183D/183E EMM Activation via the http/https server with OSCam

I know very well I used the working one ... because I tested by inserting an old emm ... it immediately activated the system for me only that with the emm change directly from tvsat it didn't work ...

samur,

I own oscam-1.20_svn-r11724-798
Compiler: arm_cak7-icam_(samur)

[readers]
label = Tivusat_183E
protocol = internal
device = /dev/sci0
autospeed = 0
caid = 183E
rsakey = A92DA72FEEACF2947B003ED652153B189E4043B0138C368BDF6B9ED77DDAD6C0761A2198AEB3FC97A19C9D01CA769B3FFFE4F6E70FA4E0696A8980E18D8C58E11D81 7121346E3E66457FDD84CFA72589B25B538EFC304361B54845F39E9EFA52D805E5FD86B595B366C35716ABC91FA3DC159C9F4D8164B5
emm_url = https://rentry.co/ognzc/raw
detect = cd
nagra_read = 1
mhz = 540
cardmhz = 2700
ident = 183E:000000.005411
groups = 1
emmcache = 1,1,2,0
blockemm-unknown = 1
auprovid = 005411

get no EMM, except manual

so I compiled and obviously inserted the link with the new emm

[reader]

label = Tivusat_183E

protocol = internal

device = /dev/sci0

autospeed = 0

caid = 183E

rsakey = A92DA72FEEACF2947B003ED652153B189E4043B0138C368BDF6B9ED77DDAD6C0761A2198AEB3FC97A19C9D01CA769B3FFFE4F6E70FA4E0696A8980E18D8C58E11D817121346E3E66457FDD84CFA72589B25B538EFC304361B54845F39E9EFA52D805E5FD86B595B366C35716ABC91FA3DC159C9F4D8164B5

emm_url = https://pastebin.com/raw/XvRFLquM

emm_reload_minute = 10

detect = cd

mhz = 368

cardmhz = 368

nagra_read = 1

ident = 183E:000000,005411

group = 1

emmcache = 1,1,2,0

blockemm-unknown = 1

auprovid = 005411

Quote from @dragon@

so I compiled and obviously inserted the link with the new emm

[reader]

label = Tivusat_183E

protocol = internal

device = /dev/sci0

autospeed = 0

caid = 183E

rsakey = A92DA72FEEACF2947B003ED652153B189E4043B0138C368BDF6B9ED77DDAD6C0761A2198AEB3FC97A19C9D01CA769B3FFFE4F6E70FA4E0696A8980E18D8C58E11D817121346E3E66457FDD84CFA72589B25B538EFC304361B54845F39E9EFA52D805E5FD86B595B366C35716ABC91FA3DC159C9F4D8164B5

emm_url = https://pastebin.com/raw/XvRFLquM

emm_reload_minute = 10

detect = cd

mhz = 368

cardmhz = 368

nagra_read = 1

ident = 183E:000000,005411

group = 1

emmcache = 1,1,2,0

blockemm-unknown = 1

auprovid = 005411

Display More

with this setting 183e is not bright, of course for me

emm_reload_minute = 15

ecmwhitelist = 91

ecmheaderwhitelist = 80308ED387,81308ED387

detect = cd

nagra_read = 2

group = 1

emmcache = 1,2,2,0

auprovid = 005411

ok.....

I'm writing this for the second time,

if you check with an active card, nothing works, the tvsat will not activate... what I wrote in green is missing.

Quote from piterfree

emm_reload_minute = 15

ecmwhitelist = 91

ecmheaderwhitelist = 80308ED387,81308ED387

detect = cd

nagra_read = 2

group = 1

emmcache = 1,2,2,0

auprovid = 005411

ok.....

I'm writing this for the second time,

if you check with an active card, nothing works, the tvsat will not activate... what I wrote in green is missing.

Display More

So, have to wait 15 minutes?

[reader]

label = Tivusat_183E

protocol = internal

device = /dev/sci0

autospeed = 0

caid = 183E

rsakey = A92DA72FEEACF2947B003ED652153B189E4043B0138C368BDF6B9ED77DDAD6C0761A2198AEB3FC97A19C9D01CA769B3FFFE4F6E70FA4E0696A8980E18D8C58E11D817121346E3E66457FDD84CFA72589B25B538EFC304361B54845F39E9EFA52D805E5FD86B595B366C35716ABC91FA3DC159C9F4D8164B5

emm_url = https://pastebin.com/raw/XvRFLquM

emm_reload_minute = 15

ecmwhitelist = 91

ecmheaderwhitelist = 80308ED387,81308ED387

detect = cd

mhz = 368

cardmhz = 368

nagra_read = 2

ident = 183E:000000,005411

group = 1

emmcache = 1,2,2,0

blockemm-unknown = 1

auprovid = 005411

Quote from gigablue pro

Quote from piterfree

emm_reload_minute = 15

ecmwhitelist = 91

ecmheaderwhitelist = 80308ED387,81308ED387

detect = cd

nagra_read = 2

group = 1

emmcache = 1,2,2,0

auprovid = 005411

ok.....

I'm writing this for the second time,

if you check with an active card, nothing works, the tvsat will not activate... what I wrote in green is missing.

Display More

Code

So, have to wait 15 minutes?

[reader]

label = Tivusat_183E

protocol = internal

device = /dev/sci0

autospeed = 0

caid = 183E

rsakey = A92DA72FEEACF2947B003ED652153B189E4043B0138C368BDF6B9ED77DDAD6C0761A2198AEB3FC97A19C9D01CA769B3FFFE4F6E70FA4E0696A8980E18D8C58E11D817121346E3E66457FDD84CFA72589B25B538EFC304361B54845F39E9EFA52D805E5FD86B595B366C35716ABC91FA3DC159C9F4D8164B5

emm_url = https://pastebin.com/raw/XvRFLquM

emm_reload_minute = 15

ecmwhitelist = 91

ecmheaderwhitelist = 80308ED387,81308ED387

detect = cd

mhz = 368

cardmhz = 368

nagra_read = 2

ident = 183E:000000,005411

group = 1

emmcache = 1,2,2,0

blockemm-unknown = 1

auprovid = 005411

Display More

if you are sure of this

Post

RE: 183D/183E EMM Activation via the http/https server with OSCam

(Quote from thechemist1964)


You have this decoder :
-ZGemma H7S
-Octagon SF8008.

To know the architecture of the boxes on which oscam to choose you can choose:

post here Output from Telnet command:

for dreambox and images associated with it

dpkg --print-architecture | grep -iE "arm|aarch64|mips|cortex|sh4|sh_4"


for other boxes (images like pli - atv etc..)
opkg print-architecture | grep -iE "arm|aarch64|mips|cortex|h4|sh_4"


and this command telnet find your SSL library


ls -l /usr/lib/libss*.*

Lululla

Sep 2nd 2023

try this

Post

RE: 183D/183E EMM Activation via the http/https server with OSCam

hem no..

extract to etc/tuxbox attached file
chmod 755 to all file

if you have a cammanager with oscam installed..

go to /usr/bin

rename yopur file oscam-bin to -oscam_old

and extract and rename
with the same name as the old oscam you had the contents of the zip file
Give 755 permissions here too

reboot box

select cam from cam manager and start to.

open browser web

digit

ip_box:8888
user/password is:
oscam
oscam

enjoy

Lululla

Sep 2nd 2023

and report

I need telnet command for gigablue trio 4k

opkg print-architecture | grep -iE "arm|aarch64|mips|cortex|h4|sh_4"

is that right?

arm OpenSSL 3.1.0-r0.1 decoder h9combo atv 7.4

Quote from @dragon@

arm OpenSSL 3.1.0-r0.1 decoder h9combo atv 7.4

this oscam

https://www.linuxsat-support.com/cms/attachment/234655-oscam-11724-798-armv7ve-libusb-openssl-3-x-x-zip/

this config try:

[reader]
label                         = TIVUSAT_HD
protocol                      = internal
device                        = /dev/sci0
autospeed                     = 0
caid                          = 183E
rsakey                        = A92DA72FEEACF2947B003ED652153B189E4043B0138C368BDF6B9ED77DDAD6C0761A2198AEB3FC97A19C9D01CA769B3FFFE4F6E70FA4E0696A8980E18D8C58E11D817121346E3E66457FDD84CFA72589B25B538EFC304361B54845F39E9EFA52D805E5FD86B595B366C35716ABC91FA3DC159C9F4D8164B5
emm_url                       = https://pastebin.com/raw/ZNKDRVWT
detect                        = cd
nagra_read                    = 1
mhz                           = 368
cardmhz                       = 368
ident                         = 183E:000000,005411
group                         = 1
emmcache                      = 1,1,2,0
blockemm-unknown              = 1
auprovid                      = 005411
localcards = 183E:000000,005411 

Quote from gigablue pro

Code

I need telnet command for gigablue trio 4k

opkg print-architecture | grep -iE "arm|aarch64|mips|cortex|h4|sh_4"

Code

is that right?

yes

if there is a problem, everything can be found in the oscam debug log...

samur indicated this in the very first comment.

2023-08-13 16-10-00.png

arm-ssl-1.0.2_2023-08-20 22-33-38.png

this is an example of a working debug 64 log, if it is similar to this photo, then the data was successfully downloaded from the web server with ssl...

(I never use symlinks to cheat oscam ssl version because 1.0.2 is not equal to 1.1.1 and running oscam symlink (to cheat version) can cause unexpected problems or even crash.)

Quote from @dragon@

arm OpenSSL 3.1.0-r0.1 decoder h9combo atv 7.4

In your case, openssl-3.x.x, maybe it doesn't work properly with openssl 3... (and currently there is no perfect openssl 3 fix for oscam)

(translate.google.com)

HI, copy and paste what you have in info...etc/tmp/oscam this way you know if you correctly added samur's oscam.

at least you can tell if it's just the conf... of oscam or the bin

From were you get the different update-urls?

https://pastebin.com/raw/ZNKDRVWT

https://pastebin.com/raw/XvRFLquM

https://rentry.co/ognzc/raw

Which one works permanetly good?

samur I don't know why, but I have this curious error on my Ubuntu which only happens when I start the READER with the HD+ 186A card!

( All the rest is working fine 183D , 183E , 0500 ecc ecc !

Quote from samur

benhur i will take a look

;

Sorry samur by any chance could you please check also oscam-svn11724-AmikoA4-emu-r798 because of on edit oscam.server I never see HTTP section for Nagra card. Thanks in advance and regards.