I finished the backup of the dream 800 if I take it now
the zetagemma h9se,
I have the decoder.
ATV 6.4 and configuration tuner sat
- jeansmania
- Thread is marked as Resolved.
There are 55 replies in this Thread which was already clicked 2,631 times. The last Post () by jeansmania.
-
-
-
ATV 6.4 does not exist for this decoder
I can't do it I'll have to see with h9 combo
ATV 6.4 isn't even available for h9 combo
I'm downloading it, I'll test it
it stops at openatv-6.4-zgemmah9combo-20221110_multi
it would be time to change it..but text...ok -
What is the current status?
Have you flashed a different image? If so which one?
If you are still on ATV 6.4, have you solved the satellites.xml issue?
-
-
That is wrong configuration for a diseqc switch. You have selected tone burst. The correct configuration was posted earlier in the thread.
-
No good news unfortunately. I didn't change the firmware version because I wanted to know how to fix my problem...
-
No good news unfortunately. I didn't change the firmware version because I wanted to know how to fix my problem...
solution was written. You use toneburst instead of simple diseq Diseq A/B with port A for HB and B for Astra
-
j
-
Using Tone burst for a diseqc switch is not the correct option. If you have to do this, then this might be a driver issue.
DiSEqC explanation | EMP-CentauriControl your satellite equipment and accessories using DiSEqC - Digital Satellite Equipment Control. EMP-Centauri switches support DiSEqC 2.0 commands and…emp-centauri.czI would recommend that you flash ATV 7.3 to keep the menus familiar to what you have now. Use the "flash on the fly" option in the blue button menu to do this. It should.
If you want to persevere fixing the issue:
Regarding the corrupt xml message-
Do you have a satellites.xml in etc/enigma2? Check with FTP program like Filezilla. If you do, delete it. Download the satellites.xml that was uploaded for you, make sure it is unzipped. Transfer it to /etc/tuxbox. Then restart the box.
Your choice whether you use toneburst or Diseqc.
-
-
What setting did you use? Post a picture please.
-
I understand...(monoblock) this is done on purpose, it's a fixed LNB with 2 eyes, if I'm not mistaken, a configuration needs to be done...simple with Tunerburst A/B...that's the only way it works if I have it change,
Universal monobloc LNB 0.2 dB with built-in Diseqc switch. Ideal for contemporary reception
of satellites.
Hot Bird 13 east and Eutelsat satellite 9 east or Astra 19.2 and Astra 23.5 with a receiver . It works optimally with all 80 cm diameter dishes. Supplied individually, clamp adapter from 23 to 40 mm.
THE
Technical features
Monoblock Universal LNB for 2 satellites 4 degrees apart
1 Output for a receiver
4K
4G
Noise figure 0.2 dB
Built-in Diseqc switch
Diameter of connection to the dish (clamp): 23 - 40 mm
Warranty: 24 MONTHS
Working Frequency: 10.7 - 12.75 GHz
DiSEqC A= 13° EXT
DiSEqC B= 9° EXT
Link to the manufacturer's technical data sheet
-
My monobloc is HUMAX
-
the function is the same for all monoblocks and the same functionality
-
Is it possible to install Kodi on zgemma with OBH firmware 5.3 ?
Zgemma H9 Support Forum - Combo Tuner DVB-S2X DVB-C/T2 Linux Enigma2 Multi-stream QT Stalker WiFi Digital Receiver
Download Zgemma H9 Twin SE, Zgemma H9 Combo, Zgemma H9 Combo SE, Zgemma H9s and Zgemma H9s SE 4K UHD Series Images and Enigma2 Team Support from OpenATV, OpenBh, OpenDroid, OpenESi, OpenHDF, OpenPLi, OpenLD, OpenSPA, OpenViX, OpenVision, PKT Hyperion, PurE2, SatDreamGR, Sat-Lodge.
Participate now!
Don’t have an account yet? Register yourself now and be a part of our community!