Pretty sure anything Kodi uses TVHeadend. Not sure anyone has gotten TVH working yet. The stream relay method is closely tied to E2 and even then only some images work.
Ncam Emu compiled and patched by RAED
-
- NCam RAED
- fairbird
- Thread is marked as Resolved.
-
-
Will this hack ever not require stream relay?
According to the OSCAM-EMU wiki...
QuoteStream Relay is software descrambling through internal streaming. It can be used for watching PowerVu channels (on old receivers not supporting the extended cw), or for channels using other unconventional encryption systems like Compel or Rosscrypt1.
Will the extended cw get updated to support icam?
-
Ncam V13.1 will only work on open based images.
There is a need to implement that ECMs come through DVBAPI otherwise it won't work on DreamOS, NN², etc. .
-
I have mecool kIII with enigma2 vitmod os. Is just update files and will work, or need to do anye other steps.
-
Ncam V13.1 will only work on open based images.
There is a need to implement that ECMs come through DVBAPI otherwise it won't work on DreamOS, NN², etc. .
Must be edit on enigma2 source .. Opendreambox team should be do that same as open source image.
-
Will this hack ever not require stream relay?
According to the OSCAM-EMU wiki...
QuoteStream Relay is software descrambling through internal streaming. It can be used for watching PowerVu channels (on old receivers not supporting the extended cw), or for channels using other unconventional encryption systems like Compel or Rosscrypt1.
Will the extended cw get updated to support icam?
I dont claim to understand the patch entirely, but i can see enough of it to understand it is a hack rather than a fix.
They are having to use stream relay to mask an issue with the handling of the CW / ecm.
I have said it before, years ago a lot of STB's had an issue with powerVU and those STB's had to use stream relay. Some STB's never had the issue, Dreambox being one from memory. Eventually after months / years, there was an update at STB driver level for the non compliant STB's and now nearly all no longer require stream relay for powerVU. We are now back at a similar issue with "icam". But as pointed out to me yesterday, icam is intellectual property and so doubt we will see a similar fix anytime soon.
-
-
When giving feedback through screenshots, please give more info like which receiver and image your are using. Makes it easier for fairbird to give you further support.
-
No Work ncam SSL fail my build self oscam icam 11714 works perfekt mfg
-
-
-
English bitte!
-
-
can you share your NCAM.CONF please
-
can you share your NCAM.CONF please
-
yes . you are right .. I forgot to edit a file Thank you ..
config files update in first post ..
-
Best Option with my binary and tuxbox all Others configs Trouble this is the best for me !
Code
Display Morencam.conf or oscam.conf [global] disablecrccws=1 [radegast] port=9090 allowed=127.0.0.1,192.168.0.0-192.168.255.255 user=icam [streamrelay] stream_source_port=31339 stream_relay_ctab=098D [webif] httpport=8888 http_status_log=0 httpallowed=127.0.0.1,192.168.0.0-192.168.255.255 +++ ncam.user or oscam.user [account] user=icam group=1
-
i test on openpli 8.3
not open
-
i test on openpli 8.3
not open
i use it on opli 8.3 and work perfectly -- zero4k,
are it work with you on oscam, make sure your setting is ok -- and ncam config have right stream relay values
-
i test on openpli 8.3
not open
i use it on opli 8.3 and work perfectly -- zero4k,
are it work with you on oscam, make sure your setting is ok -- and ncam config have right stream relay values
can send your config in ncamand receiver menu?!
NCam Support Forum
Configs, discussion, downloads and guides for NCam Softcam.
Participate now!
Don’t have an account yet? Register yourself now and be a part of our community!