DVB-T2 FIXED!!!!!1
I think is better remove the video.
Confirm the DTV-fix works!
Mecool K7 | Support
- Deb12
- Thread is marked as Resolved.
-
-
Add this apk on K7 and will be fixed ;)
https://mega.nz/file/iJ0XEJoQ#…Yr8kLhImkgkT6pVdvu0CRs960Well all ok, ms8 also is ok
-
Add this apk on K7 and will be fixed ;)
https://mega.nz/file/iJ0XEJoQ#…Yr8kLhImkgkT6pVdvu0CRs960Well all ok, ms8 also is ok
Hi kronos46,
please, wich metod do you use to install this APK ?
I install this APK and my DTV app go in error state an loop in error
Please, let me knowThank you !
-
put in usb pen and install
-
Nuovo aggiornamento K7-ota-V2.20200811.121244 via USB
https://mega.nz/folder/OZkCUCiC#FYl4k7z-1FNMsYwFt9gDMw -
put in usb pen and install
Thank you bimbo80,
this way don't work ...
1) put the APK file in USB KEY.2) from file manager, install the APK file.
3) the installation process ask if you want install only NEW FILES or ALL FILE (default is NEW) (test NEW and ALL)
4) install the application
5) the install process finish succesfull, but a error message popo-up : ERROR - The App DTV, was closed in error. Restar application.
If you chose RESTART, the error goes in loop
ERROR - The App DTV, was closed in error. Restar application
RESTART
ERROR - The App DTV, was closed in error. Restar application
RESTART
ERROR - The App DTV, was closed in error. Restar application
Restart the Android-Box .... same problem .
How do you have succesfull install this APK file in your MECOOL K7 Box?
Thank you again for your support -
i must delete last dtv app before install the new
-
Thank you bimbo80.
Please, could you tell me with which tool you used to delete the DTV application?
The DTV application is a system application, and cannot be uninstalled.
Thanks in advance for your support
-
-
Thank you Zenpool,
but I have a MECOOL KIII PRO, and for now , no new Firmware released .
Last ( wrong ) Firmware is 20191204.I need to remove the system app DTV, then install the new DTV APK file.
Thank you for your support. -
The Dtv app from K7 will not work on KIII Pro.
You can try the Dtv app from "KIII_PRO_AVL6862-ota-20190301.101936.V0213" but i dont know if this help you.
-
@ Zenpool
Thank you Zenpool for your support.
I tried to install th.DTV APP, but the error is still the same.
First of all I uninstalled the th.dtv system app with System App Uninstaller tool.
Then, I installed the APK th.dtv (ver. 20190301), but the error DTV has stopped working appears.
So I did the factory reset. Then I installed th.DTV (ver. 20190301), but the error DTV stopped working pops up again.
How do I uninstall the th.DTV system app?
Thank you again
-
The best will be, flash your KIII Pro complete new with the Full-image, with Amlogic Burn Card Maker for SD-card.
The KIII_PRO_AVL6862-NHG47L-20181221.165922.V0213.img (1,1GB) is the latest Full-image i have found.
My own K3Pro has the Fw "KIII PRO-userdebug 7.1.2 NHG47L 20180321.121032.V0213" since i have the box bought.
I had never problems with DVB-C or DVB-S or Heat-reboots, and so i have never updatet (Never change a running system).
-
Thank you Zenpool for your support.
At this moment I have installed the firmware KIII_PRO_AVL6862-NHG47L-20190301, and the encrypted channels of DVB-S and DVB-T are correctly decrypted.
The problem is that the tuner is a bit "deaf".
The transponder scan intercepts fewer channels than a satellite decoder (eg: dreambox 800). I don't know why. Maybe it's a hardware problem with the TUNER or a software problem with the DTV application.
Thank you again -
You can use Coreelec with Tvheadend on a SD-Card or USB-Stick to check if Tuner works without Problems.
If this works fine then is your Problem the Mecool-Firmware.
-
Hi Zenpool
I have already tested Coreelec with Tvheadend on a SD-Card on the Mecool KIII PRO, and it works very well.All satellite and terrestrial channels are found, and scrambled channels are decrypted well.
I'm thinking the problem is the Mecool firmware. Hope a new firmware is released that fixes these issues.
Thank you for your support.
-
Add this apk on K7 and will be fixed ;)
How is it installed?
I update my k7 to version V2.20200811.121244 and then install the application, the sound is not heard on terrestrial channels.
:frown:
-
Mám ten stejný problém se zvukem AC3
-
Add this apk on K7 and will be fixed ;)
How is it installed?
I update my k7 to version V2.20200811.121244 and then install the application, the sound is not heard on terrestrial channels.
:frown:
Go to Menu> DTV preference > General settings > DVB T/T2
Antenna Power < on >
Area Setting < Select your country >
LCN < on >
Charactor encoding < ISO-8859-1>
First audio language < Select your country>
Second audio language < English>
Subtitle language < Select your country >
Auto start < on >
Try like this and let me know if you solve
channel search -
Mám ten stejný problém se zvukem AC3
Try to research channels
Participate now!
Don’t have an account yet? Register yourself now and be a part of our community!