From this page (Arabic forum) the some guys from India and Indonesia have same your issue and solved ...
http://www.altayebsat.com/vb/showthread.php?t=15657&page=13
Try to translation and read it
Dear fairbird if you have account on this website please download circled files for me
see screenshot
Display MoreDisplay MoreDisplay MoreDid you test ncam-sh4-stapi V11.2 ?!
Does it work on your device ?! and what device you have ?!
I need you feedback ...
Because some friend he have (Forever 7420) and he said the device cannot detected ?!!
hi sir. its ok for me thanks
xcruiser 400plus
Dear Mehar is voice and video both ok on this ncam or just video because i tried lot of plugins but all working good but only single problem still i am facing is intelsat 20 (68.5E) powervu channels on some plugin voice and video both are not working and some time video working fine but no audio please share you experience thanks in advance ( i am using ICONE Iron Pro)
I also tested sis channels and entered new codes and it has an audio but no video.
I think my receiver (xcruiser 400plus) does not support powervu.
Display MoreDisplay MoreDisplay MoreDisplay MoreDid you test ncam-sh4-stapi V11.2 ?!
Does it work on your device ?! and what device you have ?!
I need you feedback ...
Because some friend he have (Forever 7420) and he said the device cannot detected ?!!
hi sir. its ok for me thanks
xcruiser 400plus
Dear Mehar is voice and video both ok on this ncam or just video because i tried lot of plugins but all working good but only single problem still i am facing is intelsat 20 (68.5E) powervu channels on some plugin voice and video both are not working and some time video working fine but no audio please share you experience thanks in advance ( i am using ICONE Iron Pro)
I also tested sis channels and entered new codes and it has an audio but no video.
I think my receiver (xcruiser 400plus) does not support powervu.
if you have audio then video no problem just cahnge configuration to AFN Reader i share configuration here
Oscam.server
[reader]
label = emulator
protocol = emu
device = emulator
caid = 090F,0500,1801,0604,2600,FFFF,0E00,4AE1,1010
detect = cd
ident = 0D00:0000C0;0D02:0000A0;0500:023800,021110,007400;0E00:000000;1801:000000;1010:000000
group = 1
emmcache = 2,2,2,0
[reader]
label = SoftCam.Key
protocol = constcw
device = /storage/.kodi/userdata/addon_data/service.softcam.oscam/config/SoftCam.Key (change with your system location)
caid = 0D00,0D02,090F,0500,1801,0604,2600,FFFF,0E00,4AE1,1010
ident = 1801:000000,001101;0604:000000;2600:000000;FFFF:000000;0E00:000000;4AE1:000000;1010:000000
group = 1
[reader]
label = AFN
protocol = emu
device = emulator
caid = 0E00
detect = cd
group = 1
emmcache = 2,2,2,0
emu_auproviders = 0E00:000000
auprovid = 000E00
cacheex = 1
cacheex_maxhop = 1
cacheex_allow_request = 1
services = afn
This AFN Group with Cacheex=1
This is Oscam.services File
[afn]
caid = 0E00
provid = 000000
srvid = 0002,0003,0004,0006,0007,0008,0009,012C,0098,0097,0096,0032,04B1,03E9,04B2,00AD,00B7,00B9,00AF,0194,019E,0193,019D,0192,0191,004A,0048,004B,004C,0049,0047,00A0,009D,0037,0052
Follow the instruction and and add to related files
after that restart your box and come back to webif page and go to live log and and copy channel sid then go to services tab and edit afn and past copied sid there and save and restar your video and audio both ok
hi
Does AFN package work with this ncam version????!!!
No, AFN not working, DOWN with all emultors
From this page (Arabic forum) the some guys from India and Indonesia have same your issue and solved ...
http://www.altayebsat.com/vb/showthread.php?t=15657&page=13
Try to translation and read it
Hello
My problem was not completely solved and one of my servers was detected as cccam_mcs_HB while in oscam (cccam_mcs_HB) it is detected.
And when in the Edit Reader MyCcCam section, for example, I check or pick up Want Emu or Fallback, it connects to the server, and then now I turn the receiver on and off, it does not connect anymore.
I made all the settings inside ncam like oscam, but it did not make any difference.
But my problem is in the
CONFIGURATION --- cccam. Any changes I make in this section will not be saved.
And by restarting the receiver, it returns to the original settings
Like the image below
Display MoreDisplay MoreDisplay MoreDisplay MoreDisplay MoreDid you test ncam-sh4-stapi V11.2 ?!
Does it work on your device ?! and what device you have ?!
I need you feedback ...
Because some friend he have (Forever 7420) and he said the device cannot detected ?!!
hi sir. its ok for me thanks
xcruiser 400plus
Dear Mehar is voice and video both ok on this ncam or just video because i tried lot of plugins but all working good but only single problem still i am facing is intelsat 20 (68.5E) powervu channels on some plugin voice and video both are not working and some time video working fine but no audio please share you experience thanks in advance ( i am using ICONE Iron Pro)
I also tested sis channels and entered new codes and it has an audio but no video.
I think my receiver (xcruiser 400plus) does not support powervu.
if you have audio then video no problem just cahnge configuration to AFN Reader i share configuration here
Oscam.server
[reader]
label = emulator
protocol = emu
device = emulator
caid = 090F,0500,1801,0604,2600,FFFF,0E00,4AE1,1010
detect = cd
ident = 0D00:0000C0;0D02:0000A0;0500:023800,021110,007400;0E00:000000;1801:000000;1010:000000
group = 1
emmcache = 2,2,2,0
[reader]
label = SoftCam.Key
protocol = constcw
device = /storage/.kodi/userdata/addon_data/service.softcam.oscam/config/SoftCam.Key (change with your system location)
caid = 0D00,0D02,090F,0500,1801,0604,2600,FFFF,0E00,4AE1,1010
ident = 1801:000000,001101;0604:000000;2600:000000;FFFF:000000;0E00:000000;4AE1:000000;1010:000000
group = 1
[reader]
label = AFN
protocol = emu
device = emulator
caid = 0E00
detect = cd
group = 1
emmcache = 2,2,2,0
emu_auproviders = 0E00:000000
auprovid = 000E00
cacheex = 1
cacheex_maxhop = 1
cacheex_allow_request = 1
services = afn
This AFN Group with Cacheex=1
This is Oscam.services File
[afn]
caid = 0E00
provid = 000000
srvid = 0002,0003,0004,0006,0007,0008,0009,012C,0098,0097,0096,0032,04B1,03E9,04B2,00AD,00B7,00B9,00AF,0194,019E,0193,019D,0192,0191,004A,0048,004B,004C,0049,0047,00A0,009D,0037,0052
Follow the instruction and and add to related files
after that restart your box and come back to webif page and go to live log and and copy channel sid then go to services tab and edit afn and past copied sid there and save and restar your video and audio both ok
I tried this method of yours but it did not come up again
It seems that the receiver does not support
Display MoreFrom this page (Arabic forum) the some guys from India and Indonesia have same your issue and solved ...
http://www.altayebsat.com/vb/showthread.php?t=15657&page=13
Try to translation and read it
Hello
My problem was not completely solved and one of my servers was detected as cccam_mcs_HB while in oscam (cccam_mcs_HB) it is detected.
And when in the Edit Reader MyCcCam section, for example, I check or pick up Want Emu or Fallback, it connects to the server, and then now I turn the receiver on and off, it does not connect anymore.
I made all the settings inside ncam like oscam, but it did not make any difference.
But my problem is in the
CONFIGURATION --- cccam. Any changes I make in this section will not be saved.
And by restarting the receiver, it returns to the original settings
Like the image below
With me about (cccam_mcs_HB) no problem work just fine without change any things as config files in first post ...
Display MoreDisplay MoreFrom this page (Arabic forum) the some guys from India and Indonesia have same your issue and solved ...
http://www.altayebsat.com/vb/showthread.php?t=15657&page=13
Try to translation and read it
Hello
My problem was not completely solved and one of my servers was detected as cccam_mcs_HB while in oscam (cccam_mcs_HB) it is detected.
And when in the Edit Reader MyCcCam section, for example, I check or pick up Want Emu or Fallback, it connects to the server, and then now I turn the receiver on and off, it does not connect anymore.
I made all the settings inside ncam like oscam, but it did not make any difference.
But my problem is in the
CONFIGURATION --- cccam. Any changes I make in this section will not be saved.
And by restarting the receiver, it returns to the original settings
Like the image below
With me about (cccam_mcs_HB) no problem work just fine without change any things as config files in first post ...
I use config for sh4 but I don't think it is for stapi.
If possible, config for stapi that someone uses this model of receiver for me.
Also send me the settings you sent in the image for the cccam_mcs_HB.
Or a readers, send me a photo of that part.
thank you
Display MoreAs I said I am using same config on first post ...
Just I put Cline on CCcam.cfg not on Ncam.server
ncam.conf
CodeDisplay More#### "*******************************************" #### "* << RAED - fairbird >> *" #### "*******************************************" #### "****************************************************************" #### "*Read more: https://www.tunisia-sat.com/forums/threads/3539021/*" #### "****************************************************************" [global] logfile = /tmp/ncam.log clienttimeout = 12000 fallbacktimeout = 3000 bindwait = 60 netprio = 1 waitforcards = 0 maxlogsize = 1024 waitforcards = 0 waitforcards_extra_delay = 200 preferlocalcards = 1 readerrestartseconds = 1 dropdups = 1 lb_nbest_readers = 6 #[ To request import ecm from (Number) of readers ] lb_nfb_readers = 4 ecmfmt = P: c:0p:s:d:i #ECM_L:l #CW=w HOP:j disablecrccws = 1 cccam_cfg_enabled = 1 cccam_cfg_save = 1 #cccam_cfg_path = /etc cccam_cfg_repetitions_forced = 1 #cccam_cfg_reconnect_delay = 90 #cccam_cfg_reconnect_attempts = 15 [cache] max_time = 15 [cs378x] port = 13001 suppresscmd08 = 1 [newcamd] port = 12121@ key = 0102030405060708091011121314 mgclient = 1 [cccam] port = 12000 nodeid = 24D5EF28108C14E0 version = 2.3.0 reshare = 0 [streamrelay] stream_relay_enabled = 0 stream_emm_enabled = 0 stream_relay_ctab = FFFE [dvbapi] enabled = 1 au = 1 pmt_mode = 4 #[ Use 6 the Best value for (opensource) images only other images just 4] listen_port = 9000 delayer = 60 request_mode = 1 ecminfo_type = 4 user = dvbapiau #read_sdt = 1 write_sdt_prov = 1 extended_cw_api = 1 #[ (1) = OE2.2/2.5-ARM AND (2) = OE2.0-MPISEL ] boxtype = dreambox [webif] httpport = 8181 httpuser = root #httptpl = /etc/tuxbox/config/tpl/ httppiconpath = /media/ba/picon httprefresh = 30 httpshowpicons = 1 httpshowmeminfo = 1 httpshowuserinfo = 1 httpshowcacheexinfo = 1 httpshowecminfo = 1 httpshowloadinfo = 1 httpallowed = 10.0.0.0-10.255.255.255,172.16.0.0-172.31.255.255,192.168.0.0-192.168.255.255,127.0.0.1 http_status_log = 1 httputf8 = 0
ncam.server
CodeDisplay More#### "*******************************************" #### "* << RAED - fairbird >> *" #### "* Read more: https://www.tunisia-sat.com *" #### "*******************************************" #### "****************************************************************" #### "*Read more: https://www.tunisia-sat.com/forums/threads/3539021/*" #### "****************************************************************" ####################### SoftCams ######################## [reader] label = constant.cw protocol = constcw device = /etc/tuxbox/config/constant.cw caid = 2600,0B00,0B02,0500,0963,06AD,0940 group = 1 [reader] label = SoftCam.key enable = 1 protocol = emu device = /etc/tuxbox/config/SoftCam.key #/storage/.kodi/userdata/addon_data/service.softcam.ncam/config/SoftCam.Key (change with your system location) disablecrccws = 1 #disablecrccws_only_for = 0E00:000000,1708:000000;1884:000000,000065,000068,0001A0;09BE:000000 caid = 0D00,0D02,1801,0E00,4AE1,1010,0100,0500,0604,0624,0629,0652,0653,0664,0919,0926,0931,0940,0960,0961,0963,098C,09C4,09C7,090D,093E,098E,09BE,090F,091F,1802,1803,1810,1814,1815,1830,183D,183E,1861,1880,1884,0B00,0B01,0B02,0BAA,0B1C,0B1D,0B0F,0D05,0D95,0D96,0D97,0D98,5581,4AEE,4AE0,4AE1,4AFC,1010,FFFF,2600 detect = cd ident = 0100:000068,00006A,00006C,00006D,004106;0500:020A00,023800,031000,032A00,040600,040810,041700,041960,042300,042700,042800,042820,043300,043800,050100,050800,050900,030B00,50F000;0604:000000;0624:000000;0629:000000;0652:000000;0653:000000;0664:000000;0919:000000;0926:000000;0931:000000;0940:000000;0960:000000;0961:000000;0963:000000;098C:000000;09C4:000000;09C7:000000;090D:000000;093E:000000;098E:000000;09BE:000000;090F:000000;091F:000000;1802:000000;1803:000000;1810:000000;1814:005211;1815:000000;1830:000000;183D:000000;183E:000000;1861:000000;1880:000000;1884:000000;0B00:000000;0B01:000000;0B02:000000;0BAA:000000;0B1C:000000;0B1D:000000;0B0F:000000;0D05:000000,000004,000010;0D95:000000,000004;0D96:000000,000004;0D97:000000,000004;0D98:000000,000004;5581:000000;4AEE:000000;4AE0:000000,000014;4AE1:000000;4AFC:000000;1010:000000;0E00:000000;FFFF:000000;2600:000000 group = 1 emmcache = 2,1,2,1 emu_auproviders = 0500:030B00;0604:010200;0E00:000000;4AE1:000011,000014,0000FE;1010:000000;2610:000000
PERFECT CONFIGURATION
Display MoreAs I said I am using same config on first post ...
Just I put Cline on CCcam.cfg not on Ncam.server
ncam.conf
CodeDisplay More#### "*******************************************" #### "* << RAED - fairbird >> *" #### "*******************************************" #### "****************************************************************" #### "*Read more: https://www.tunisia-sat.com/forums/threads/3539021/*" #### "****************************************************************" [global] logfile = /tmp/ncam.log clienttimeout = 12000 fallbacktimeout = 3000 bindwait = 60 netprio = 1 waitforcards = 0 maxlogsize = 1024 waitforcards = 0 waitforcards_extra_delay = 200 preferlocalcards = 1 readerrestartseconds = 1 dropdups = 1 lb_nbest_readers = 6 #[ To request import ecm from (Number) of readers ] lb_nfb_readers = 4 ecmfmt = P: c:0p:s:d:i #ECM_L:l #CW=w HOP:j disablecrccws = 1 cccam_cfg_enabled = 1 cccam_cfg_save = 1 #cccam_cfg_path = /etc cccam_cfg_repetitions_forced = 1 #cccam_cfg_reconnect_delay = 90 #cccam_cfg_reconnect_attempts = 15 [cache] max_time = 15 [cs378x] port = 13001 suppresscmd08 = 1 [newcamd] port = 12121@ key = 0102030405060708091011121314 mgclient = 1 [cccam] port = 12000 nodeid = 24D5EF28108C14E0 version = 2.3.0 reshare = 0 [streamrelay] stream_relay_enabled = 0 stream_emm_enabled = 0 stream_relay_ctab = FFFE [dvbapi] enabled = 1 au = 1 pmt_mode = 4 #[ Use 6 the Best value for (opensource) images only other images just 4] listen_port = 9000 delayer = 60 request_mode = 1 ecminfo_type = 4 user = dvbapiau #read_sdt = 1 write_sdt_prov = 1 extended_cw_api = 1 #[ (1) = OE2.2/2.5-ARM AND (2) = OE2.0-MPISEL ] boxtype = dreambox [webif] httpport = 8181 httpuser = root #httptpl = /etc/tuxbox/config/tpl/ httppiconpath = /media/ba/picon httprefresh = 30 httpshowpicons = 1 httpshowmeminfo = 1 httpshowuserinfo = 1 httpshowcacheexinfo = 1 httpshowecminfo = 1 httpshowloadinfo = 1 httpallowed = 10.0.0.0-10.255.255.255,172.16.0.0-172.31.255.255,192.168.0.0-192.168.255.255,127.0.0.1 http_status_log = 1 httputf8 = 0
ncam.server
CodeDisplay More#### "*******************************************" #### "* << RAED - fairbird >> *" #### "* Read more: https://www.tunisia-sat.com *" #### "*******************************************" #### "****************************************************************" #### "*Read more: https://www.tunisia-sat.com/forums/threads/3539021/*" #### "****************************************************************" ####################### SoftCams ######################## [reader] label = constant.cw protocol = constcw device = /etc/tuxbox/config/constant.cw caid = 2600,0B00,0B02,0500,0963,06AD,0940 group = 1 [reader] label = SoftCam.key enable = 1 protocol = emu device = /etc/tuxbox/config/SoftCam.key #/storage/.kodi/userdata/addon_data/service.softcam.ncam/config/SoftCam.Key (change with your system location) disablecrccws = 1 #disablecrccws_only_for = 0E00:000000,1708:000000;1884:000000,000065,000068,0001A0;09BE:000000 caid = 0D00,0D02,1801,0E00,4AE1,1010,0100,0500,0604,0624,0629,0652,0653,0664,0919,0926,0931,0940,0960,0961,0963,098C,09C4,09C7,090D,093E,098E,09BE,090F,091F,1802,1803,1810,1814,1815,1830,183D,183E,1861,1880,1884,0B00,0B01,0B02,0BAA,0B1C,0B1D,0B0F,0D05,0D95,0D96,0D97,0D98,5581,4AEE,4AE0,4AE1,4AFC,1010,FFFF,2600 detect = cd ident = 0100:000068,00006A,00006C,00006D,004106;0500:020A00,023800,031000,032A00,040600,040810,041700,041960,042300,042700,042800,042820,043300,043800,050100,050800,050900,030B00,50F000;0604:000000;0624:000000;0629:000000;0652:000000;0653:000000;0664:000000;0919:000000;0926:000000;0931:000000;0940:000000;0960:000000;0961:000000;0963:000000;098C:000000;09C4:000000;09C7:000000;090D:000000;093E:000000;098E:000000;09BE:000000;090F:000000;091F:000000;1802:000000;1803:000000;1810:000000;1814:005211;1815:000000;1830:000000;183D:000000;183E:000000;1861:000000;1880:000000;1884:000000;0B00:000000;0B01:000000;0B02:000000;0BAA:000000;0B1C:000000;0B1D:000000;0B0F:000000;0D05:000000,000004,000010;0D95:000000,000004;0D96:000000,000004;0D97:000000,000004;0D98:000000,000004;5581:000000;4AEE:000000;4AE0:000000,000014;4AE1:000000;4AFC:000000;1010:000000;0E00:000000;FFFF:000000;2600:000000 group = 1 emmcache = 2,1,2,1 emu_auproviders = 0500:030B00;0604:010200;0E00:000000;4AE1:000011,000014,0000FE;1010:000000;2610:000000
I tested your config and entered cccam.cfg. And one of the servers connects but the one with the sky de package does not connect.
And when I edit and save the cfg account via webif, a file is saved in ncam.server.
Can I import this model?
[reader]
label = 213.232.126.32_21000_dfdfdf
protocol = cccam
device = 213.232.126.32,21000
user = usser
password = pass
inactivitytimeout = 30
group = 64
disablecrccws = 1
cccversion = 2.3.2
audisabled = 1
It seems that only this server does not connect and sky de does not open. Do I have to enter special settings? Because it does not open for youI have channels with this ncam without any freezes and it is better for me than oscam.
Thank you for your support and help.
And one of the problems I had was importing an account in cfg and going to webif and editing readers.
The previous reader remains and another one is added.
There is a possibility of interference and the previous one cannot be deleted.
NCam super
Fairbird
Thank you so much you are super
TVheadend - OpenPLİ PC-TV
config dosyası şu şekil
[dvbapi]
enabled = 1
au = 1
pmt_mode = 4
listen_port = 9000
delayer = 60
ecminfo_type = 4
user = dvbapi
read_sdt = 1
write_sdt_prov = 1
extended_cw_api = 1
boxtype = pc,dreambox I have to change the pc when I run the dreambox, what should I do to get 2 of them running at the same time?About (boxtype) You can not set two different names of device type (only one) depend on what you are using ..
What i set if using ubuntu pc linux?
Don’t have an account yet? Register yourself now and be a part of our community!
