My Ncam 12.6 works continuously for 3 to 4 hours and picture(AFN) goes blank again and could remain blank for a very long time..been happening for past few days....
Any solution?
My Ncam 12.6 works continuously for 3 to 4 hours and picture(AFN) goes blank again and could remain blank for a very long time..been happening for past few days....
Any solution?
Display MoreDisplay MoreDisplay MoreDisplay MoreJust another few annoying questions.
Is the expierd key detection in the binary?
Perhaps a line in the config that triggers it?
What would I look for in live log that tells me we are loading new keys?
I just did a manual restart of ncam after invalid keys and all zeroes for ecm.
Valid keys are in the Internet .keys files and is decoding.
Should it not have restarted itself?
Also. Do you think there will ever be a way to tell what particular key is being used at a given time?
Thanks!Edit:
After several hours I did not see signs of any new Internet keys being downloaded in the respective sub directories.
And 006D was not clearing. I performed a manual restart and the keys were refreshed, the channel cleared.
Again, from reading the algorithm.
Is ncam not supposed the check for not clearing channels and perform an automatic download, then refresh.
Or restart ncam in an attempt to see if the new files clear the channels, then if not.
Do it again after a delay in time?
What would a phrase be to target when the operation triggered?
And if the operation is not happening. What to look for in configurations?
Good questions? Yes??
pasted-from-clipboard.png###
There is no valid key for this channel in KeyData (SoftCam.Key).
###
Automatically downloads keys if label = github:JetCamFastCam/JetFastCamRza/main/SoftCam.Key
###
###
Key is invalid. (because the keys are expired or invalid)
###
Since the key is invalid and not found,
rejected group because Loadbalancer is on and disables the reader for setup time...
in my case:
###
Redownload keys, (after about 5 minutes)
(And new valid keys arrived and ECM are fine now...)
###
the problem its that ecm key are posted more fast at forums and more late on teams links/url
the best solution its made a plugin like biscotto for add ecm key manually with remote controll...
At the end of the day, either a plugin or a github account will need maintaining by someone entering the correct key, normally manually.
Even if you were to scrap the websites that often provide valid keys, your not always going to be up to date.
TBH i dont even get the what is so great about AFN, they mostly have content that can be found on other sats anyways, it is hardly PPV content.
it's tough, to get it perfectly working since 12.6 did add something like using labels vs devices only downloaded once for every startup vs labels it only downloaded when afn is tune in for working key, just not sure it work having more links in simultaneous downloading keys that cause my end to crash often when channel is tune...jesus, what kind countereffort AFN network they cook up now...this channels are very odd , it's like directv days again...when card work they only last few hours until black screen again...then reprogram the card ...work again then crash again after 15 minutes ...
2 hours later : after many trial and error, this settings i find best so far, i have to disable all extra readers is not necessary to have it enable like newcamd and cccam ...it looks like it may interfere with github command during downloading key process or not, and also, not sure it super stable with more than 3 github cams, so far i have test it with one only, then 2, at first i thought it was gonna crash until starting turning everything off, including necamd and cccams servers that ncam have habit turning it on automatic, i would just delete them since i never gonna use them in my situation since my arc in western hemisphere , not in eastern part that mostly people otherside depend on them while my side hardly used them that we very depend on emulators and internet softcams is too new for me
also, on loadbalanacer settings, i did add more than 4 cam readers ...maybe that was the problem in beginning when starting add more github readers, then hell broke loose on my sat receiver that starting to crash ncam sudden, so i did everything i did past 24hours by troubleshooting my end and this come to my final conclusion that it is working right now with these settings plus ncam.server settings include the attachment
i would thank everyone for making this possible now, if this working stable like now, i believe this method gonna open more doors in other areas that not just afn, but like other sats that need other than pv keys, like biss and tanberg , etc... this might be best idea so far yet
Update ...
Ncam V12.8
-This version is for AFN keys for NCam supported by the linuxsat-support.com team (Thank you).
So we can get key updates more quickly. And more results from different sites.
[reader]
label = linuxsat-support.com
enable = 1
protocol = emu
device = emulator
#device = http...
disablecrccws_only_for = 0E00:000000
caid = 0500,0604,090F,0E00,1010,1801,2600,2602,2610,4AE1
detect = cd
ident = 0500:000000,007400,007800,021110,023800;0604:000000;090F:000000;0E00:000000;1010:000000;1801:000000,001101,002111,007301;2600:000000;2602:000000;2610:000000;4AE1:000011,000014,0000FE
group = 1
emmcache = 2,1,2,1
emu_auproviders = 0604:010200;0E00:000000;1010:000000;2610:000000;4AE1:000011,000014,0000FE
Display More
any add 098d sky de and block 09c4
it still dark mode
url/link for device?? or no need?
url/link for device?? or no need?
Download the latest version 12.7 and choose the device as you like...
;
but if device=emulator... it takes ecm from my own softcamkey file....?¿
i dont understand the feeling of this ncam... its possible explain....
yes, device=emulator takes the ecm keys from the softcam.key file
but if they are not present in your softcam.key file,
NCam-12.7 will download the keys Automatically from here: LSS Forum.
###
you can use also: device = url if you want to update other keys like : BISS,..etc.
...???
####
Download the new config files are updated here: Ncam Emu compiled and patched by READ
and you will find the new reader added
;
Download the new config files are updated here: Ncam Emu compiled and patched by READ
and you will find the new reader added
Or Add this new reader in ncam.server :
############ This is private reader don't change it or remove it ############
[reader]
label = linuxsat-support.com
enable = 1
protocol = emu
device = emulator
#device = http...
disablecrccws_only_for = 0E00:000000
caid = 0500,0604,090F,0E00,1010,1801,2600,2602,2610,4AE1
detect = cd
ident = 0500:000000,007400,007800,021110,023800;0604:000000;090F:000000;0E00:000000;1010:000000;1801:000000,001101,002111,007301;2600:000000;2602:000000;2610:000000;4AE1:000011,000014,0000FE
group = 1
emmcache = 2,1,2,1
emu_auproviders = 0604:010200;0E00:000000;1010:000000;2610:000000;4AE1:000011,000014,0000FE
;
Display MoreDownload the new config files are updated here: Ncam Emu compiled and patched by READ
and you will find the new reader added
Or Add this new reader in ncam.server :
############ This is private reader don't change it or remove it ############
[reader]
label = linuxsat-support.com
enable = 1
protocol = emu
device = emulator
#device = http...
disablecrccws_only_for = 0E00:000000
caid = 0500,0604,090F,0E00,1010,1801,2600,2602,2610,4AE1
detect = cd
ident = 0500:000000,007400,007800,021110,023800;0604:000000;090F:000000;0E00:000000;1010:000000;1801:000000,001101,002111,007301;2600:000000;2602:000000;2610:000000;4AE1:000011,000014,0000FE
group = 1
emmcache = 2,1,2,1
emu_auproviders = 0604:010200;0E00:000000;1010:000000;2610:000000;4AE1:000011,000014,0000FE
;
Thanks, anyway is it different from what is already in the ipk file...seen similar configuration in my server.. please explain more....
Cleared now .. thanks again Fairbird!!
Don't expect that he will fix the Sky DE problem.
My device Openbox AS4K CI Pro+ (android 7 stapi)
I used private reader, black screen no update keys
2022-07-15 13:58:28 15831F5F r (emu) Key not found or invalid: P ****006A 01
2022-07-15 13:58:28 15831F5F r (emu) ECM failed: Key not found
2022-07-15 13:58:28 5555197C c (ecm) satxtreme (P: 0E00:000000:006A:1784:0000: #ECM_L:99 #CW=00000000000000000000000000000000 HOP:00): not found (2 ms) by linuxsat-support.com (lg)
2022-07-15 13:58:29 5555197C c (dvbapi) Demuxer 0 restarting decoding requests after 1 ms with 1 enabled and 1 disabled ecmpids!
2022-07-15 13:58:29 5555197C c (dvbapi) Demuxer 0 trying to descramble PID 1 CAID 0E00 PROVID 000000 ECMPID 1784 ANY CHID PMTPID 0000 VPID 0555
2022-07-15 13:58:34 5555197C c (ecm) satxtreme (P: 0E00:000000:006A:1784:0000: #ECM_L:99 #CW=00000000000000000000000000000000 HOP:00): rejected group (0 ms) (no matching reader)
2022-07-15 13:58:39 5555197C c (-) -- Skipped 1 duplicated log lines --
2022-07-15 13:58:39 5555197C c (dvbapi) Demuxer 0 restarting decoding requests after 0 ms with 1 enabled and 1 disabled ecmpids!
2022-07-15 13:58:39 5555197C c (dvbapi) Demuxer 0 trying to descramble PID 1 CAID 0E00 PROVID 000000 ECMPID 1784 ANY CHID PMTPID 0000 VPID 0555
2022-07-15 13:58:48 5555197C c (ecm) satxtreme (P: 0E00:000000:006A:1784:0000: #ECM_L:99 #CW=00000000000000000000000000000000 HOP:00): rejected group (0 ms) (no matching reader)
2022-07-15 13:58:51 5555197C c (-) -- Skipped 1 duplicated log lines --
2022-07-15 13:58:51 5555197C c (dvbapi) Demuxer 0 restarting decoding requests after 0 ms with 1 enabled and 1 disabled ecmpids!
2022-07-15 13:58:51 5555197C c (dvbapi) Demuxer 0 trying to descramble PID 1 CAID 0E00 PROVID 000000 ECMPID 1784 ANY CHID PMTPID 0000 VPID 0555
2022-07-15 13:58:58 5555197C c (ecm) satxtreme (P: 0E00:000000:006A:1784:0000: #ECM_L:99 #CW=00000000000000000000000000000000 HOP:00): rejected group (0 ms) (no matching reader)
2022-07-15 13:59:04 5555197C c (ecm) satxtreme (P: 0E00:000000:006A:1784:0000: #ECM_L:99 #CW=00000000000000000000000000000000 HOP:00): rejected group (1 ms) (no matching reader)
2022-07-15 13:59:04 5555197C c (dvbapi) Demuxer 0 restarting decoding requests after 0 ms with 1 enabled and 1 disabled ecmpids!
2022-07-15 13:59:04 5555197C c (dvbapi) Demuxer 0 trying to descramble PID 1 CAID 0E00 PROVID 000000 ECMPID 1784 ANY CHID PMTPID 0000 VPID 0555
2022-07-15 13:59:08 5555197C c (ecm) satxtreme (P: 0E00:000000:006A:1784:0000: #ECM_L:99 #CW=00000000000000000000000000000000 HOP:00): rejected group (0 ms) (no matching reader)
2022-07-15 13:59:17 5555197C c (-) -- Skipped 1 duplicated log lines --
2022-07-15 13:59:17 5555197C c (dvbapi) Demuxer 0 restarting decoding requests after 1 ms with 1 enabled and 1 disabled ecmpids!
2022-07-15 13:59:17 5555197C c (dvbapi) Demuxer 0 trying to descramble PID 1 CAID 0E00 PROVID 000000 ECMPID 1784 ANY CHID PMTPID 0000 VPID 0555
2022-07-15 13:59:19 15831F5F r (emu) Key not found or invalid: P ****006A 01
Display More
2022-07-15 13:59:19 15831F5F r (emu) Key not found or invalid: P ****006A 01
means that the key 01 not posted again ....that's why you have black screen
you need to wait untill someone post the key then NCam-12.7 will download it.
######
;
Display More2022-07-15 13:59:19 15831F5F r (emu) Key not found or invalid: P ****006A 01
means that the key 01 not posted again ....that's why you have black screen
you need to wait untill someone post the key then NCam-12.7 will download it.
######
;
No, this is not the problem, this version does not work on android 7 stapi devices
Display MoreDisplay More2022-07-15 13:59:19 15831F5F r (emu) Key not found or invalid: P ****006A 01
means that the key 01 not posted again ....that's why you have black screen
you need to wait untill someone post the key then NCam-12.7 will download it.
######
;
No, this is not the problem, this version does not work on android 7 stapi devices
post a screenshot of your readers
its not enough, ncam.sever
[reader]
label = Device_SoftCam
protocol = emu
device = emulator
disablecrccws_only_for = 0E00:000000
caid = 0E00,0500,0604,090F,1010,1801,2600,4AE1
detect = cd
ident = 0500:000000,007400,007800,021110,023800;0604:000000;090F:000000;0E00:000000;1010:000000;1801:000000,001101,002111,007301;2600:000000;4AE1:000011,000014,0000FE
group = 1
emmcache = 2,1,2,1
emu_auproviders = 0604:010200;0E00:000000;1010:000000;4AE1:000011,000014,0000FE
[reader]
label = Internet_SoftCam
protocol = emu
device = https://raw.githubusercontent.com/MOHAMED19OS/SoftCam_Emu/main/Enigma2/SoftCam.Key
disablecrccws_only_for = 0E00:000000
caid = 0500,0604,090F,0E00,1010,1801,2600,2602,2610,4AE1
detect = cd
ident = 0500:000000,007400,007800,021110,023800;0604:000000;090F:000000;0E00:000000;1010:000000;1801:000000,001101,002111,007301;2600:000000;2602:000000;2610:000000;4AE1:000011,000014,0000FE
group = 1
emmcache = 2,1,2,1
emu_auproviders = 0604:010200;0E00:000000;1010:000000;2610:000000;4AE1:000011,000014,0000FE
[reader]
label = linuxsat-support.com
protocol = emu
device = emulator
disablecrccws_only_for = 0E00:000000
caid = 0500,0604,090F,0E00,1010,1801,2600,2602,2610,4AE1
detect = cd
ident = 0500:000000,007400,007800,021110,023800;0604:000000;090F:000000;0E00:000000;1010:000000;1801:000000,001101,002111,007301;2600:000000;2602:000000;2610:000000;4AE1:000011,000014,0000FE
group = 1
emmcache = 2,1,2,1
emu_auproviders = 0604:010200;0E00:000000;1010:000000;2610:000000;4AE1:000011,000014,0000FE
Display More
All the configs can be found in the main ncam thread, as posted above.
You must also be on ncam version 12.7
Don’t have an account yet? Register yourself now and be a part of our community!