Ncam Emu compiled and patched by RAED

Quote from jenseneverest

Quote from Yawwilson

johnpapad24 ! My dear friend it's the MTN package am referring to (not AFN).. and if you are right about that too then appreciate your response very much.. you could give more clarification through PM.

MTN has a problem with unmask mode, weather keys could be shared in a similar fashion to AFN ???? i don't know. Do any STB's open that package ?

its very possible since AFN works and so as GOLtv...then this will work for the rest are just having false keys from disable EMM spitting non-working keys...good news those channels last more than 3 hours that discovery keys still the same function as it was before ...just someone gonna have to brute force the hack for 48 hours long to get the correct ecm keys by making it work around the unmasking code...its like that only correct key that opens all the hashes it uses in entire group...since there is nothing special in this version...its still base same old security that requires P 00 and P 01 thats all it need for 58w discovery, 34w mtn, 103w gma network....those use the same function to open these channels

This is not opening AFN packages again since morning. What is happening?

· 2022/08/05 14:54:29 6BF48BE7 c (ecm) dvbapiau (0E00@000000/0000/006B/99:9850C272DB7CD756B396FCEEE9F7A979): found (182 ms) by serverhalil (P/2/2/2) - AFN

· 2022/08/05 14:54:29 6BF48BE7 c (ecm) dvbapiau (0E00@000000/0000/006B/99:8E662DB7697A43977991DA6C1EB97E88): found (201 ms) by serverhalil (P/2/2/2) - AFN

· 2022/08/05 14:54:32 6BF48BE7 c (ecm) dvbapiau (0E00@000000/0000/006B/99:33C1D08F8A160F21DF488B206D5BE578): found (201 ms) by serverhalil (P/2/2/2) - AFN

· 2022/08/05 14:54:42 6BF48BE7 c (ecm) dvbapiau (0E00@000000/0000/006B/99:5C212C909D7B8BA51149E02C1C7E52AE): found (171 ms) by serverhalil (P/2/2/2) - AFN

· 2022/08/05 14:54:52 6BF48BE7 c (ecm) dvbapiau (0E00@000000/0000/006B/99:D62D7F7115F091156C9C8315ABFCBE37): found (171 ms) by serverhalil (P/2/2/2) - AFN

· 2022/08/05 14:55:02 6BF48BE7 c (ecm) dvbapiau (0E00@000000/0000/006B/99:69B77F17D25B039FD62B65237219B17C): found (189 ms) by serverhalil (P/2/2/2) - AFN

· 2022/08/05 14:55:12 6BF48BE7 c (ecm) dvbapiau (0E00@000000/0000/006B/99:E22B9A77901C20581500B355B7B7F582): found (192 ms) by serverhalil (P/2/2/2) - AFN

· 2022/08/05 14:55:22 6BF48BE7 c (ecm) dvbapiau (0E00@000000/0000/006B/99:ECD8BA918006A0C3C2DC9DBC6F61C17C): found (191 ms) by serverhalil (P/2/2/2) - AFN

· 2022/08/05 14:55:32 6BF48BE7 c (ecm) dvbapiau (0E00@000000/0000/006B/99:A14F44C203DE8C5A3954024D7C3B059B): found (172 ms) by serverhalil (P/2/2/2) - AFN

Quote from Monlo

This is not opening AFN packages again since morning. What is happening?

from time to time, you need to delete ncam.cache file.

Quote from lme

Quote from Monlo

This is not opening AFN packages again since morning. What is happening?

from time to time, you need to delete ncam.cache file.

Thanks.But how/where do I locate this?

Check out the ncam config folder! Should be something like /etc/tuxbox/config

Quote from Monlo

Quote from lme

Quote from Monlo

This is not opening AFN packages again since morning. What is happening?

from time to time, you need to delete ncam.cache file.

Thanks.But how/where do I locate this?

using a program like dreambox control center, you can connect to the box internal files & open folder from above post.

I have created my own Docker image using the source found here https://github.com/fairbird/NCam

It seems to work like OSCAM with regular proxy readers but I cant figure out how this auto AFN key stuff works.

Quote from master G

Quote from Chris230291

but I cant figure out how this auto AFN key stuff works.

The linuxsat reader pulls AFN keys from the forum as and when a member posts it here.

What else do you need to know?

What I mean is I cant get it to work. It doesn't appear to be getting any keys.

I am on AFN 9.0E

2022/08/06 22:21:39 65BECCBD c   (dvbapi) Demuxer 0 ecmpid 0 CAID: 0E00 ECM_PID: 17B1 PROVID: 000000 
2022/08/06 22:21:39 65BECCBD c   (dvbapi) Demuxer 0 ecmpid 1 CAID: 5604 ECM_PID: 0BF9 PROVID: 000000 
2022/08/06 22:21:39 65BECCBD c   (dvbapi) Demuxer 0 found 2 ECM pids and 2 STREAM pids in CA PMT
2022/08/06 22:21:39 65BECCBD c   (dvbapi) Demuxer 0 trying to descramble PID 0 CAID 0E00 PROVID 000000 ECMPID 17B1 ANY CHID PMTPID 13F5 VPID 0429
2022/08/06 22:21:40 65BECCBD c      (ecm) tvheadend (0E00@000000/0000/006D/99:84208076A0F61E480C941ADD08F75E3A): rejected group (0 ms) - AFN (no matching reader)
2022/08/06 22:21:40 65BECCBD c   (dvbapi) Demuxer 0 found 2 ECM pids and 4 STREAM pids in PMT
2022/08/06 22:21:42 65BECCBD c      (ecm) tvheadend (0E00@000000/0000/006D/99:EC3B002C6EBA98B7C0C4F3241A49104E): rejected group (0 ms) - AFN (no matching reader)
2022/08/06 22:21:42 65BECCBD c   (dvbapi) Demuxer 0 restarting decoding requests after 0 ms with 1 enabled and 1 disabled ecmpids!
2022/08/06 22:21:42 65BECCBD c   (dvbapi) Demuxer 0 trying to descramble PID 0 CAID 0E00 PROVID 000000 ECMPID 17B1 ANY CHID PMTPID 13F5 VPID 0429
2022/08/06 22:21:52 65BECCBD c      (ecm) tvheadend (0E00@000000/0000/006D/99:CE625F6AECBD261E30337E6C130BCBF6): rejected group (0 ms) - AFN (no matching reader)

Quote from Chris230291

I have created my own Docker image using the source found here https://github.com/fairbird/NCam

It seems to work like OSCAM with regular proxy readers but I cant figure out how this auto AFN key stuff works.

Did you add libcurl during the build?

example Dockerfile:

RUN \
  echo "**** install build packages ****" && \
  apk add --no-cache --virtual=build-dependencies \
    gcc \
    g++ \
    libusb-dev \
    linux-headers \
    make \
    openssl-dev \
    curl-dev \
    pcsc-lite-dev \
    subversion \
    tar \
    git && \
  echo "**** install runtime packages ****" && \
  apk add --no-cache \
    ccid \
    curl \
    libcrypto1.1 \
    libssl1.1 \
    libcurl \
    libusb \
    pcsc-lite \
    pcsc-lite-libs && \
  echo "**** compile ncam ****" && \
    git clone https://github.com/fairbird/NCam.git /tmp/ncam && \
    cd /tmp/ncam && \
    ./config.sh \
        --enable all \
        --disable \
        CARDREADER_DB2COM \
        CARDREADER_INTERNAL \
        CARDREADER_STINGER \
        CARDREADER_STAPI \
        CARDREADER_STAPI5 \
        IPV6SUPPORT \
        LCDSUPPORT \
        LEDSUPPORT \
        WITH_NEUTRINO \
        WITH_SOFTCAM \
        WITH_CARDLIST && \
  make \
    CONF_DIR=/config \
    DEFAULT_PCSC_FLAGS="-I/usr/include/PCSC" \
    NO_PLUS_TARGET=1 \
    NCAM_BIN=/usr/bin/ncam \
    USE_LIBCRYPTO=1 \
    USE_LIBCURL=1 \
    pcsc-libusb && \
  echo "**** fix broken permissions from pcscd install ****" && \
  chown root:root \
    /usr/sbin/pcscd && \
  chmod 755 \
    /usr/sbin/pcscd && \
  echo "**** install PCSC drivers ****" && \
  mkdir -p \
    /tmp/omnikey && \
  curl -o \
  /tmp/omnikey.tar.gz -L \
    https://www.hidglobal.com/sites/default/files/drivers/ifdokccid_linux_x86_64-v4.2.8.tar.gz && \
  tar xzf \
  /tmp/omnikey.tar.gz -C \
    /tmp/omnikey --strip-components=2 && \
  cd /tmp/omnikey && \
  ./install && \
  echo "**** fix group for card readers and add abc to dialout group ****" && \
  groupmod -g 24 cron && \
  groupmod -g 16 dialout && \
  usermod -a -G 16 abc && \
  echo "**** cleanup ****" && \
  apk del --purge \
    build-dependencies && \
  rm -rf \
    /tmp/*

master G Yes, well I just used the default emu reader.

Thanks fegol it works now I added those packages.

When I reload readers (http://10.0.1.200:8889/readers.html?action=reloadreaders), my emu reader disappears. Its still in the ncam.server file and a restart brings it back. Is this a bug?

So what's the difference between the cccam.cfg and ncam.fs files?

I guess one is for lines that you were given and the other for free servers, but do they operate differently from each other?

ncam.fs == CCcam.cfg

;

So its just 2 different names for the same thing?

I had a look at the source (I don't understand C). It seems that the same read function is used for both files?

I wonder what the point is?

Quote from Chris230291

So its just 2 different names for the same thing?

I had a look at the source (I don't understand C). It seems that the same read function is used for both files?

I wonder what the point is?

Yes, same function with different file names.

You can specify another path to the CCcam.cfg file in the configuration.

ncam.fs is only in the config folder.

up to you...