Hello !
I check as much I could info in this forum and google as well - but I did not find an answer to the problem...
Motor Technomate 2300 dish 1.1m primesat aluminium
Center sat I started 0.8w 12418 V got signal good when changing elevation can get strong signal 85-90%
- with elevation as from book motor 37 (Lat 53.4) dish bracket 22.4 nothing - changing bracket up to 25 signal goes up nearly 90%
ok leave it on it`s best moving to 13e and 16e - I had to move angle down 20 about 23 then I have signal acceptable for 16e - 13e and 1w
but no signal on 39e and 42e !
so when changing elevation down to 21 I got good signal from east 39 and 42 sat 70-80% but nothing on 1w now
so I tried 3 days one way - other way but still stuck if I have east sat then no picture on west and the way around...
Any advice how to solve ?
which elevation is I have to adjust - motor or dish ? preferable ?
what is best way- method to correct problem like this ?
------------------------------------------------------------------------------
At this moment I have Thor 5 strong transponder signal 72-74% but normaly nearly 88-90 and 16e weakest 44%-66% normaly can get up to 80% (but I have picture)
28e should be more than 100 but i have only 50%-60%
I see smth is wrong and need to be adjusted but after 3 days fail I really need advice - what I am missing ?
Thx for your time !