If you are going to have a go at installing yourself, read this thread:
ThreadHelp Correctly Aligning My 1.2M Channel Master Dish and moteck H-H180 motorHi People so i need Help Correctly Aligning My 1.2M Channel Master Dish and moteck H-H180 motor, if you can help that be great thanks, my location is kings lynn norfolk (for long and lat), so my 1.2m CM (Channel Master) satellite dish is ground mounted to a pole and base, (see my attached pics showing how it currently looks),
please help me understand what im doing wrong, i need to align it to Thor 0.8w first so it can track the arc, i currently have no signal from any satellites :(
please…The motors are very similar, the same principles apply to all installs anyways. What works for one person will not be exactly the same for another.
Take you time and read that thread in its entirety, despite several members spending a lot of there time, explaining everything in great detail the OP became abusive and was banned, however everything you need to know is there.
ok ok thanks, just wondering what the correct angles are thats all (like what number is the motor at for 0.8w), i wont post any of my details here for obvious reasons but my setup should be the same as his due to the fact im not that far away from this person!
i would like your explanation please @jenseneverest, that post sounds to confusing really so much different information there, so i'm here asking for your help if you don't mind Sir