DM_800_OpenPli 7.2_AU_ssl.84D_piterfree
Clone
vhannibal 2 sat 13+19 dtt
Wiffi ok
softcam.gbox
softcam.oscam
softcam.oscam-emu Tvsat ok thanks samur
DM_800_OpenPli 7.2_AU_ssl.84D_piterfree
Clone
vhannibal 2 sat 13+19 dtt
Wiffi ok
softcam.gbox
softcam.oscam
softcam.oscam-emu Tvsat ok thanks samur
What is the password?
root
1**dreambox**
*********
2**piterfree**
Yes indeed, telnet has no password ftp is dreambox but openwebif works not.
If I try to enter openwebif using firefox or chrome, it only shows error message.
for 800 there is the solution but you have to put the oscam from its feeds the oscam that I put is not adequate for the old version of the soft mips,
to enable web..info you have to download its oscam from the feeds and then configure it normally and then do everything you need.
Please Driver R8712u for dreambox 800 hd no wifi in this image.Thank you
QuoteRecently flashed box using different images, but same problem occurs. It will not find any channels on the service scan. If I go to satfinder it shows a good signal and locked on same in positioner, but when I go to scan it finds nothing. On the front of box it says no service when doing the scan. Is it a software problem or is the tuner gone.
ssl.84D Clone
hi, maybe you don't read... be careful it's soft for Clone you have to send via serial SSL 84D and you will see that afterwards you will have the Tuner, if instead you have an Original decoder with Sim 84 you will be sent a soft that is not suitable for your decoder.
yes
if instead you have an Original try sending SSL 84...maybe it will work.
dreamnbox 800HD Ss84d tuner problem
QuoteRecently flashed box using different images, but same problem occurs. It will not find any channels on the service scan. If I go to satfinder it shows a good signal and locked on same in positioner, but when I go to scan it finds nothing. On the front of box it says no service when doing the scan. Is it a software problem or is the tuner gone.
if the signal finder is getting a signal locked
means the tuner is working.
hi, Is Wi-Fi installed and working in this image?
piterfree?
piterfree?
hi, I don't remember, it depends on which driver you use, there are so many that you would have to test with every available WiFi and this decoder doesn't have enough space to use them, I don't put them for this reason.
piterfree?
hi, I don't remember, it depends on which driver you use, there are so many that you would have to test with every available WiFi and this decoder doesn't have enough space to use them, I don't put them for this reason.
I tested it. Perfect image.and the wifi active Thanks. But i have one problem whiche is the Sattelites list contain just 2 (astra and hotbird) how i can put other Sattelites especially nilsat.
simple put if I remember there is the vhannibal plugin from there you can download the satellites you want and then restart and set the data after the restart, or do a factory reset which only loses small settings among the simplest channel list and settings Tuner.
Hi guy,
can I use this image in my DM800HD clone with sim Ferrari or sim2.1 ?
I have to flash also the ssl.84D after or it's inside to image ?
thansk
by marcy-g
Display MoreHi guy,
can I use this image in my DM800HD clone with sim Ferrari or sim2.1 ?
I have to flash also the ssl.84D after or it's inside to image ?
thansk
by marcy-g
No, you need as well the correct drivers for the sim you use, not only the SSL... otherwise it will not work.
TS
hi. Please how can i use flashexpander.
I put usb drive but the plugin didn't detect it in this plugin. But in mount manager i can manage it?
So how i can use usb drive as an external memory?
piterfree?
Don’t have an account yet? Register yourself now and be a part of our community!