplay More
Morning.
Where I can find the ipk of astra-sm form my SF8008 with OpenATV?
Thanks.
That receiver does not need astra-sm because it supports t2mi directly in hardware.
yes,
but only with Define OS, with E2 firmware didnt get channels on 30W or other like megogo @ 5E
Listen to me, from telnet with the IP and user of your SF8008 enter and give the commands I wrote for you to install astra-sm. Restart the decoder and replace the files in the astra directory still in the decoder which you find in the first post of this thread.
I work on a linux Pc. I installed putty and repleced all files. thanks.
I dont know the path for softcamkey
Put the softcamkey in user/key and where you have the oscam config files
-
Display MoreDisplay MoreDisplay MoreDisplay More
Morning.
Where I can find the ipk of astra-sm form my SF8008 with OpenATV?
Thanks.
That receiver does not need astra-sm because it supports t2mi directly in hardware.
yes,
but only with Define OS, with E2 firmware didnt get channels on 30W or other like megogo @ 5E
Listen to me, from telnet with the IP and user of your SF8008 enter and give the commands I wrote for you to install astra-sm. Restart the decoder and replace the files in the astra directory still in the decoder which you find in the first post of this thread.
I work on a linux Pc. I installed putty and repleced all files. thanks.
I dont know the path for softcamkey
Put the softcamkey in user/key and where you have the oscam config files
got it!
thanks
-
looking for a softcam file with megogo @5E
-
-
I'll never understand bi_ss key!
I thought was oneoneoneoneoneoneonetreetree, but is used for a lot of channels, and is not referred to megogo.
In the afternoon I scan that sat.
staytuned ;)
-
I'll never understand bi_ss key!
I thought was oneoneoneoneoneoneonetreetree, but is used for a lot of channels, and is not referred to megogo.
In the afternoon I scan that sat.
staytuned ;)
The softcamkey works for both Abertis and Megogo and more
-
Done.
Now I have to scan, I dont like setting from other people.
-
Fatto.
Adesso devo effettuare la scansione, non mi piacciono le impostazioni di altre persone. :faccina sorridente con alone:
No you have to load the Ciefp setting and then in case with dreamboxedit you copy the list of • 4.8 E - Ukraine FTA • BRT T2Mi which has Megogo inside (Мегого Спорт ТЕСТ) on your setting
-
Dont cross the forums
Sure I load an old setting.
-
All work fine.
Thanks everybody
Your resource for essential Enigma2 configuration files
Find downloads and support for channel lists, receiver settings, and updated satellites.xml data. Find channel lists, settings, and satellites.xml files for Enigma2. Access downloads and support to manage your bouquets and satellite data.
Participate now!
Don’t have an account yet? Register yourself now and be a part of our community!
