Ncam Emu compiled and patched by RAED

Dear Professor / fairbird

Firstly a thousand thanks for this wonderful work

Please, this topic appeared in the forum, what is this, is it the same emu or does it have other additions

Forum topic link

ncam 11.00

Eurosport channels on the Hotbird satellite, 13 degrees east, do not open in Viaccess with NCam V11. What is not configured correctly? Thanks in advance for your response.

Quote from fairbird

Quote from geisivi

cortexa9hf doesn’t work on image pure2 (ssl-111g).

10.9 ssl11 version work ok.

Please to send it manually ... If you sent it manually please delete it.

1-download and install ipk file

2-after installed do restart enigma2

3-Then from telnet give this commands and give me this result

Code

ls -n /usr/bin/cam/ncam
cd /usr/bin/cam
./ncam

4-Also look in /tmp directory If you find ncam.log then the emu works (please send to me the log of ncam)

Display More

I can't find ipk cortexa9... file.

I put bin file in /usr/bin/cam, and from telnet I have this.

67f2daaeb0d9286.png

And I find why doesn't work.

pure2 image or ncam don't have libcrypto.so.1.0.0.

pure2 has ssl-111g

Thanks

Quote from fairbird

In first post there is only one file ipk (for all images all devices)

Ncam-Images-MIPS-IPK (For All devices that use ipk system)

That one for your device please use it ... then post the result ..

Ncam not depend on openssl any more (just you need to install libcrypto)

Ipk file can do every things (just downlaod it and install)

Here is my DM920 (same your device cpu (ARMv7) on PureE2 6.4 after install ipkg ncam work just fine ...

Code

root@dm920:~# opkg install /tmp/*.ipk
Installing enigma2-plugin-softcams-ncam-mips (V11.0) on root.
OE2.0 IMAGES: libssl1.1
OE2.0 IMAGES: libcrypto1.1
Configuring enigma2-plugin-softcams-ncam-mips.
:Your Device IS ARM processor ...
PURE2 image
[ All Config Files found ]


-------------------------------------------------------
* Ncam Config & Softcam files in [/etc/tuxbox/config] *
-------------------------------------------------------


*******************************************
*             Install Finished            *
*                                         *
*         Need To Restart Enigma2         *
*                                         *
*       Patched and compile By RAED       *
*******************************************
root@dm920:~# cd /usr/bin/cam 
root@dm920:/usr/bin/cam# ./ncam
root@dm920:/usr/bin/cam#
root@dm920:/usr/bin/cam# ls -n /tmp/ncam*
-rw-r--r--    1 0        0            83691 May 28 18:51 /tmp/ncam.log

Display More

140300eaa1f31470.jpg

Display More

With ipk file, ncam work.

With bin file it doesn't work.

Thanks!

Whats the diference between ncam.bin and ncam.ipk ?

What can I do for ncam.bin work? I prefer use bin files than ipk files.

Quote from fairbird

The bin file is the same one in ipk file ... Nothing different ...

The different is ipk scripts detect the image and search to version of libcrypto in image and make correct symlink ...

This is the matter in a nutshell.

Code

if grep -qs 'Package: libcrypto1.1' cat /var/lib/opkg/status ; then
    echo "$images libcrypto1.1"
    ln -s libcrypto.so.1.1 /usr/lib/libcrypto.so.1.0.0 > /dev/null 2>&1
    ln -s libcrypto.so.1.1 /usr/lib/libcrypto.so.0.9.8 > /dev/null 2>&1
    ln -s libcrypto.so.1.1 /usr/lib/libcrypto.so.0.9.7 > /dev/null 2>&1
fi

Ok. Now I understand.

Thanks a lot!

Quote from KissPlus

Eurosport channels on the Hotbird satellite, 13 degrees east, do not open in Viaccess with NCam V11. What is not configured correctly? Thanks in advance for your response.

same issue for me. not open. always goes to no**va caid 0604. but i have 041f00 and 0068 and 0b00 obo1 but cant open esp 1 and 2

thanx for your ncam with cccam cfg, but its not connecting with location path of etc/cccam.cfg plz share with default location

Dear fairbird

cortexa9hf-vfp-neon-ARM (DreamoxUHD + VU+4K + Routers Mipsel DD-WRT

(aarch64-ARM (VU+4K Duo4K + osmio4k

none of them work on k1plus s905 box with version 11.0

it was working before on 10.9

Quote from fairbird

You are using wrong bin file

cortexa9hf-vfp-neon-ARM

and

(aarch64-ARM (VU+4K Duo4K + osmio4k

It is for E2 devices

And your box is Android not E2 ..

You need to use one of those bin files under

*****************************************************************************

************** Bin files for Android Devices Only **************
*****************************************************************************

Display More

Android files don't work,too.I use coreelec dear fairbird not android part. Normally with 10.9 version ncam.cortexa9hf-vfp-neon-Openssl-1 and ncam.cortexa9hf-vfp-neon-Openssl-1-static bin files working fine with coreelec.

Quote from fairbird

As I said Those file not for Android (it is for E2) and need libcrypto

Please read this my replay ....

Ncam Emu compiled and patched by READ

So please first check you software is (Android or E2) ?!

Ok.I'll check my software.I know it's not e2 or android.my software is coreelec my friend like libreelec or alexelec and I'll check if they use libcrypto.I've tested ncam.cortexa9hf-vfp-neon 10.9 and it didn't work.it's strange.

-- working files for me which you share before are here.

https://www.linuxsat-support.c…f-vfp-neon-openssl-1-zip/

https://www.linuxsat-support.c…f-vfp-neon-openssl-1-zip/

Ok thank you fairbird for your libcrypt suggestion .I've forgotten to mention that I'm using tvheadend as software.I've solved the problem with copying lib files to "./kodi/addons/service.tvheadend43/lib" folder.It's now working ncam.cortexa9hf-vfp-neon_v11 on k1plus s905 on coreelec with tvheadend

Here is the file

lib.zip

I'm assuming this can be used for VM as well? Do we need to add caid for disabling CW?

pls help

sh4 read c line but no movie play no picture

I changed the DreamBox to DuckBox