Icam only runs at startup Rec runs automatically. Can this be put off?
Oscam Icam Sky DE and UK
-
- ICAM OSCam
- kashmir
- Closed
- Thread is marked as Resolved.
There are 1,135 replies in this Thread which was already clicked 435,661 times. The last Post () by abu baniaz.
-
-
where are icam channels list ?
please in attachment
-
I have a simple question.
Why some channels worked yesterday and today they not open?
-
I think most of us are relying on cache to clear channels. No cache = no clear.
-
I have a simple question.
Why some channels worked yesterday and today they not open?
ask your line provider
-
My line provider is the same. Never had problems on sky till June when they change to ICAM, at that time all channels cleared very well but not now.
Some open ok, and some dont even open, for example sky cinema action HD, sky F1 hd, are ok and no freeze, but sky atantic and sky one does not even open, that does not make any sense to me.
I can watch entire movies with no freezing, but some does not open, i´m confused...
Tell me what is the difference to decode sky one and to decode sky F1 because all of them belong to the same company, Sky.
My ecm on sky are ok lower than 250ms its more than enough to watch without any freeze also
Thanks
-
tell which image / receiver you use ?
which oscam version patched ??
your .conf .server
-
tested vu solo 2 full working
-
tell which image / receiver you use ?
which oscam version patched ??
your .conf .server
Im using it on openatv 6.4 and 7.1 on Gigablue UE 4K
Oscam-icam-arm 11711
.conf
# oscam.conf generated automatically by Streamboard OSCAM 1.20_svn SVN r11711-798
[global]
logfile = /tmp/log/oscam.log
nice = -20
maxlogsize = 1000
preferlocalcards = 1
lb_save = 100
lb_nbest_readers = 10
lb_max_readers = 10
ecmfmt = P: c:s:0 #CW=w:h HOP:j
disablecrccws_only_for = 0500:030B00;1819:00006D;098D:000000;098C:000000;09C4:000000;092B:000000;1884:000000;1841:000000;1813:000068;0B01:000000
[radegast]
port = 9090
allowed = 127.0.0.1,192.168.0.0-192.168.255.255
user = icam
[streamrelay]
stream_ecm_delay = 0
stream_relay_ctab = 098D
[dvbapi]
enabled = 1
pmt_mode = 0
delayer = 60
user = DVBApi
read_sdt = 2
write_sdt_prov = 1
boxtype = dreambox
[webif]
httpport = 8080
httpcss = /usr/keys/OscamStyleTpl/kitte888_24.css
httptpl = /usr/keys/OscamStyleTpl
httppiconpath = /usr/keys/OscamStyle/picons
httphelplang = de
http_prepend_embedded_css = 1
httprefresh = 2
httppollrefresh = 7
httpshowpicons = 1
httppiconsize = 40
httpshowuserinfo = 1
httpshowreaderinfo = 1
httpallowed = 0.0.0.0-255.255.255.255,192.168.178.0-192.168.178.255
aulow = 120
hideclient_to = 10
http_status_log = 1
.Server
# oscam.server generated automatically by Streamboard OSCAM 1.20_svn SVN r11711-798 --- emu muss laufen ----
# Read more: https://svn.streamboard.tv/osc…/doc/txt/oscam.server.txt
[reader]
label = Icam
protocol = cccam
device =
user =
password =
inactivitytimeout = 30
group = 1
disablecrccws = 1
cccversion = 2.3.2
ccckeepalive = 1
audisabled = 1
[reader]
label = Icam
protocol = cccam
device =
user =
password =
inactivitytimeout = 30
group = 1
disablecrccws = 1
cccversion = 2.3.2
ccckeepalive = 1
audisabled = 1
[reader]
label = emulator
protocol = emu
device = emulator
disablecrccws_only_for = 0E00:000000
caid = 0500,0604,0E00,1010,1801,2600,2602,2610
detect = cd
ident = 0500:000000,007400,007800,021110,023800;0604:000000;0E00:000000;1010:000000;1801:000000,001101,002111,007301;2600:000000;2602:000000;2610:000000
group = 1
emmcache = 2,1,2,1
emu_auproviders = 0604:010200;0E00:000000;1010:000000;2610:000000
-
replace you oscam .bin with new one
stop cam
ftp
usr/bin
name oscam
replace with same name
check rights 755
start cam
-
replace you oscam .bin with new one
stop cam
ftp
usr/bin
name oscam
replace with same name
check rights 755
start cam
It doesnt work with your bin, all black screen.
I revert back to my old oscamicam bin and I can watch some channels
Thanks for your time
-
what is not work, generally oscam ?
-
what is not work, generally oscam ?
sky.de only
-
Is there a binary for DM920 without the Rec on the TV and the led flashes blue?
-
what is not work, generally oscam ?
sky.de only
Ask you server ….. It is icam patched ?
-
what is not work, generally oscam ?
sky.de only
Ask you server ….. It is icam patched ?
Yes its patched, I can watch some of the sky channels on the list, but with your bin 11714 file I cannot watch any, so I reverted to my old bin 11711 file to watch sky channels.
-
Yes its patched, I can watch some of the sky channels
than you watch cache.....
its not my compile .bin i have only put in Attachement but the .bin work
my compile .bin only in filebase for aarch64
-
the new icam version
old radegast
integrate ECM in HTTP streams on YES
Decrypt HTTP Streams NO
Decrypt received HTTP streams NO
Load unmounted bouquets YES
with the new version you have to reset it again, like this , dvbapi version
Integrate ECM in HTTP streams to NO
Decrypt HTTP streams YES
Decrypt received HTTP streams NO
Load unmounted bouquets YES
-
Need to reconfigure oscam.user by remove stream relay account
Code[account] user = dvbapiau pwd = dvbapiau keepalive = 1 monlevel = 4 au = 1 group = 1,2,3,4,5,6,7,8,9,10,64
& oscam.conf
Code
Display More#### "*******************************************" #### "* ..:: A U T H O R ::.. *" #### "* << LINUXSAT25 >> *" #### "*******************************************" [global] logfile = /tmp/oscam.log clienttimeout = 12000 fallbacktimeout = 3000 bindwait = 60 netprio = 1 nice = -1 waitforcards = 0 maxlogsize = 1024 waitforcards = 0 waitforcards_extra_delay = 200 preferlocalcards = 0 lb_mode = 2 readerrestartseconds = 1 dropdups = 1 lb_save = 100 lb_nbest_readers = 4 #[ To request import ecm from (Number) of readers ] lb_nfb_readers = 4 lb_min_ecmcount = 3 lb_reopen_seconds = 120 lb_reopen_invalid = 0 lb_force_reopen_always = 1 lb_retrylimit = 500 lb_stat_cleanup = 24 lb_max_readers = 4 ecmfmt = P: c:0p:s:d:i #ECM_L:l #CW=w HOP:j disablecrccws = 1 disablecrccws_only_for = 0500:030B00,051A00,051A10,051A40,041200;1819:00006D;098D:000000;092B:000000;1884:000000;1803:000000;0B01:000000;1861:000000;1810:000000;1813:000000;1841:000000;1813:000068;0B01:000000;183E:000000;183d:000000;4AEE:000000;1814:005211;1802:000000;1880:000000;0B02:000000 cccam_cfg_enabled = 1 cccam_cfg_save = 1 #cccam_cfg_path = /etc cccam_cfg_repetitions_forced = 1 cccam_cfg_reconnect_delay = 90 cccam_cfg_reconnect_attempts = 10 [cs378x] port = 13001 suppresscmd08 = 1 [newcamd] port = 12121@0000 key = 0102030405060708091011121314 mgclient = 1 [streamrelay] stream_ecm_delay = 5 stream_relay_ctab = 098D stream_relay_enabled = 1 stream_emm_enabled = 5 [cccam] port = 14023 nodeid = 24D5EF28108C14E0 version = 2.3.0 reshare = 0 #reshare_mode = 0 #stealth = 1 [dvbapi] enabled = 1 au = 1 pmt_mode = 0 #[ Use 6 the Best value for (opensource) images only ] request_mode = 1 delayer = 60 ecminfo_type = 4 user = linuxsat25 read_sdt = 1 write_sdt_prov = 1 extended_cw_api = 1 #[ (1) = OE2.2/2.5 AND (2) = OE2.0 ] boxtype = dreambox #[ For enigma2 use (dreambox) And spark and neutrino use (duckbox) ] [webif] httpport = 8888 httpuser = root httprefresh = 30 httppollrefresh = 30 httphidetype = sh httppiconsize = 30 httpshowpicons = 1 httpshowmeminfo = 1 httpshowuserinfo = 1 httpshowcacheexinfo = 1 httpshowecminfo = 1 httpshowloadinfo = 1 httpallowed = 172.16.0.0-172.31.255.255,192.168.0.0-192.168.255.255,127.0.0.1 httposcamlabel = BY-DreamSatPanel_Oscam- http_status_log = 1
setting will be like that on OBH
OPENWEBIF
CHANNELEL WORK PERFCTLY AND SMOOTHLY
-
someone to help me with openatv 6.4 or i need to change image
OSCam Support Forum
Configs, discussion, downloads and guides for OSCam Softcam.
Participate now!
Don’t have an account yet? Register yourself now and be a part of our community!