Firstly are you sure its not a family member winding you up via a mobile phone app or openwebif.
a couple of things you can do.
Make sure you have changed your password in
setup > system > network > password setup
and dont use common words. Use random letters and numbers.
and
plugins > openwebifconfiguration
Enable http Authentication ... yes
that will mean the user would have to type a username and password to access via a browser.
Username: root. Password: whatever you changed it to
clean flash
I have a problem here.
Is there any ports open in the router allowing access to the sf8008? If there is you need to close them immediately.
I deleted all ports. In fact, there were two doors open, but I don't remember opening them. heemmm
Tanks
Tanks KiddaC.
Done
Tanks .atari.
I will continue the tests. If it doesn't work, clean flash on box.
Many thanks to everyone for the help.
Friends, I'll give it crazy.
I did everything you said and nothing.
I am finishing installing an OpenSPA recovery image and while I am setting up, the software is jumping from line to line, for a few seconds and when I move again with RCU, again change the lines.
Will it be a hardware problem?
The issue is most likely on your router. Check for updates, change Admin password.
If you connect by Telnet to your box and issue following command, it will tell you who is connected
netstat
Most recent images have a menu for connected clients.
Abu, thanks for the help.
Reset the router and new password
I'm testing it and so far everything is fine.
Display MoreNow that we know you only share to yourself within your own network it can safely be said its not an oscam problem and it cannot be used to block access.
I have moved your post and responses away from the "Failban oscam" thread back to here.
Open OpenWebif configuration:
HTTP port - don`t use the default port 80. Change this immediately and close this port in the router.
Enable Authentication for streaming - default is no, change it to yes
Disable remote access for user root - default is no, change it to yes
Streaming port - don`t use the default port 8001. Change this immediately and close this port in the router.
Telnet / ssh to your box, paste in this command then press enter:
adduser admin -h /dev/null -H -s /bin/false -G root
You will be prompted for a new password. Enter your password x2.
Restart GUI.. Now try to login with the user = admin and your new password. You can change admin on the command to any username you want.
The idea behind this is to disable root access which we did in OpenWebif configuration, then give access to only the users you create.
Once the new ports have been configured and opened in the router, login with the new user & pass.
Thank you so much for this.
I've recently noticed someone streaming remotely from my box.
Thanks to you, I've disabled root and created a new user.
Many thanks!
master G following on from your post on how to create a new user.
How do I give this new user access rights to SMB shares on my network please?
If I log into my VU UNO 4K via Windows, I can't see the hard disk or any other folders.
If I log in with root I can see the root folder and the hdd folder in Windows.
Thank you!
how i can check if someone stream from my box?
Can I make several users on enigma2 for streaming?
E.g. user1 and user2 with different passwords?
Then when they use the VU Uno 4K Se remotely I will log in on user1 and someone else to whom I give will log in on user2 - will this work?
Create as many new usernames as you want, but they will all have full control over the FTP/SSH, OpenWebif.
Is it possible to have control of enigma2 without knowing the password?
No.
Can anyone break such a password or view it via live stream?
I think that`s very secure, and nobody can decode your password from a stream.
How do I block an external IP from accessing OpenWebif?
I can see the external client's IP in box info on OpenWebIF.
I have set oscam to only allow 127.0.0.1/192.162.x.x IPs but I want to block IPs from the actual box and OpenWebIF too.
I have set a random root password, and I have created a new admin user which has a unique password too.
OpenWebIF is also using a different http port to the default one, and authentication is enabled.
Still, someone is managing to get into my box and stream channels...
How do I block an external IP from accessing OpenWebif?
This can only be done in the router.
Resetting the router is probably a good idea, then change all the ports that were used before.
Best would be Flash you BOX with clean Image use some Oscam from Trusted Source and make all New
Change Usernames and Passwords
Disable not needed Protocols in Enigma
and you will not have more Problems
how i see you can make whatever you want if you have Modified Oscam on your Box or Image they will always find a way inside your Box
Update your Router and Change Passwords too
Look if your router have any Open ports with Portscanner
Look on Exploitdbs Sites for Your Model Router Exploit if there is any Known
How do I block an external IP from accessing OpenWebif?
This can only be done in the router.
Resetting the router is probably a good idea, then change all the ports that were used before.
Thank you. Did you see my older post, about giving a newly created user access to the SMB shares?
Display MoreBest would be Flash you BOX with clean Image use some Oscam from Trusted Source and make all New
Change Usernames and Passwords
Disable not needed Protocols in Enigma
and you will not have more Problems
how i see you can make whatever you want if you have Modified Oscam on your Box or Image they will always find a way inside your Box
Update your Router and Change Passwords too
Look if your router have any Open ports with Portscanner
Look on Exploitdbs Sites for Your Model Router Exploit if there is any Known
Thank you. I think that will be the last resort for me. Just a shame I might lose the ability to stream from my phone when I'm away from home :(
As indicated above and before, it is happening at the router. Flashing the box without solving the issue (the entry point at router) is a futile process. Most routers will always assign same Ip address to box and the port forwarding will continue.
Display MoreHow do I block an external IP from accessing OpenWebif?
This can only be done in the router.
Resetting the router is probably a good idea, then change all the ports that were used before.
Thank you. Did you see my older post, about giving a newly created user access to the SMB shares?
Display MoreBest would be Flash you BOX with clean Image use some Oscam from Trusted Source and make all New
Change Usernames and Passwords
Disable not needed Protocols in Enigma
and you will not have more Problems
how i see you can make whatever you want if you have Modified Oscam on your Box or Image they will always find a way inside your Box
Update your Router and Change Passwords too
Look if your router have any Open ports with Portscanner
Look on Exploitdbs Sites for Your Model Router Exploit if there is any Known
Thank you. I think that will be the last resort for me. Just a shame I might lose the ability to stream from my phone when I'm away from home :(
Change your ip ? Or set up your own vpn
Friends, I'll give it crazy.
I did everything you said and nothing.
I am finishing installing an OpenSPA recovery image and while I am setting up, the software is jumping from line to line, for a few seconds and when I move again with RCU, again change the lines.
Will it be a hardware problem?
Its a driver problem. Rename the file hisi_keys.ko to hisi_keys.ko.bak. You find the file in /lib/modules/4.4.35/extra
