Hello Master G
I renamed the file as instructed and it didn't work
Thanks for your effort
Hello Master G
I renamed the file as instructed and it didn't work
Thanks for your effort
I renamed the file as instructed and it didn't work
Thanks for your effort
Without screenshots or copying the live log from the web interface we're just guessing here.
Hello Master G
After so much experimenting, I ended up discovering that my CCam lines when placed in the CCcam.cfg file, in Ncam 13.5 they stop working, they stay off even if I transform them from Cccam to Ncam , but if I transform them into ( Oscam and in cam Oscam) they work fine, I found this out because I got some cccam lines from a non-paid server and Ncam 13.5 works fine with the free lines.
Don't you think it's abnormal that my lines don't work with Ncam 13.5?
By the way, how can I activate the icam?
Do I have to activate anything else?
Thanks
Don't you think it's abnormal that my lines don't work with Ncam 13.5?
Is it possible you are trying to connect with oscam and ncam at the same time? Or two devices using the same provider details at the same time?
By the way, how can I activate the icam?
icam is already active, but you need to make some changes to the image and use a special channel list to view those channels.
How about Cccam protocole ?
Mi pregunta es este tema silbe para V+ Zero?
Donde puedo conseguir un manual?
Gracias
Hola buena noche
Mi pregunta es este tema silbe para V+ Zero?
Donde puedo conseguir un manual?
Gracias
anything in English?
...or use the spanish subforum ...
Hola buena noche
Mi pregunta es este tema silbe para V+ Zero?
Donde puedo conseguir un manual?
Gracias
Yes¡
with ncam 13.4 it auto update from linuxsat
this is for users who dont know to run afn 9e
just install ncam 13.4 and run
it auto activate keys and you can run afn easily
2023-01-03 15:06:30 5BC43846 r (emu) Key loaded: P 00 F81B646ACB3ADF ###
2023-01-03 15:06:30 5BC43846 r (emu) Key loaded: P 01 F896CA866194ED ###
Hello and happy new year to all!!
What's going on with the AFN channels?
Sources are not giving keys.. 😕
Hello and happy new year to all!!
What's going on with the AFN channels?
Sources are not giving keys.. 😕
It work great, just need keep on channels until get new keys -- it take few seconds
biko what image do you use?
I have a vu zero with openatv 7.1
AFN worked for a while, now they don't open anymore. I zap to a channel and wait for hours. Key is not found.
(for some reason, after update, openatv made a new folder in /tuxbox/config/ncam, then i copied the ncam files into that folder)
biko what image do you use?
I have a vu zero with openatv 7.1
AFN worked for a while, now they don't open anymore. I zap to a channel and wait for hours. Key is not found.
(for some reason, after update, openatv made a new folder in /tuxbox/config/ncam, then i copied the ncam files into that folder)
in order for autoupdate to work in softcam.key you must have it
put it in and it will work
Edit : problem solved. Afn works fine.
I think the problem came from "softcam feed plugin".
Every time openatv updates, it replaces ncam v1.35 with another version of ncam.
I unistalled the softcam feed plugin and re-installed ncam v1.35
now this again...
I have to manually edit the new key to softcam.Key because it doesn't auto update. Is there a solution?
Any help please?
2023-01-06 20:00:25 6D6094E2 c (dvbapi) Demuxer 0 restarting decoding requests after 5 ms with 1 enabled and 1 disabled ecmpids!2023-01-06 20:00:25 6D6094E2 c (dvbapi) Demuxer 0 trying to descramble PID 1 CAID 0E00 PROVID 000000 ECMPID 17B0 ANY CHID PMTPID 13F4 VPID 07AD2023-01-06 20:00:35 326B2963 r (emu) Key not found or invalid: P ****006C 01 (channel hash: 9798A8F2)2023-01-06 20:00:35 326B2963 r (emu) Key not found or invalid: P 0009FFFF 012023-01-06 20:00:35 326B2963 r (emu) ECM failed: Key not found2023-01-06 20:00:35 11F74B01 r (emu) Key not found or invalid: P ****006C 01 (channel hash: 9798A8F2)2023-01-06 20:00:35 11F74B01 r (emu) Key not found or invalid: P 0009FFFF 012023-01-06 20:00:35 11F74B01 r (emu) ECM failed: Key not found2023-01-06 20:00:35 103B0D60 r (emu) Key not found or invalid: P ****006C 01 (channel hash: 9798A8F2)2023-01-06 20:00:35 4F3C2443 r (-) -- Skipped 1 duplicated log lines --2023-01-06 20:00:35 4F3C2443 r (emu) Key not found or invalid: P 0009FFFF 012023-01-06 20:00:35 4F3C2443 r (emu) ECM failed: Key not found2023-01-06 20:00:35 103B0D60 r (emu) Key not found or invalid: P 0009FFFF 012023-01-06 20:00:35 103B0D60 r (emu) ECM failed: Key not found2023-01-06 20:00:35 6D6094E2 c (ecm) dvbapiau (P: 0E00::006C:17B0:0000 #ECM_L:99 #CW=00000000000000000000000000000000 HOP:00): not found (15 ms) by github:smcam/s/main/SoftCam.Key
now this again...
I have to manually edit the new key to softcam.Key because it doesn't auto update. Is there a solution?
Any help please?
Code2023-01-06 20:00:25 6D6094E2 c (dvbapi) Demuxer 0 restarting decoding requests after 5 ms with 1 enabled and 1 disabled ecmpids!2023-01-06 20:00:25 6D6094E2 c (dvbapi) Demuxer 0 trying to descramble PID 1 CAID 0E00 PROVID 000000 ECMPID 17B0 ANY CHID PMTPID 13F4 VPID 07AD2023-01-06 20:00:35 326B2963 r (emu) Key not found or invalid: P ****006C 01 (channel hash: 9798A8F2)2023-01-06 20:00:35 326B2963 r (emu) Key not found or invalid: P 0009FFFF 012023-01-06 20:00:35 326B2963 r (emu) ECM failed: Key not found2023-01-06 20:00:35 11F74B01 r (emu) Key not found or invalid: P ****006C 01 (channel hash: 9798A8F2)2023-01-06 20:00:35 11F74B01 r (emu) Key not found or invalid: P 0009FFFF 012023-01-06 20:00:35 11F74B01 r (emu) ECM failed: Key not found2023-01-06 20:00:35 103B0D60 r (emu) Key not found or invalid: P ****006C 01 (channel hash: 9798A8F2)2023-01-06 20:00:35 4F3C2443 r (-) -- Skipped 1 duplicated log lines --2023-01-06 20:00:35 4F3C2443 r (emu) Key not found or invalid: P 0009FFFF 012023-01-06 20:00:35 4F3C2443 r (emu) ECM failed: Key not found2023-01-06 20:00:35 103B0D60 r (emu) Key not found or invalid: P 0009FFFF 012023-01-06 20:00:35 103B0D60 r (emu) ECM failed: Key not found2023-01-06 20:00:35 6D6094E2 c (ecm) dvbapiau (P: 0E00::006C:17B0:0000 #ECM_L:99 #CW=00000000000000000000000000000000 HOP:00): not found (15 ms) by github:smcam/s/main/SoftCam.Key
Sorry no need to do what you do ..... of course softcam is updating and key too
for that purpose ncam by fairbird do auto find soft cam and update the file for new one
see wht ncam.server have
############ This is prive reader don't change it or remove it ############
[reader]
label = linuxsat-support.com
enable = 1
protocol = emu
device = emulator
#device = http...
disablecrccws_only_for = 0E00:000000
caid = 0500,0604,090F,0E00,1010,1801,2600,2602,2610,4AE1
detect = cd
ident = 0500:000000,007400,007800,021110,023800;0604:000000;090F:000000;0E00:000000;1010:000000;1801:000000,001101,002111,007301;2600:000000;2602:000000;2610:000000;4AE1:000011,000014,0000FE
group = 1
emmcache = 2,1,2,1
emu_auproviders = 0604:010200;0E00:000000;1010:000000;2610:000000;4AE1:000011,000014,0000FE
Display More
see how soft came you have as user and can use any to auto update softcam file via a lot of sources
[reader]
label = github:smcam/s/main/SoftCam.Key
enable = 1
protocol = emu
device = emulator
disablecrccws_only_for = 0E00:000000
caid = 0500,0604,090F,0E00,1010,1801,2600,2602,2610,4AE1
detect = cd
ident = 0500:000000,007400,007800,021110,023800;0604:000000;090F:000000;0E00:000000;1010:000000;1801:000000,001101,002111,007301;2600:000000;2602:000000;2610:000000;4AE1:000011,000014,0000FE
group = 1
emmcache = 2,1,2,1
emu_auproviders = 0604:010200;0E00:000000;1010:000000;2610:000000;4AE1:000011,000014,0000FE
[reader]
label = github:AbuHaya3/Keys/main/SoftCam.Key
enable = 1
protocol = emu
device = emulator
disablecrccws_only_for = 0E00:000000
caid = 0500,0604,090F,0E00,1010,1801,2600,2602,2610,4AE1
detect = cd
ident = 0500:000000,007400,007800,021110,023800;0604:000000;090F:000000;0E00:000000;1010:000000;1801:000000,001101,002111,007301;2600:000000;2602:000000;2610:000000;4AE1:000011,000014,0000FE
group = 1
emmcache = 2,1,2,1
emu_auproviders = 0604:010200;0E00:000000;1010:000000;2610:000000;4AE1:000011,000014,0000FE
Display More
### This reader automatically downloads afn keys into memory if label = github:"and path" and if the keys are invalid or missing from the SoftCam.Key file. If you want to find the keys, use debug 2 or 4.
### If the downloaded keys are invalid or expired, the reader will automatically download them again after 5 minutes, no need to restart ncam or use external scripts.
[reader]
#label = github:"and path"
label = github:JetCamFastCam/JetFastCamRza/main/SoftCam.Key
#label = github:fairbird/MyImagesFeeds/master/SoftCam-Files/SoftCam.Key
#label = github:smcam/s/main/SoftCam.Key
#label = github:MOHAMED19OS/SoftCam_Emu/main/Enigma2/SoftCam.Key
enable = 1
protocol = emu
#device = emulator
#device = https://raw.githubusercontent.com/fairbird/MyImagesFeeds/master/SoftCam-Files/SoftCam.Key
#device = https://raw.githubusercontent.com/smcam/s/main/SoftCam.Key
#device = https://raw.githubusercontent.com/JetCamFastCam/JetFastCamRza/main/SoftCam.Key
#device = https://raw.githubusercontent.com/MOHAMED19OS/SoftCam_Emu/main/Enigma2/SoftCam.Key
disablecrccws_only_for = 0E00:000000
caid = 0500,0604,090F,0E00,1010,1801,2600,2602,2610,4AE1
detect = cd
ident = 0500:000000,007400,007800,021110,023800;0604:000000;090F:000000;0E00:000000;1010:000000;1801:000000,001101,002111,007301;2600:000000;2602:000000;2610:000000;4AE1:000011,000014,0000FE
group = 1
emmcache = 2,1,2,1
emu_auproviders = 0604:010200;0E00:000000;1010:000000;2610:000000;4AE1:000011,000014,0000FE
Display More
I wonder if someone can help me? Until now I have used ncam exclusively for powervu afn.
Today I tried to add free servers. The servers get grabbed from cccam.cfg and connect fine. However they do no work for me and I just get rejected group errors.
The same lines work in oscam when added like this.
[reader]
label = name
protocol = cccam
device = ip,port
group = 1
dropbadcws = 1
cacheex_block_fakecws = 1
user = user
password = password
ccckeepalive = 1
Here are my ncam files.
ncam.conf
[global]
disablelog = 1
logfile = /tmp/ncam.log
nice = -20
disablecrccws = 1
cccam_cfg_save = 1
cccam_cfg_repetitions_forced = 1
cccam_cfg_reconnect_delay = 90
cccam_cfg_reconnect_attempts = 10
[cache]
[dvbapi]
enabled = 1
au = 1
pmt_mode = 0
request_mode = 1
listen_port = 9001
delayer = 60
user = tvheadend
read_sdt = 1
write_sdt_prov = 1
extended_cw_api = 1
boxtype = pc
[webif]
httpport = 8888
httpallowed = 10.0.1.1-255.255.255.255
Display More
user.conf
[account]
user = tvheadend
pwd = tvheadend
monlevel = 4
au = 1
group = 1,2,3,4,5,6,7,8,9,10,64
max_connections = 99
I have no real cards and use only free servers. Can anyone tell whats going on?
Display MoreI wonder if someone can help me? Until now I have used ncam exclusively for powervu afn.
Today I tried to add free servers. The servers get grabbed from cccam.cfg and connect fine. However they do no work for me and I just get rejected group errors.
The same lines work in oscam when added like this.
Here are my ncam files.
ncam.conf
CodeDisplay More[cache] [dvbapi] enabled = 1 au = 1 pmt_mode = 0 request_mode = 1 listen_port = 9001 delayer = 60 user = tvheadend read_sdt = 1 write_sdt_prov = 1 extended_cw_api = 1 boxtype = pc
I have no real cards and use only free servers. Can anyone tell whats going on?
Change pmt_mode = 6
becouse we Use 6 as the Best value for (opensource) images only.
Other images as vti or blachole we use just 4 or 0
Edit : problem solved. Afn works fine.
I think the problem came from "softcam feed plugin".
Every time openatv updates, it replaces ncam v1.35 with another version of ncam.
I unistalled the softcam feed plugin and re-installed ncam v1.35
Yes you are right that's really happened when update image
but you can stop that by flag what you don't want to update from telnet as
FILE_NAME = your full plugin name
General
@ Stop Plug-in auto updating @
@ Star Plug-in auto updating @
will be for Ncam
when need to install new version from ncam
Don’t have an account yet? Register yourself now and be a part of our community!