More infos can be found here
https://jb8a8f8.com/support/in…232-chip-information.264/
CodeRJ12 auf Rückseite VU+ Ultimo 4K (6 Pins) DB9F Sub DB9 Female 9 Pin (2-reihig) Standard Comport früher auf PC heute braucht man usb2Seriell umwandler GND: RJ12 Pin 5 -> DB9F Pin 5 TX: RJ12 Pin 2 -> DB9F Pin 3 RX: RJ12 Pin 1 -> DB9F Pin 2
Yes this is the exact method . he should fallow this procedure .
The Problem would be that all Images are USB but seems for Seriall he needs .NFI Image
Mabe it works but i never done it this way
If Nothing else work use Johhnys Method over BCM Studio but be sure what you do Otherwise you will Kill Your Box
And if you miss this VU+ Tool here it is
More infos can be found here
https://jb8a8f8.com/support/in…232-chip-information.264/
CodeRJ12 auf Rückseite VU+ Ultimo 4K (6 Pins) DB9F Sub DB9 Female 9 Pin (2-reihig) Standard Comport früher auf PC heute braucht man usb2Seriell umwandler GND: RJ12 Pin 5 -> DB9F Pin 5 TX: RJ12 Pin 2 -> DB9F Pin 3 RX: RJ12 Pin 1 -> DB9F Pin 2Yes this is the exact method . he should fallow this procedure .
From previous posts, I think , its just DB9 connectors on both end, So, RJ12 on one end and DB9 on Box side.
The Problem would be that all Images are USB but seems for Seriall he needs .NFI Image
Mabe it works but i never done it this way
Obviously not . NFI file was used in old mips boxes . Not for solo2 . duo2 and other boxes released after that.
First of all we must need putty logs. which will clear the actual problem /issue. I cant blindly suggest it what to do here . Suppose it has crashed boot loader . Than there is another way to update it via hyper terminal .
But if the flash is corrupted . Than needs Broadcom studio but it will not work without cypress boards .
Display MoreMore infos can be found here
https://jb8a8f8.com/support/in…232-chip-information.264/
CodeRJ12 auf Rückseite VU+ Ultimo 4K (6 Pins) DB9F Sub DB9 Female 9 Pin (2-reihig) Standard Comport früher auf PC heute braucht man usb2Seriell umwandler GND: RJ12 Pin 5 -> DB9F Pin 5 TX: RJ12 Pin 2 -> DB9F Pin 3 RX: RJ12 Pin 1 -> DB9F Pin 2Yes this is the exact method . he should fallow this procedure .
From previous posts, I think , its just DB9 connectors on both end, So, RJ12 on one end and DB9 on Box side.
Depends how u see it . Obviously DB9 can also work. If u have this cable supplied with box in some models because it has different connection . Johnny has clearly mentioned and draw the pics in his post.
There is no supplied cable, only old RS232 , which I used few time with my old DM800, I think called Null modem
I don't see this cable in my store may be misplaced some where if I find I will share its picture .
Through google search I have found I had shared its connection diagram in my friend Johnny's post . I share pic here if u can make it ur self . Its not that kind difficult.
Attention, there is 2 cables, the Null cable should be ok for logging with Putty the normal "enigma2/linux" log...
The "special cable" that is wired differently, as jb8a8f8/8a8f8/etc is in fact a cable for the CLONES VU+ Solo/Solo2/Duo... these are connecting a specific pin to have the log and access to the clone security chip.
TS
There is no supplied cable, only old RS232 , which I used few time with my old DM800, I think called Null modem
I don't see this cable in my store may be misplaced some where if I find I will share its picture .
Through google search I have found I had shared its connection diagram in my friend Johnny's post . I share pic here if u can make it ur self . Its not that kind difficult.
Yes, I try manage this , may have few DB9 connectors in some of my cupboard
U have screen shots . I want to see it if its connected successfully .
It should return out put .
Rizwan Awan ..I think flash need to be repaired ,bad sector might be exists in flash ..AliRaza is master in this field ..you may send your box to Arifwala
Its my pleasure, if he agree
I have a Sunray Vu+ Solo2 with Sunray hologram on backpanel and bricked with OpenPli 9 original image.
Tried to recover with all the methods i found here, jtag , rs232 and the box is not responding (only the power led is on).
Someone has a full-flash bin backup/dump from the Samsung K9F2G08U0C chip that i can flash the chip with an Universal Programmer TSOP-48 NAND Flash?
Don’t have an account yet? Register yourself now and be a part of our community!
