Bouquet Maker Xtream - IPTV Bouquet Maker (new 2023)

Quote from Gleed

Hi,

Brand new to using E2 boxes so not sure If I am being an idiot or not.

I have gone through the effort to manually organise my IPTV provider into the sky categories and channel numbers using iptveditor.com, very happy with how everything looks. However, when I add my playlist to my box using this plugin the channel numbers do not match, they seem to be generated internally. How do I get the channel numbers I setup on the playlist to work with this plugin? The channel numbers work in other apps such as sparkle player.

Thanks

Display More

Do you also have satellite or terrestrial channels numbering starts from them first then iptv bouquets follow on ,I take it in iptveditor your channels start from number 1 in first category then continue on to others.

example my first satellite channel is bbc one and that is number 101

Quote from urie

Quote from Gleed

Hi,

Brand new to using E2 boxes so not sure If I am being an idiot or not.

I have gone through the effort to manually organise my IPTV provider into the sky categories and channel numbers using iptveditor.com, very happy with how everything looks. However, when I add my playlist to my box using this plugin the channel numbers do not match, they seem to be generated internally. How do I get the channel numbers I setup on the playlist to work with this plugin? The channel numbers work in other apps such as sparkle player.

Thanks

Display More

Do you also have satellite or terrestrial channels numbering starts from them first then iptv bouquets follow on ,I take it in iptveditor your channels start from number 1 in first category then continue on to others.

example my first satellite channel is bbc one and that is number 101

Display More

I am only using IPTV channels, not satellite at the moment, Plan to use that as a backup but need to swap the LNB first. I am using the sky channel numbers so BBC One is 101 BBC Two is 102 etc

On my box at the moment BBC One is 1, BBC Two is 2 and they just follow in order.

Quote from Gleed

Quote from urie

Quote from Gleed

Hej,

Helt nybörjare på att använda E2-boxar så jag är inte säker på om jag är en idiot eller inte.

Jag har försökt organisera min IPTV-leverantör manuellt i Sky-kategorier och kanalnummer med hjälp av iptveditor.com, och är väldigt nöjd med hur allt ser ut. Men när jag lägger till min spellista i min mottagare med hjälp av det här pluginet matchar inte kanalnumren, de verkar genereras internt. Hur får jag kanalnumren jag har ställt in i spellistan att fungera med det här pluginet? Kanalnumren fungerar i andra appar som Sparkle Player.

Tack

Display More

Har ni även satellit- eller markbundna kanaler? Numreringen börjar med dem först, sedan följer IPTV-buketter. Jag antar att i IPTV börjar era kanaler från nummer 1 i den första kategorin och fortsätter sedan till de andra.

Exempel, min första satellitkanal är BBC One och det är nummer 101.

Display More

Jag använder bara IPTV-kanaler, inte satellit för tillfället. Planerar att använda det som backup men behöver byta LNB först. Jag använder Sky-kanalnumren så BBC One är 101, BBC Two är 102 etc.

På min mottagare just nu är BBC One 1, BBC Two är 2 och de följer bara ordningen.

Display More

I don't know what receiver you have, but you have the Extended NumberZap plugin.

Quote from pinokio0

Quote from Gleed

Quote from urie

Quote from Gleed

Hej,

Helt nybörjare på att använda E2-boxar så jag är inte säker på om jag är en idiot eller inte.

Jag har försökt organisera min IPTV-leverantör manuellt i Sky-kategorier och kanalnummer med hjälp av iptveditor.com, och är väldigt nöjd med hur allt ser ut. Men när jag lägger till min spellista i min mottagare med hjälp av det här pluginet matchar inte kanalnumren, de verkar genereras internt. Hur får jag kanalnumren jag har ställt in i spellistan att fungera med det här pluginet? Kanalnumren fungerar i andra appar som Sparkle Player.

Tack

Display More

Har ni även satellit- eller markbundna kanaler? Numreringen börjar med dem först, sedan följer IPTV-buketter. Jag antar att i IPTV börjar era kanaler från nummer 1 i den första kategorin och fortsätter sedan till de andra.

Exempel, min första satellitkanal är BBC One och det är nummer 101.

Display More

Jag använder bara IPTV-kanaler, inte satellit för tillfället. Planerar att använda det som backup men behöver byta LNB först. Jag använder Sky-kanalnumren så BBC One är 101, BBC Two är 102 etc.

På min mottagare just nu är BBC One 1, BBC Two är 2 och de följer bara ordningen.

Display More

I don't know what receiver you have, but you have the Extended NumberZap plugin.

Display More

It is a zgemma h9s. I do not see the extended numberzap plugin anywhere

Quote from Gleed

Quote from urie

Quote from Gleed

Hi,

Brand new to using E2 boxes so not sure If I am being an idiot or not.

I have gone through the effort to manually organise my IPTV provider into the sky categories and channel numbers using iptveditor.com, very happy with how everything looks. However, when I add my playlist to my box using this plugin the channel numbers do not match, they seem to be generated internally. How do I get the channel numbers I setup on the playlist to work with this plugin? The channel numbers work in other apps such as sparkle player.

Thanks

Display More

Do you also have satellite or terrestrial channels numbering starts from them first then iptv bouquets follow on ,I take it in iptveditor your channels start from number 1 in first category then continue on to others.

example my first satellite channel is bbc one and that is number 101

Display More

I am only using IPTV channels, not satellite at the moment, Plan to use that as a backup but need to swap the LNB first. I am using the sky channel numbers so BBC One is 101 BBC Two is 102 etc

On my box at the moment BBC One is 1, BBC Two is 2 and they just follow in order.

Display More

I do not know it you could try changing numbering mode in menu > setup > usage & gui > Channel Selection Settings.

Quote from Gleed

Quote from pinokio0

Quote from Gleed

Quote from urie

Quote from Gleed

Hej,

Helt nybörjare på att använda E2-boxar så jag är inte säker på om jag är en idiot eller inte.

Jag har försökt organisera min IPTV-leverantör manuellt i Sky-kategorier och kanalnummer med hjälp av iptveditor.com, och är väldigt nöjd med hur allt ser ut. Men när jag lägger till min spellista i min mottagare med hjälp av det här pluginet matchar inte kanalnumren, de verkar genereras internt. Hur får jag kanalnumren jag har ställt in i spellistan att fungera med det här pluginet? Kanalnumren fungerar i andra appar som Sparkle Player.

Tack

Display More

Har ni även satellit- eller markbundna kanaler? Numreringen börjar med dem först, sedan följer IPTV-buketter. Jag antar att i IPTV börjar era kanaler från nummer 1 i den första kategorin och fortsätter sedan till de andra.

Exempel, min första satellitkanal är BBC One och det är nummer 101.

Display More

Jag använder bara IPTV-kanaler, inte satellit för tillfället. Planerar att använda det som backup men behöver byta LNB först. Jag använder Sky-kanalnumren så BBC One är 101, BBC Two är 102 etc.

På min mottagare just nu är BBC One 1, BBC Two är 2 och de följer bara ordningen.

Display More

I don't know what receiver you have, but you have the Extended NumberZap plugin.

Display More

It is a zgemma h9s. I do not see the extended numberzap plugin anywhere

Display More

I just did a search for that plugin over 5 years old and will not be python 3
Extended Number Zap Plugin

GitHub - Dima73/Extended-NumberZap: Extended number zap addon for enigma2

Extended number zap addon for enigma2. Contribute to Dima73/Extended-NumberZap development by creating an account on GitHub.

github.com

Quote from Gleed

Quote from pinokio0

Quote from Gleed

Quote from urie

Quote from Gleed

Hej,

Helt nybörjare på att använda E2-boxar så jag är inte säker på om jag är en idiot eller inte.

Jag har försökt organisera min IPTV-leverantör manuellt i Sky-kategorier och kanalnummer med hjälp av iptveditor.com, och är väldigt nöjd med hur allt ser ut. Men när jag lägger till min spellista i min mottagare med hjälp av det här pluginet matchar inte kanalnumren, de verkar genereras internt. Hur får jag kanalnumren jag har ställt in i spellistan att fungera med det här pluginet? Kanalnumren fungerar i andra appar som Sparkle Player.

Tack

Display More

Har ni även satellit- eller markbundna kanaler? Numreringen börjar med dem först, sedan följer IPTV-buketter. Jag antar att i IPTV börjar era kanaler från nummer 1 i den första kategorin och fortsätter sedan till de andra.

Exempel, min första satellitkanal är BBC One och det är nummer 101.

Display More

Jag använder bara IPTV-kanaler, inte satellit för tillfället. Planerar att använda det som backup men behöver byta LNB först. Jag använder Sky-kanalnumren så BBC One är 101, BBC Two är 102 etc.

På min mottagare just nu är BBC One 1, BBC Two är 2 och de följer bara ordningen.

Display More

I don't know what receiver you have, but you have the Extended NumberZap plugin.

Display More

It is a zgemma h9s. I do not see the extended numberzap plugin anywhere

Display More

It's an extended numberzap plugin that is inserted and installed into the receiver, but I don't know if it can be installed into your Zgemma H9s, since I have a Dreambox Two.

Quote from urie

Quote from Gleed

Quote from urie

Quote from Gleed

Hi,

Brand new to using E2 boxes so not sure If I am being an idiot or not.

I have gone through the effort to manually organise my IPTV provider into the sky categories and channel numbers using iptveditor.com, very happy with how everything looks. However, when I add my playlist to my box using this plugin the channel numbers do not match, they seem to be generated internally. How do I get the channel numbers I setup on the playlist to work with this plugin? The channel numbers work in other apps such as sparkle player.

Thanks

Display More

Do you also have satellite or terrestrial channels numbering starts from them first then iptv bouquets follow on ,I take it in iptveditor your channels start from number 1 in first category then continue on to others.

example my first satellite channel is bbc one and that is number 101

Display More

I am only using IPTV channels, not satellite at the moment, Plan to use that as a backup but need to swap the LNB first. I am using the sky channel numbers so BBC One is 101 BBC Two is 102 etc

On my box at the moment BBC One is 1, BBC Two is 2 and they just follow in order.

Display More

I do not know it you could try changing numbering mode in menu > setup > usage & gui > Channel Selection Settings.

Display More

Just tried that, doesn't seem to have made a difference. Its almost as if Bouquet Maker Xtream is not providing the channel numbers

If it matters at all, I am on the latest openATV, just installed today

On ATV if you go to: Menu/Setup/Usage & GUI/Channel selection settings you can set "Numbering mode" to "Bouquets start at 1".

1_0_1_3E9_10E1_217C_EEEE027A_0_0_0_20250605031630.jpg

Quote from Bella Italia

On ATV if you go to: Menu/Setup/Usage & GUI/Channel selection settings you can set "Numbering mode" to "Bouquets start at 1".

1_0_1_3E9_10E1_217C_EEEE027A_0_0_0_20250605031630.jpg

I already posted that info but that is no good as it starts at 1 in each bouquet .

Gleed ok found a way to get them but it only starts from 1 and carries on through all bouquets

this was posted by abu baniaz on another forum.

You can issue these commands in terminal which will remove all bouquets. Paste instead of type to prevent risk of errors

opkg remove enigma2-plugin-settings-defaultsat

init 4 && opkg remove enigma2-plugin-settings-defaultsat && sleep 10 && rm -rf /etc/enigma2/lamedb* && rm -rf /etc/enigma2/*.tv && rm -rf /etc/enigma2/*.radio && rm -rf /etc/enigma2/*.del && init 3

Make sure you do complete backup first.

And you will need to run bouquets maker xtream once done to remake bouquets

Quote from urie

Gleed ok found a way to get them but it only starts from 1 and carries on through all bouquets

this was posted by abu baniaz on another forum.

You can issue these commands in terminal which will remove all bouquets. Paste instead of type to prevent risk of errors

opkg remove enigma2-plugin-settings-defaultsat

init 4 && opkg remove enigma2-plugin-settings-defaultsat && sleep 10 && rm -rf /etc/enigma2/lamedb* && rm -rf /etc/enigma2/*.tv && rm -rf /etc/enigma2/*.radio && rm -rf /etc/enigma2/*.del && init 3

Make sure you do complete backup first.

And you will need to run bouquets maker xtream once done to remake bouquets

Display More

urie Cheers for this, however that is actually how it works right now! The default seems to be it starting from 1 and carries on through all bouquets, they dont start at 1 on each bouquet unless I change the setting mentioned elsewhere in this thread.

What I was looking for was to use the tvg-chno value from the IPTV server for the service numbers but upon further reading that may not be possible with this plugin, thanks for all your help everyone but I think what I am trying to do simply isn't supported by Bouquet Maker Xtream. I can export a m3u from iptveditor and I have seen some scripts floating around that can convert those into enigma 2 bouquets so that might be the next thing I try.

Quote from Gleed

Quote from urie

Gleed ok found a way to get them but it only starts from 1 and carries on through all bouquets

this was posted by abu baniaz on another forum.

You can issue these commands in terminal which will remove all bouquets. Paste instead of type to prevent risk of errors

opkg remove enigma2-plugin-settings-defaultsat

init 4 && opkg remove enigma2-plugin-settings-defaultsat && sleep 10 && rm -rf /etc/enigma2/lamedb* && rm -rf /etc/enigma2/*.tv && rm -rf /etc/enigma2/*.radio && rm -rf /etc/enigma2/*.del && init 3

Make sure you do complete backup first.

And you will need to run bouquets maker xtream once done to remake bouquets

Display More

urie Cheers for this, however that is actually how it works right now! The default seems to be it starting from 1 and carries on through all bouquets, they dont start at 1 on each bouquet unless I change the setting mentioned elsewhere in this thread.

What I was looking for was to use the tvg-chno value from the IPTV server for the service numbers but upon further reading that may not be possible with this plugin, thanks for all your help everyone but I think what I am trying to do simply isn't supported by Bouquet Maker Xtream. I can export a m3u from iptveditor and I have seen some scripts floating around that can convert those into enigma 2 bouquets so that might be the next thing I try.

Display More

Yes I was not thinking you only have iptv bouquets i had tried the commands on other slot :)

Quote from KiddaC

I dont think you can do this.
My bouquet maker just adds bouquets that exist. So they will start from 1.

The satellite bouquets will add in a load of empty rows to get the correct numbers.

And I say this all the time. When ever BMX auto updates. All your edits will be gone anyway.

Example satellite bouquets created by ABM. Lots of blanks to get the correct numbers

pasted-from-clipboard.png

Display More

I see, I am new to E2 so wasn't aware of its limitations regarding service numbers. Seems like a crazy brute force method to use blanks to get the correct numbers to be assigned. Do you know if these blanks show up in the EPG? For reference I am using your Slyk 1080 R19 skin.

I have been considering writing my own script to create the bouquets in the specific way I want them as I have a few older people in the house that have the sky channel numbers burned into their head (I personally couldn't give a damn) and this seems like the only way to get this done, I also imagine doing it this way will give me more flexibility when it comes to integrating SAT channels once I get the LNB swapped, I thought it would be nice to use the SAT for all unencrypted channels and only slot in the IPTV channels in place of the encrypted channels.

Hey Kiddac, great plugin you wrote here, I would probably have moved away from E2 only for some of your contributions, so big thankyou for your work..

I have a question RE: special symbols in the m3u, I came across a playlist with special characters like for example below:

group-title="4K| RELAX ᵁᴴᴰ ³⁸⁴⁰ᴾ ☼",4K: RELAX 1 ᵁᴴᴰ 3840P
group-title="UK| GENERAL ᴴᴰ/ᴿᴬᵂ",UK: BBC 1 HD ◉
group-title="UK| SPORT ⱽᴵᴾ",VIP: SLY SPORTS MIX ʰᵉᵛᶜ

Because the special symbols seem to be skipped/ignored, I end up with numerous groups with the same name like below:

UK| SPORT

UK| SPORT

UK| SPORT

UK| SPORT

rather than:

UK| SPORT SD

UK| SPORT HD

UK| SPORT VIP

UK| SPORT PPV

Is this a limitation of E2 font/character display or is it something that the plugin could work around?

Just a reminder about this one Kiddac..

Quote from KiddaC

I strip most non ascii characters out, because it also gets used as a filename.
I am a little busy with my new stalker plugin at the moment, but remind me again next week and I might be able to help you.