Can someone upload the mips binary file only please?
OSCam Surprise.532-r797
- srkist
- Thread is marked as Resolved.
-
-
version mips ( last revision )
config is easy only oscam.conf / oscam.user
-
A Orange 13e pl black cards viaccess 0500@032A00 works? Not works.........oscam.
-
version mips ( last revision )
config is easy only oscam.conf / oscam.user
Can I use it in my vu uno hd, with atv 6.4?
Dont need to install lib files?
-
Non install lib files .
-
version mips ( last revision )
config is easy only oscam.conf / oscam.user
Can I use it in my vu uno hd, with atv 6.4?
Dont need to install lib files?
yes, no libs, just execute it
-
Oscam EMU Mipsel arch for Tnt 19.2 E
by juli13
-
OK, with this new patched oscam , beside TNT , are powervu channels open too ?
Edision MIO 4k receiver
-
Oscam EMU Mipsel arch for Tnt 19.2 E
by juli13
Works very well.
The problem is: for have tnt, I lose biss, tandberg and powervu :(
-
Display More
Oscam EMU Mipsel arch for Tnt 19.2 E
by juli13
Works very well.
The problem is: for have tnt, I lose biss, tandberg and powervu :(
just run oscam-tntsat and oscam-emu (with powervu) separately, you will have 2 oscam process, don't forget to set pmt_mode to 6.
-
I Run Oscam-TNT & Ncam & Supcam at the same time
And everything works, thanks to the owners of the latest version of Oscam
-
I Run Oscam-TNT & Ncam & Supcam at the same time
And everything works, thanks to the owners of the latest version of Oscam
So you have a configuration problem, but you are able to run supcam, ncam, tnt, revcam..and evey softacm you want together!! just have a correct configuration for every softcam
-
I Run Oscam-TNT & Ncam & Supcam at the same time
And everything works, thanks to the owners of the latest version of Oscam
So you have a configuration problem, but you are able to run supcam, ncam, tnt, revcam..and evey softacm you want together!! just have a correct configuration for every softcam
i don't have any problem Bro everything works and the configuration is OK
-
A Orange 13e pl black cards viaccess 0500@032A00 works? Not works.........oscam.
you can install and test whether orange runs with keys
I think there are no polish paytv with keys running
-
Display MoreDisplay More
Oscam EMU Mipsel arch for Tnt 19.2 E
by juli13
Works very well.
The problem is: for have tnt, I lose biss, tandberg and powervu :(
just run oscam-tntsat and oscam-emu (with powervu) separately, you will have 2 oscam process, don't forget to set pmt_mode to 6.
I dont Know how i can have 2 oscam-emu at the same time.
Now in my main image only have Oscam_11.685-r798 (Powervu, biss, tand works)
Via openmultiboot i have a 2nd image with this TNT emu running, but I would like to have everything working in one image.
-
Display MoreDisplay MoreDisplay More
Oscam EMU Mipsel arch for Tnt 19.2 E
by juli13
Works very well.
The problem is: for have tnt, I lose biss, tandberg and powervu :(
just run oscam-tntsat and oscam-emu (with powervu) separately, you will have 2 oscam process, don't forget to set pmt_mode to 6.
I dont Know how i can have 2 oscam-emu at the same time.
Now in my main image only have Oscam_11.685-r798 (Powervu, biss, tand works)
Via openmultiboot i have a 2nd image with this TNT emu running, but I would like to have everything working in one image.
*** On OpenPLI mips ***
Go to
/etc/init.d
Creat : softcam.SURPRISE (chmod 755) with the content below
*****************************************************
#!/bin/sh
case "$1" in
start)
ulimit -s 1024
/usr/bin/oscam-surprise --config-dir /etc/tuxbox/config/Surprise--daemon --pidfile /tmp/surprise.pid --restart 2 --utf8
/usr/bin/oscam --config-dir /etc/tuxbox/config/Oscam --daemon --pidfile /tmp/oscam.pid --restart 2 --utf8
;;
stop)
kill `cat /tmp/surprise.pid` 2> /dev/null
kill `cat /tmp/oscam.pid` 2> /dev/null
;;
restart|reload)
$0 stop
sleep 1
$0 start
;;
version)
echo "SURPRISE"
;;
info)
echo "SURPRISE"
;;
*)
echo "Usage: $0 start|stop|restart"
exit 1
;;
esac
exit 0
*****************************************************
Yellow : the direction of your bin files (chmod 755)
Red : the direction of your config files
-
Display MoreDisplay MoreDisplay MoreDisplay More
Oscam EMU Mipsel arch for Tnt 19.2 E
by juli13
Works very well.
The problem is: for have tnt, I lose biss, tandberg and powervu :(
just run oscam-tntsat and oscam-emu (with powervu) separately, you will have 2 oscam process, don't forget to set pmt_mode to 6.
I dont Know how i can have 2 oscam-emu at the same time.
Now in my main image only have Oscam_11.685-r798 (Powervu, biss, tand works)
Via openmultiboot i have a 2nd image with this TNT emu running, but I would like to have everything working in one image.
*** On OpenPLI mips ***
Go to
/etc/init.d
Creat : softcam.SURPRISE (chmod 775) with the content below
*****************************************************
#!/bin/sh
case "$1" in
start)
ulimit -s 1024
/usr/bin/oscam-surprise --config-dir /etc/tuxbox/config/Surprise--daemon --pidfile /tmp/surprise.pid --restart 2 --utf8
/usr/bin/oscam --config-dir /etc/tuxbox/config/Oscam --daemon --pidfile /tmp/oscam.pid --restart 2 --utf8
;;
stop)
kill `cat /tmp/surprise.pid` 2> /dev/null
kill `cat /tmp/oscam.pid` 2> /dev/null
;;
restart|reload)
$0 stop
sleep 1
$0 start
;;
version)
echo "SURPRISE"
;;
info)
echo "SURPRISE"
;;
*)
echo "Usage: $0 start|stop|restart"
exit 1
;;
esac
exit 0
*****************************************************
Yellow : the direction of your bin files (chmod 775)
Red : the direction of your config files
Thank you, for your help!!
Well, i tried your solution, but the TNT channels keep black.
Please verify my attachments
-
Try this command:
/usr/bin/oscam-surprise --config-dir /etc/tuxbox/config/Surprise --daemon --pidfile /tmp/surprise.pid --restart 2 --utf8
if screen stay black, just run /usr/bin/oscam-surprise to display messages.
-
Hi Guys. OSCam_surprise.532-r797 where can i transfer this file and is it working for all images? i tried to ftp to usr/bin on opentav 6.4 (duo2 hd) but it does not show with the other emus. thanks
-
Hi Guys. OSCam_surprise.532-r797 where can i transfer this file and is it working for all images? i tried to ftp to usr/bin on opentav 6.4 (duo2 hd) but it does not show with the other emus. thanks
Hello,
What is your box architecture ? mips or arm 4k? transfer the bin to usr/bin is not enough to have the choise to execute this emu with the interface.
1st thing to do is to run in telnet /usr/bin/<name_of_your_binary> and see what's happpen
if it's ok, just install oscam-emu (use the last version) and replace the bin by yours.
Your resource for OSCam-EMU softcam
Participate now!
Don’t have an account yet? Register yourself now and be a part of our community!
