H9S can't boot, can't be flashed...
- gorski
- Closed
- Thread is marked as Resolved.
There are 60 replies in this Thread which was already clicked 15,724 times. The last Post () by jenseneverest.
-
-
So, that's NOT a null modem cable (= crossed 2 and 3) but a straight one (= 2 to 2 and 3 to 3)?
-
-
M8, you can buy a cheap USB TTL cable on the net... See post no. 1!
-
try config Hi3798MV200-emmc maxytec multi
HiTool-STB-5.0.31
hi, pls . I can see some screenshots of the connection via devoder pc
-
--- gorski..
Have you tried files ... "Mahdi-DZ" ....
-
Not yet, no time... Probably tomorrow.... I have a monkey I need to get off my back first....
-
hello everyone sorry but iso translator, your wiring diagram does not work well ???
-
-
try config Hi3798MV200-emmc maxytec multi
HiTool-STB-5.0.31
hi, pls . I can see some screenshots of the connection via devoder pc
windows 7 professional,my box maxytec multibox
-
How big is the flash/eMMC in your Maxytec?
If I am right, then this is OEM of H9 Combo/Twin (8GB) with an Android partition, too...
So, not to be used (this XML file you posted here) for H9X/H92X series (only 256MB flash/eMMC)!
-
try config Hi3798MV200-emmc maxytec multi
HiTool-STB-5.0.31
hi, pls . I can see some screenshots of the connection via devoder pc
windows 7 professional,my box maxytec multibox
:thumbup::thumbup: great job. thx for support
-
How big is the flash/eMMC in your Maxytec?
If I am right, then this is OEM of H9 Combo/Twin (8GB) with an Android partition, too...
So, not to be used (this XML file you posted here) for H9X/H92X series (only 256MB flash/eMMC)!
maxytec multibox = 8gb Emmc
-
Yes, one must write down these details, so people don't follow blindly...
So, this is maybe OK for Zgemma H9 Combo/Twin...?
Not for H9x/H9.2x!
-
-
Yes, one must write down these details, so people don't follow blindly...
So, this is maybe OK for Zgemma H9 Combo/Twin...?
Not for H9x/H9.2x!
gorski...
What is a device similar to Zgemma H9X/H9.2X.......
What is the reason why your device stops working .....
-
HiSilicone cheap devices - but I am not aware of one exactly like that, with only 256MB...
So, we need an appropriate XML for 256MB eMMC...
-
HiSilicone cheap devices - but I am not aware of one exactly like that, with only 256MB...
So, we need an appropriate XML for 256MB eMMC...
I don't have any of those boxes, but this doesn't seem particularly difficult to do.
You probably need to modify the flash type to nand (maybe, not really sure) or similar - I also haven't ran or used HiTool.
The layout of the partitions can probably be derived from the bootargs in an image, e.g., from file
openatv-6.4-zgemmah9s-20201021_usb.zip, we extract and can see the following in bootargs.bin:
mtdparts=hinand:1M(boot),1M(bootargs),1M(baseparam),1M(pqparam),1M(logo),1M(deviceinfo),16M(kernel),234M(rootfs),-(others)
I'd imagine that, due to the way the image is structured, if you create a very simple xml file and restore bootloader on the first 2Mb of the flash with the fastboot.bin file (partition name = "boot", start="0", size="1M") and the bootargs.bin file (partition name="bootargs", start="1M", size="1M"), you'll probably be able to then flash a regular image via USB (again, this assumes restoring the bootloader via HiTool and serial port is successful).
-
And for that we need a proper xml file....
Please, feel free... I wouldn't know how to do that...
-
Try creating a file which would be something like the attached - make sure you pick the right files for the box for both the fastboot and bootargs, and create the right path under the hitool directory.
Zgemma H9 Support Forum - Combo Tuner DVB-S2X DVB-C/T2 Linux Enigma2 Multi-stream QT Stalker WiFi Digital Receiver
Participate now!
Don’t have an account yet? Register yourself now and be a part of our community!