rm: can't remove '/newroot': Device or resource busy
openAtv 7.4 devel Images
- Lippei
- Thread is marked as Resolved.
-
-
rm: can't remove '/newroot': Device or resource busy
try
init 4 to stop enigma2
-
Also why is it not reading usb when trying to flash from boot did you format usb as fat32 first
you can also reboot via putty
init 6 – full reboot
or
killall -9 enigma2 – If your box freezes for some reasons, this will restart Enigma2 for you
-
my box stucks when the GUI is starting (at 62%) cyclying from 50% and 62%
-
It is very strange that I 'm not more able to boot from USB with a fresh image. Can you suggest a way to modify the boot sequence (USB as first)?
-
first of all I'd like to thank you so much for the support messages, even though actually those messages not yet resolved the issue.
-
It is very strange that I 'm not more able to boot from USB with a fresh image. Can you suggest a way to modify the boot sequence (USB as first)?
Sorry i do not have your reciever but there must be proper way to flash it also if trying to flash from usb remove any other usb devices connected only one for flashing
-
exactely this is my trouble. The usb is the only one connected :(
-
exactely this is my trouble. The usb is the only one connected :(
try another usb the smaller the better and is there not a special sequence for flashing your reciever perhaps reset button when powering on
-
-
maybe it is absolutely impossible to flash a new LINUX CO image, BY TELNET on my box :(
-
.Take a picture of your receiver and post a picture so we can see what it's like and help you figure out how to install it.
-
a picture of TV or the terminal? The TV is freezed to GUI boot screen (62%). The terminal is correctly attending commands (SSH running)
-
a picture of TV or the terminal? The TV is freezed to GUI boot screen (62%). The terminal is correctly attending commands (SSH running)
if you want to try again other method but I think you need usb mounted and initialised.
Flash ViX by command line (by Grog68). This will not create a settings backup.
Codewget --no-check-certificate -O install_vix.sh https://www.dropbox.com/s/hc2cdr116lvx3dj/install_vix.sh?dl=1 && bash install_vix.sh
Flash OpenATV by command line (by Grog68). This will not create a settings backup. -
Usb is mounted. I don't care about settings
where is the image?
-
Usb is mounted. I don't care about settings
where is the image?
what do you mean the script will download the image for your device
-
do you mean QVIART LUNIX CO ?
Qviart is not present in the selection menu.
How can I do it?
-
do you mean QVIART LUNIX CO ?
Qviart is not present in the selection menu.
How can I do it?
I don't know I just tried and flashed my partition 3
-
thanks for your effort :(
Changing the USB flash with another one with 1 GB (today very rare) and FAT32 I has been able to flash the box by USB.
I really want to than you all of You for the support
-
thanks for your effort :(
Changing the USB flash with another one with 1 GB (today very rare) and FAT32 I has been able to flash the box by USB.
I really want to than you all of You for the support
Yes thats great news you got it working I did mention try other smaller usb flash drive.
OpenATV Team Images Support Forum ~ based on OE-Alliance
OpenATV Supported Models ~ Airdigital, Amiko, Anadol, Atemio, Atto, AX Technology, Axas, Beyonwiz, Dinobot, Dreambox, Edision, EVO, Ferguson, Formuler, Galaxy Innovations, Gigablue, Golden Interstar, HDBox, Hitube, James Donkey, IQON, Izibox, Jepssen, Maxdigital, Medialink, MaXytec, MediaArt, Megaset, Miraclebox, MK-Digital, Mut@nt, Novaler, Octagon, Odin, Optibox, Protek, PULSe, Qviart, Red-Eagle, Relook, Roxxs, SAB, Sezam, Sogno, Space, Spycat, Technomate, Telestar, Tiviar, T-Rex, Uclan, Venton Unibox, Vimastec, VisionNet, VU+, VUplus, World Vision, Vizyon, WWio, Xsarius, and Xtrend.
Participate now!
Don’t have an account yet? Register yourself now and be a part of our community!