That's how it is with me
Снимок экрана 2023-07-06 в 18.21.41.png
Judging by your log, you are trying to download the EPG from a folder on USB, and not from a link from the site
You have an error in the provider's card in the "EPG source" field. Indicate there the link that I wrote to you above!
Снимок экрана 2023-07-06 в 18.23.57.pngСнимок экрана 2023-07-06 в 18.24.27.png
Thank you, now it works, but strange because I didn't change anything and it was always good anyway
Thank you, now it works, but strange because I didn't change anything
Miracles don't happen! 
<epgurl> in config.xml, will specifying the number of days like days=7 will do any difference? because the EPG shows for 2 days maximum after shutting down the dm900 or dmone, i have these receivers, they dissapear and i have to redownload again and it takes almost 3 hours because of the size of the plyalist witch is understandable, but why the EPG disapear i try to load the epg.db but it just doesn't show, in the log everything is working fine,
using DreamOS with GP4.2
in config.xml, will specifying the number of days like days=7
The "range" of days for which events are imported from the EPG is determined by two "things"
1) EPG parameter settings in the image being used ... In DreamOS, as far as I remember, you can set a maximum of 28 days in advance ... This setting can be considered as "cutting off" data on events if they are further than the specified number of days
Снимок экрана 2023-07-21 в 20.59.31.png
2) The presence of events for N-days ahead in the used XMLTV (EPG) ... and in this case, if the number of days "forward" in the used XMLTV, for example, is two days, then whatever you set in p1) EPG will be for two days
Thus, if in the XMLTV (EPG) you use, in fact, there is only data on channels for 2-3 days in advance, then no matter what settings you set, data for more than 2-3 days in advance will not appear =)
after shutting down the dm900 or dmone, i have these receivers, they dissapear and i have to redownload again and it takes almost 3 hours
1) If you do a full shutdown or reboot, then that is a feature of DreamOS. Pay attention to the time on the LCD after the reboot! Wait for it to sync with the current correct time and then do a RestartGUI... then the EPG will appear ...
2) Such a long time to import EPG events could be due to two things.. either a very huge playlist (50,000+ lines) and XMLTV being used is very huge... or you are placing the epg.db file on a USB stick with a very slow read/write speed ... Personally, I use a small (128 GB) but very fast SSD to store epg.db and images in barryalien =)
I also set in the plugin settings to update bouquets and import EPG upon completion of creating bouquets - on schedule ... every night at 3 o'clock ... I just leave the DM900UHD in standby and all "imports" occur at night
<epgurl> in config.xml,
Whoops! If you specify a link to XMLTV (EPG), this translates the plugin algorithm for "binding" EPG events by the name of the channels in the playlist ... while tvg-id tags are ignored ... Python is not the fastest language to implement the Levinstein-Dahmerau algorithm. ... and this also significantly slows down the process of importing events ...
Does your playlist have tvg-id tags? epg-url? Could you send me the first 5-10 lines of your playlist in private correspondence? If the tags I mentioned are in your playlist, then the EPG import process can be significantly speeded up just by not specifying <epgurl> in config.xml,
Thanks for the brief explanation, epg.db and images are stored in compact flash.
Regarding the tvg-id, the lines don't have, unfortunately.
Regarding the tvg-id, the lines don't have, unfortunately.
In this case, I fully admit that on very large playlists, importing EPG events will take the time you described ... Alas, a library - https://github.com/maxbachmann/python-Levenshtein written in C is not available on Enigma2. Moreover, it is only available for Python3+ ... And I rewrote it in Python as fast as possible
HI, pepsik. I wanna report an error processing epg.
I attach log and xml downloaded ...
File is http://tropical.jungle-team.online/epg/koala7_2.xml.gz
Error log says [24.07 20:53:17] [e2m3u2b] ['surfacenow XMLTV'] channels table process failed: not well-formed (invalid token): line 180, column 69
I think is about an icon tag in line 180 of the epg file....
Judging by the log, the error is most likely not in the XMLTV file... Obviously, something is related to the text encoding in one of the playlist entries that you are using. Can you send me the file /E2m3u2bouquet/epgimport/e2m3u2b_surfacenow.channels.xml.gz? This file is a table of correspondence between the serviceref and channel_id of the XMLTV used ... it is there in line 180 and column 69 that the answer lies
Judging by the log, the error is most likely not in the XMLTV file... Obviously, something is related to the text encoding in one of the playlist entries that you are using. Can you send me the file /E2m3u2bouquet/epgimport/e2m3u2b_surfacenow.channels.xml.gz? This file is a table of correspondence between the serviceref and channel_id of the XMLTV used ... it is there in line 180 and column 69 that the answer lies
This line is very doubtful... the fact is that somewhere in the playlist you are using, the channel named "----MUSICA----" has a "tvg-id" tag value of "\N" ... this is obviously stupid and is not allowed
<channel id="\N">1:0:1:533a:5530:303f:1010101:0:0:0</channel><!-- ----MUSICA---- -->Find this channel in the playlist you use, and if it's not difficult, send me these two lines of the channel "----MUSICA----" in personal correspondence ... I'll think about how to "beat" this kind of nonsense in playlists ...
I have sended you the files in a conversation. I have tried to modify the override file but this not avoid the creattion of the e2m3u2b_surfacenow.channels.xml with the "\n" character that causes the fault. Please, make magic ...
Please, make magic ...
"Magic" in PM for test ...
I put the m3u files to media/ba/E2m3u3bouquet, but can not create bouquets.
Where is the mistake?
I put the m3u files to media/ba/E2m3u3bouquet, but can not create bouquets.
Where is the mistake?
You need to create a "card" of the provider in the menu "Providers" where you specify its name and playlist file, as well as other desired parameters
Снимок экрана 2023-07-31 в 06.26.17.pngСнимок экрана 2023-07-31 в 06.26.37.png
Снимок экрана 2023-07-31 в 06.26.50.pngСнимок экрана 2023-07-31 в 06.28.29.png
Снимок экрана 2023-07-31 в 06.29.46.png
Playlist files can be located in any folder, not necessarily in media/ba/E2m3u3bouquet .... Also, instead of a file, a url-link to a playlist can be set
Hallo,
leider bekomme ich seit neuem auch keine Bouquets mehr angezeigt.
Es wird immer alles in einem Ordner erstellt.
Auf meiner DM900 habe ich auch noch das Plugin Xstreamity von hier. Da werden Bouquets erstellt.
Ich probiere schon mehrere Tage leider ohne Erfolg.
Hat jemand einen Rat.
leider bekomme ich seit neuem auch keine Bouquets mehr angezeigt.
Es wird immer alles in einem Ordner erstellt.
Bouquets will be "split" into groups if your playlist has "group-title" tags with non-empty values in the EXTINF directive
For example
#EXTINF:-1 tvg-id="FOX HD" tvg-logo="https://www.example.com/canal/FOXGE.png" group-title="06 - M+ CINE Y SERIES",FOX HD If your playlist does not contain tag data, splitting is not possible due to the lack of data on the basis of which this can be done
This is what the bouquets look like divided into groups
Don’t have an account yet? Register yourself now and be a part of our community!
