it's about the DM920 and image is the merlin installed.
i tried the wget script from post 89 or from post 1. in post 117 is what it indicates. I reported it here.
it's about the DM920 and image is the merlin installed.
i tried the wget script from post 89 or from post 1. in post 117 is what it indicates. I reported it here.
Okey but if you use an iptv epg online service you can timeshift in the settings there instead.
The you do not need this script at all.
I have tested on my Dreambox 900 and Dreambox One DreamOS image and all works just fine if you follow the instructions from post nr1
But again cron want be setup proper so that has to be done manual.
So better to add the timeshift where you create your epg source
I installed the epg importer and the jedi maker. Where can you set the time? I've tried the wget command from page 1 and it doesn't work, it says I should report to ravstar, I did that
wget OK Trotzdem kommt ein fehlerhaftes
root@dreambox:~# wget -O /tmp/setup.sh "https://github.com/ravstar/Enigma2/raw/main/setup.sh" && cd /tmp/ && chmod 755 setup.sh && ./setup.sh
--2022-11-10 15:30:11-- https://github.com/ravstar/Enigma2/raw/main/setup.sh
Resolving github.com... 140.82.121.3 Connecting to github.com|140.82.121.3|:443... connected. HTTP request sent, awaiting response... 302 Found Location: https://raw.githubusercontent.com/ravstar/Enigma2/main/setup.sh [following]
--2022-11-10 15:30:11-- https://raw.githubusercontent.com/ravstar/Enigma2/main/setup.sh
Resolving raw.githubusercontent.com... 185.199.111.133, 185.199.110.133, 185.199.108.133, ... Connecting to raw.githubusercontent.com|185.199.111.133|:443... connected. HTTP request sent, awaiting response... 200 OK Length: 5179 (5.1K) [text/plain] Saving to: '/tmp/setup.sh' /tmp/setup.sh 100%[=================================================================================================================>] 5.06K --.-KB/s in 0s 2022-11-10 15:30:11 (20.3 MB/s) - '/tmp/setup.sh' saved [5179/5179] uninstalling previous version of this script rm: cannot remove '/etc/epgimport/new.EPG.sources.xml': No such file or directory rm: cannot remove '/etc/hdd/epg/iptvepg.xml.gz': No such file or directory crontab: can't open 'root': No such file or directory no cron found crontab: can't open 'root': No such file or directory no cron found crontab: can't open 'root': No such file or directory no cron found ./setup.sh: line 36: cd: /usr/script/: No such file or directory ./setup.sh: line 37: [: -eq: unary operator expected starting new installation This script will fix EPG offset issue for IPTV i.e. if your epg is ahead or behind and showing wrong program information. You can adjust the offset time between any range from 1 minute to up to 23 hours. One jedimaker playlist found: jxxxx.xyz.sources.xml, proceeding installation... Enter the time you would like to offset including +/-HHMM Example: your epg is half an hour ahead then put -0030 your epg is an hour ahead then put -0100 your epg is two hours ahead then put -0200 your epg is half an hour behind then put +0030 your epg is an hour behind then put +0100 your epg is two hours behind then put +0200, and so on.. Enter time: +0100 jmx.line.toponeservices.xyz.sources.xml +0100 /etc/epgimport/xxxx.xyz.xmltv2.xml IPTV_line.toponeservices.xyz /media/hdd/epg/IPTV_line.toponeservices.xyz.xml --2022-11-10 15:31:03-- https://github.com/ravstar/Enigma2/raw/main/xmltv.sh
Resolving github.com... 140.82.121.3 Connecting to github.com|140.82.121.3|:443... connected. HTTP request sent, awaiting response... 302 Found Location: https://raw.githubusercontent.com/ravstar/Enigma2/main/xmltv.sh [following]
--2022-11-10 15:31:03-- https://raw.githubusercontent.com/ravstar/Enigma2/main/xmltv.sh
Resolving raw.githubusercontent.com... 185.199.111.133, 185.199.110.133, 185.199.108.133, ... Connecting to raw.githubusercontent.com|185.199.111.133|:443... connected. HTTP request sent, awaiting response... 200 OK Length: 693 [text/plain] Saving to: '/usr/script/xmltv.sh' /usr/script/xmltv.sh 100%[=================================================================================================================>] 693 --.-KB/s in 0s 2022-11-10 15:31:04 (9.00 MB/s) - '/usr/script/xmltv.sh' saved [693/693] --2022-11-10 15:31:04-- https://github.com/ravstar/Enigma2/raw/main/uninstall1.sh
Resolving github.com... 140.82.121.3 Connecting to github.com|140.82.121.3|:443... connected. HTTP request sent, awaiting response... 302 Found Location: https://raw.githubusercontent.com/ravstar/Enigma2/main/uninstall1.sh [following]
--2022-11-10 15:31:04-- https://raw.githubusercontent.com/ravstar/Enigma2/main/uninstall1.sh
Resolving raw.githubusercontent.com... 185.199.111.133, 185.199.110.133, 185.199.108.133, ... Connecting to raw.githubusercontent.com|185.199.111.133|:443... connected. HTTP request sent, awaiting response... 200 OK Length: 538 [text/plain] Saving to: '/usr/script/uninstall1.sh' /usr/script/uninstall1.sh 100%[=================================================================================================================>] 538 --.-KB/s in 0s 2022-11-10 15:31:05 (7.40 MB/s) - '/usr/script/uninstall1.sh' saved [538/538] crontab: can't open 'root': No such file or directory Daily cron added to run script daily at 06:10am xml HHMM is ./setup.sh: line 134: [: -eq: unary operator expected ERROR: Script has been installed though it won't work until you follow one more step manually. Please make a note of following text My xml HHMM is: and I want to adjust it by: +0100 Please follow the additional step mentioned in original post or reach out to 'ravstar'
Display More
Please delete your provider domain from your crash log.
And some older images used to use usr/scripts folder instead of usr/script
In which case if you are missing usr/script
Just create a new directory called that
first thank you for the support :-)
Still does not work, unfortunately.
Same error message as above.
the folder /etc/script already exists
Display Morefirst thank you for the support :-)
Still does not work, unfortunately.
Same error message as above.
the folder /etc/script already exists
Wrong path it should be usr/script or scripts not etc / script
Hello KiddaC
I tried your script but without success.
I tried all the methods reading in this topic but it failed for me.
If you want, will you please help me to solve my problem?
My error:
BusyBox v1.31.0 (2022-09-10 16:42:46 UTC) multi-call binary.
Usage: head [OPTIONS] [FILE]...
Print first 10 lines of each FILE (or stdin) to stdout.
With more than one FILE, precede each with a filename header.
-n N[kbm] Print first N lines
N may be suffixed by k (x1024), b (x512), or m (x1024^2).
wget: server returned error: HTTP/1.1 401 Unauthorized
xml HHMM is
./setup.sh: line 134: [: -eq: unary operator expected
ERROR: Script has been installed though it won't work until you follow one more step manually. Please make a note of following text
My xml HHMM is: and I want to adjust it by: +0200
Please follow the additional step mentioned in original post or reach out to 'ravstar'
I tried your option in this solution
"
""My xml HHMM is: +/-four digits and I want to adjust it by: +/-four digits"
But i got this rule e bit different.
"My xml HHMM is: (no digits) and I want to adjust it by: +0200" (Four digits)
How do i change this option to solve my problem with the EPG Time?
And what should I do with this ? "wget: server returned error: HTTP/1.1 401 Unauthorized"
Kind regards,
Display MoreHello KiddaC
I tried your script but without success.
I tried all the methods reading in this topic but it failed for me.
If you want, will you please help me to solve my problem?
My error:
BusyBox v1.31.0 (2022-09-10 16:42:46 UTC) multi-call binary.
Usage: head [OPTIONS] [FILE]...
Print first 10 lines of each FILE (or stdin) to stdout.
With more than one FILE, precede each with a filename header.
-n N[kbm] Print first N lines
N may be suffixed by k (x1024), b (x512), or m (x1024^2).
wget: server returned error: HTTP/1.1 401 Unauthorized
xml HHMM is
./setup.sh: line 134: [: -eq: unary operator expected
ERROR: Script has been installed though it won't work until you follow one more step manually. Please make a note of following text
My xml HHMM is: and I want to adjust it by: +0200
Please follow the additional step mentioned in original post or reach out to 'ravstar'
I tried your option in this solution
"
""My xml HHMM is: +/-four digits and I want to adjust it by: +/-four digits"
But i got this rule e bit different.
"My xml HHMM is: (no digits) and I want to adjust it by: +0200" (Four digits)
How do i change this option to solve my problem with the EPG Time?
And what should I do with this ? "wget: server returned error: HTTP/1.1 401 Unauthorized"
Kind regards,
you are talking to wrong person it is not KiddaC but ravstar who made script
Owww Excuse me.......
OK Ravstar,
At this moment the problem is fixed.
How I dont know.
I did a image upgrade (OpenPli) without the auto backup function.
I installed manualy all the plugins and EPG works now with the right offset
Hi. Is it possible to shift EPG by hour or two for 1 single channel? (My soft/hard in signature. And I'm watching IPTV thru bouquets without JediMakerxtreme).
Thanks in advance.
Hi. Is it possible to shift EPG by hour or two for 1 single channel? (My soft/hard in signature. And I'm watching IPTV thru bouquets without JediMakerxtreme).
Thanks in advance.
So if not using Jedimaker how are your making IPTV bouquets.
you could use xstreamity if needed:
QuoteDisplay MoreEPG or INFO or TEXT: Now / Next EPG info toggle
EPG(long) or INFO(long) or TEXT(long): Full daily short EPG
REC or 5: Record live stream
TV or FAV or STOP or PVR: Add channel to favourites folder
MENU: Hide/Show Channels screen
7: EPG minus 1 hour
8: EPG reset time
9: EPG plus 1 hour
No, I'm using hls playlist, created by my provider for satellite receivers.
Hi,
unfortunately I get an error that I can't handle:
root@osnino:/tmp# wget -O /tmp/setup.sh "https://github.com/ravstar/Enigma2/raw/main/setup.sh" && cd /tmp/ && chmod 755 setup.sh && ./setup.sh
Connecting to github.com (140.82.121.3:443)
wget: note: TLS certificate validation not implemented
Connecting to raw.githubusercontent.com (185.199.110.133:443)
saving to '/tmp/setup.sh'
setup.sh 100% |*****************************************************************************************************************************| 5179 0:00:00 ETA
'/tmp/setup.sh' saved
uninstalling previous version of this script
rm: can't remove '/etc/epgimport/new.EPG.sources.xml': No such file or directory
rm: can't remove '/etc/hdd/epg/iptvepg.xml.gz': No such file or directory
no cron found
no cron found
Old cron removed
http://iptv.xxx
/media/hdd/epg/IPTV_iptv.iptv.xml
/etc/epgimport/jmx.iptv.iptv.sources.xml
Iptv url already exists in /etc/epgimport/jmx.iptv.iptv.sources.xml
starting new installation
This script will fix EPG offset issue for IPTV i.e. if your epg is ahead or behind and showing wrong program information.
You can adjust the offset time between any range from 1 minute to up to 23 hours.
One jedimaker playlist found: jmx.iptv.iptv.sources.xml, proceeding installation...
Enter the time you would like to offset including +/-HHMM
Example:
your epg is half an hour ahead then put -0030
your epg is an hour ahead then put -0100
your epg is two hours ahead then put -0200
your epg is half an hour behind then put +0030
your epg is an hour behind then put +0100
your epg is two hours behind then put +0200, and so on..
Enter time: -0200
jmx.iptv.iptv.sources.xml
-0200
http://iptv.xxx
IPTV_iptv.xxx
/media/hdd/epg/IPTV_iptv.iptv.xml
Connecting to github.com (140.82.121.3:443)
wget: note: TLS certificate validation not implemented
Connecting to raw.githubusercontent.com (185.199.110.133:443)
saving to '/usr/script/xmltv.sh'
xmltv.sh 100% |*****************************************************************************************************************************| 693 0:00:00 ETA
'/usr/script/xmltv.sh' saved
Connecting to github.com (140.82.121.3:443)
wget: note: TLS certificate validation not implemented
Connecting to raw.githubusercontent.com (185.199.110.133:443)
saving to '/usr/script/uninstall1.sh'
uninstall1.sh 100% |*****************************************************************************************************************************| 538 0:00:00 ETA
'/usr/script/uninstall1.sh' saved
Daily cron added to run script daily at 06:10am
head: invalid option -- '1'
BusyBox v1.31.0 (2023-05-29 00:26:38 UTC) multi-call binary.
Usage: head [OPTIONS] [FILE]...
Print first 10 lines of each FILE (or stdin) to stdout.
With more than one FILE, precede each with a filename header.
-n N[kbm] Print first N lines
N may be suffixed by k (x1024), b (x512), or m (x1024^2).
xml HHMM is
./setup.sh: line 134: [: -eq: unary operator expected
ERROR: Script has been installed though it won't work until you follow one more step manually. Please make a note of following text
My xml HHMM is: and I want to adjust it by: -0200
Please follow the additional step mentioned in original post or reach out to 'ravstar'
Display More
Any ideas what to do?
Not answering your question, but why are your files doubling up IPTV everywhere.
It might be confusing the hell out of everything.
jmx.iptv.iptv.sources.xml
/media/hdd/epg/IPTV_iptv.iptv.xml
Oh, that's just my bad try to anonymize my log
I thought this parts should not be relevant anyway.
Don’t have an account yet? Register yourself now and be a part of our community!