install Enigma2 Image on the external flash by Plugin Nfr4X Multiboot of opennfr in Spark Devices

Quote from ref

Dear bro jazakallah, I'm got super fast zgemma h92h. I needed a lot of time to get familiar with this receiver. Zgemma can receive channels which amiko alien 2 could not receive with the same dish.However sometimes the picture quality is better on amiko and because of that I use both receivers. Plugins work exstremely good on zgemma: xstreamity, Jedi Makerr Xtream, Free server...both receivers are standing next to eachother huge amiko and little zgemma that has 16GB internal memory along with 4K resolution and android system and 4 enigma 2: Opena TV 7, open pli 8,1 pure2, openvix. I am sad that there is no open vision for this zgemma.

Congratulations on the new device, God willing, we hope to remain with us my brother on the old machine as well as you

This page Download your device the latest versions open vision v.11.2 constantly followed to get a new

https://images.openvision.dedyn.io/11.2/Vision/Zgemma/

99b75732e.jpg

This page has a private forum for your new device with a lot of subjects you will need

Zgemma H9 series

Enjoy & Good luck

Quote from ref

My bro Ahmed Gazye jazakallah. I learned the best from you about enigma2 and of course accompany you on this forum. Thanks for the link and I have one question.I found on the link an image for zgemma h9se but my new receiver is h9.2h se, is that the same? And second question is that my receiver has 16 GB of internal memory and has slot for SD card and they wrote on zgemma webpage that it is for recording but can it be used for additional images? Thenks a lot.

My dear brother, I am always at your service and I hope to be at your best always

No, the two devices are different the most difference between them

zgemma h9se Single Satellite 1x DVB-S2X Tuner

zgemma h9.2h se Satellite DVB-S2X Tuner + 1x Terrestrial / Cable DVB-C/T2

I think the download page of your device in open vision. is

https://images.openvision.dedy…/Vision/Zgemma/h9combose/

your receiver has 16GB EMMC FLASH / 1GB DDR3 Memory

16GB EMMC FLASH Divided into 4 partitions. to install 4 images in addition partitions.to Android ( Linux + Android Dual System)

and has slot for SD card Uses multiboot partitions after split it to many partitions

the difference between the two files The recovery_emmc & mmc or usb .zip is

The recovery_emmc. image when you pass it, it does a full reset of the device and it comes in slot 1 & wipes image in all partitions.

mmc or usb takes up one of the multiboot partitions

after passing the recovery image once then pass the images with the extension mmc or usb on the remaining slot

The device has an internal multiboot, you can split the sd card and install a large number of images

I hope to be added to you with this Small information

Please feel free to ask if you need

Enjoy & Good luck

Quote from mNet12

ok Mr Ahmed

I notes on NFR only i can max install only 10image How i can install more thats any idea

You can use this topic on the following link in the forum to do that

Thread

Modification for nfr4xboot 1.00 to install more than 10 images

Dear brothers and friends


This is the first topic I will do in this gigantic forum, which taught me a lot, especially older brother Ahmed Ghazi.


After working on great image NFR version 5.1 on the internal flash, which allows me to run more than one image on the external flash without installing problems, like the rest of versions 4.3, 5.3, 6.4 or 6.5 for my old device (Top Box 2 Toner 7162)
- note that version 5.1 does not have Wi-Fi I couldn't make the drivers to it
, but I prefer to use it…

angel_heart

Dec 26th 2020

Quote from first khan

I tried my level best to install the neutino image on external flash but each this error occurs.

Help me all experts

The pictures did not explain anything about the problem.

The pictures shown are for Plugin Image Manager, and you are here in a different plugin Nfr4X Multiboot Even if you succeed in installing it via plugin Nfr4X Multiboot the remote did not work

The solution is to install it via a Plugin Image Manager only

You did not read the topics well here and in my response to you in private, and you did not explain any version of neutino image Trying to install it, go back to the topics I mentioned to you, read them carefully, and follow the pictures

Thread

Explained how to install Enigma2 Image on the external flash by Plugin Image Manager in Devices Spark

Explained how to install Enigma2 Image on the external flash by Plugin Image Manager in Devices Spark




Firstly You Must be split the USB with the program CreateMini or others (To convert it to an external flash, Containing the 8 or more Partition to install 7 Copy or more in it )

You can split the USB 8GB to 8 Partition by program CreateMini into equal Partition as explained in the topic So that the Partition to install the Image is 1 GB (It is better that the size of the Partition is not less…

ahmed gazye

Jun 2nd 2019

or

Thread

INSTALLING ENIGMA2 USING SPARK PLUGIN IN AMIKO ALIEN/ALIEN 2

Discussion of article INSTALLING ENIGMA2 USING SPARK PLUGIN IN AMIKO ALIEN/ALIEN 2:
(Quote)

gorski

Apr 21st 2020

Thread

Solving the problem in Neutrino image after installing by plugin imagemanager

Do not look for the truth in people - but look for the truthful


Solving the problem of the appearance of an error message when tweaking the version Neutrino by the Duckba-E2 after the installation of the plugin imagemanager on the external flash








Solving the problem of the appearance of an error message when tweaking the version Neutrino by the Duckba-E2 after the installation of the plugin imagemanager on the external flash




Solving the problem of the appearance of an error message when tweaking…

ahmed gazye

Nov 18th 2018