Ncam Emu compiled and patched by RAED
-
- NCam RAED
- fairbird
- Thread is marked as Resolved.
-
-
hola, ¿no tienes soporte pcsc?
con respecto aSi usted significa como gaviota0815 dijo
¿Cuál es su dispositivo?!
hello,raspberry pi 4
-
good morning, to be more transparent is for raspberry pi4 with omnikey 3021 card reader
regards
-
good morning, to be more transparent is for raspberry pi4 with omnikey 3021 card reader
regards
try please and give feedback
-
Add in first post new link to support Icone-Iron-stapi
-
I tried again with several settings but again my problem was not solved.
Looks like the problem is with cccam_mcs_HB.
I tested it once with oscam and the skysport 2 channel opened.
And once with the same settings and with your ncam I tested that it did not open.
And once I tested with your settings and your ncam that it did not open.
I also tested with Mr. mohamad-os ncam, which was the same problem.
The problem is not with the settings, but with the ncam emulator itself
-
I tried again with several settings but again my problem was not solved.
Looks like the problem is with cccam_mcs_HB.
I tested it once with oscam and the skysport 2 channel opened.
And once with the same settings and with your ncam I tested that it did not open.
And once I tested with your settings and your ncam that it did not open.
I also tested with Mr. mohamad-os ncam, which was the same problem.
The problem is not with the settings, but with the ncam emulator itself
Ok ... I will see what can I do ... Thank you for feedbck
and please send full ncam.log
-
I tried again with several settings but again my problem was not solved.
Looks like the problem is with cccam_mcs_HB.
I tested it once with oscam and the skysport 2 channel opened.
And once with the same settings and with your ncam I tested that it did not open.
And once I tested with your settings and your ncam that it did not open.
I also tested with Mr. mohamad-os ncam, which was the same problem.
The problem is not with the settings, but with the ncam emulator itself
Ok ... I will see what can I do ... Thank you for feedbck
and please send full ncam.log
thank you
This is also the log file
-
I think the problem is that the server is not supported because it writes multics hellboy revision r30 on an unidentified server
And writes to the server that is detected
multics revision r82
-
Don't use oscam (options) file with ncam emu ...
There is more different now ..
Oscam does not have CCcam.cfg feature
So just use our files not oscam files ...
See here all my Cline connected without any error ...
-
Please also test this option and see what happens .. If still issue send ncam.log
in nca.config
in ncam.server
Code
Display More[reader] label = myCcCam protocol = cccam device = 213.232.126.33,22000 user = xxxx password = xxxx inactivitytimeout = 30 group = 1 cccversion = 2.3.2 [reader] label = myCcCam2 protocol = cccam device = 213.232.126.32,21000 user = xxxx password = xxxx inactivitytimeout = 30 group = 1 cccversion = 2.3.2
and in ncam.user
-
good morning, to be more transparent is for raspberry pi4 with omnikey 3021 card reader
regards
try please and give feedback
thanks for sharing
installed and it gives me error
root@sapillero:~# /var/emu/./ncam1: error while loading shared libraries: libcrypto.so.0.9.8: cannot open shared object file: No such file or directory
-bash: /var/emu/./ncam1:: No such file or directory
-
-
The Clines are showing in Webif but they are OFF.No channel opens only from ncam.server not from cccam.cfg.
-
good morning, to be more transparent is for raspberry pi4 with omnikey 3021 card reader
regards
try please and give feedback
thanks for sharing
installed and it gives me error
root@sapillero:~# /var/emu/./ncam1: error while loading shared libraries: libcrypto.so.0.9.8: cannot open shared object file: No such file or directory
-bash: /var/emu/./ncam1:: No such file or directory
You must install libcrypto 0.9.8
-
good morning, to be more transparent is for raspberry pi4 with omnikey 3021 card reader
regards
try please and give feedback
thanks for sharing
installed and it gives me error
root@sapillero:~# /var/emu/./ncam1: error while loading shared libraries: libcrypto.so.0.9.8: cannot open shared object file: No such file or directory
-bash: /var/emu/./ncam1:: No such file or directory
You have missing libcrypto.so.0.9.8 ...
Give this command on telnet and give the result
The Clines are showing in Webif but they are OFF.No channel opens only from ncam.server not from cccam.cfg.
Please upload screenshot and send ncam.log
-
Update ...
Ncam V11.1
Code
Display More23-07-2020 -Add support powervu for android device ## New feature -Add wi_socket_id option ## New option -Add repetitions_forced option to enable/disable CCcam.cfg work ## New option -Correction some codes -Newcamd/NCam Stealth mode -Some edit with ncam webinterface(http://IP-device:8181/readers.html) -Some cusomize for MgCamd -Skip CWs checksum updated -android cccam connection fixed *(built without libcrypto: (cccam) cccam(r): login failed, usr/pwd invalid) -updated cx-aio-v09.2.5 -Try to compress bin files by UPX with scripts method (Beta TEST)
P.s: For Android device. There is new option show (wi_socket_id) under (Configuration > Dvb-Api > wi socket id) to select Correct socket (-1 or 0 or 1 or 2 ... etc)
All files download links from first post
Where is the bin file for linux pc x64 ? plz upload package.
AS I mentioned all files link you can find it in first post ....
i reply after check. first post is ncam 11 r1 not 11.1 can you please check it or update me.
-
Please also test this option and see what happens .. If still issue send ncam.log
in nca.config
in ncam.server
Code
Display More[reader] label = myCcCam protocol = cccam device = 213.232.126.33,22000 user = xxxx password = xxxx inactivitytimeout = 30 group = 1 cccversion = 2.3.2 [reader] label = myCcCam2 protocol = cccam device = 213.232.126.32,21000 user = xxxx password = xxxx inactivitytimeout = 30 group = 1 cccversion = 2.3.2
and in ncam.user
I tried all the settings you made but failed.
It seems that the problem is that the multics hellboy revision r30 server is not recognized in ncam.
If possible, someone who uses this type of server can test.
Most likely the problem is with ncam.
Thanks for posting.
-
i reply after check. first post is ncam 11 r1 not 11.1 can you please check it or update me
Which link exactly ?! What ncam you have download it and You got it v 11.0 ?!
-
Please also test this option and see what happens .. If still issue send ncam.log
in nca.config
in ncam.server
Code
Display More[reader] label = myCcCam protocol = cccam device = 213.232.126.33,22000 user = xxxx password = xxxx inactivitytimeout = 30 group = 1 cccversion = 2.3.2 [reader] label = myCcCam2 protocol = cccam device = 213.232.126.32,21000 user = xxxx password = xxxx inactivitytimeout = 30 group = 1 cccversion = 2.3.2
and in ncam.user
I tried all the settings you made but failed.
It seems that the problem is that the multics hellboy revision r30 server is not recognized in ncam.
If possible, someone who uses this type of server can test.
Most likely the problem is with ncam.
Thanks for posting.
Form my side I can not test ti I don't have Cline with CCcam.mcs.hb to test it
NCam Support Forum
Configs, discussion, downloads and guides for NCam Softcam.
Participate now!
Don’t have an account yet? Register yourself now and be a part of our community!