Which brand new Diseqc motor to choose

There are 41 replies in this Thread which was already clicked 6,984 times. The last Post () by claihew.

    I checked creative and total for you delivered is 5,846.28 and that is £108.95. I also rang them but was left holding on. I can see your concern. The dark motor is good as well.


    Thats odd, I sent an email as well and that has got bounced!!

    I don't think that company has a shop anymore and they only sell via ebay now, and the ebay store only shows the TM2300 M3

    Quote from claihew

    I checked creative and total for you delivered is 5,846.28 and that is £108.95. I also rang them but was left holding on. I can see your concern. The dark motor is good as well.


    Thats odd, I sent an email as well and that has got bounced!!

    No worries. My bro lives in London for more than 20 years. He can manage to buy and collect for me. Thank you

    The question is - is TM 2600 really available in stock of this Creative firm? 🤔

    For what it's worth, if I hadn't found the brand new old stock stab motor, then I would have got the TM2300 M3 from WOS, I did ask them if they are any good and they said they have never had any returned and they have been selling them for a few years now.


    WOS is also the cheapest for a TM2300 in the UK.

    No. I searched everywhere and on the technomate website it only lists the 2300. Well I learnt something, did not realise it was discontinued. My dark motor has been up for years, about 10 and no problems.

    Quote from claihew

    No. I searched everywhere and on the technomate website it only lists the 2300. Well I learnt something, did not realise it was discontinued. My dark motor has been up for years, about 10 and no problems.

    Alsat also no longer exist, thus the Dark Motor is no longer available new either afaik.

    I think the only options now for a new metal gear diseqc motor is a SkyRevolt, Moteck SG2500A or an Amiko DM3800.


    Out of the 3 i'd prob go for the Moteck but they are almost twice the price of the TM2300 from WOS,

    Why do you need a multifeed on the engine? It will take all your satellites in its own way. You can install a circular convector or a C range next to the linear one, or better yet, a combined KUI S. I had one that worked for me.

    Quote from mayday10
    Quote from claihew

    That tm2300 is highly rated, whats your worry? And where are you located?

    I live in Ukraine, and want to buy it.

    Put combined si. -ku range.N

    Edited once, last by oktus: Merged 2 posts created by krezy into this post. ().

    Quote from claihew

    I checked creative and total for you delivered is 5,846.28 and that is £108.95. I also rang them but was left holding on. I can see your concern. The dark motor is good as well.


    Thats odd, I sent an email as well and that has got bounced!!

    I've got an email from creative this evening with a statement that Technomate TM 2600 is no longer available for purchase. They offered me to buy TM 2300 M3 model instead. 😀

    Quote from Ev0

    I think the only options now for a new metal gear diseqc motor is a SkyRevolt, Moteck SG2500A or an Amiko DM3800.


    Out of the 3 i'd prob go for the Moteck but they are almost twice the price of the TM2300 from WOS,

    I've asked my bro to manage to buy Technomate TM 2300 M3 for me. As a matter of fact, avoiding of buying some used and old stuff for lower prices, for my nervous system sake. Thank you for your advices and recommendations 🤗

    Edited once, last by oktus: Merged a post created by mayday10 into this post. ().

    Edited once, last by mayday10 ().

    Hello to all,


    My bro has received an ordered new TM 2300 M3 by registered mail from WoS this morning. It costs about 68 quids, including shipping. So I'll try to watch some new satellites, comprising Astra 1G 28.2E in my country 🤗


    Thank you all mates, for your vital advices and suggestions regarding diseqc motor selection. It is really very appreciated indeed 😀

    Quote from mayday10
    Quote from Ev0

    USALS

    Are there any tutorial or manual how to manage to do it with USALS?

    Many thanks dear

    The instruction manual should explain what you need to do.

    But in simple terms go to http://www.dishpointer.com, enter your address and tell it which motor you are using (Motech SG2100 will be the same as the TM2300) and it will tell you what your longitude and latitude are, aswell as the dish elevation you need to set (the dish elevation and the motor elevation will be listed in the TM2300 manual though).

    Then point the whole assembly at due south (use a compass), enter the longitude and latitude figures that dishpointer gave you into your stb in the tuner setup menu, and then move the dish to the closest sat to your due south (for me in the UK it is 0.8w).

    Once you have found the sat that is closest to your due south, make minor adjustments (move the motor and dish on the pole they are mounted on) left and right to maximise the signal, then do the same with the dish elevation. Once happy you have the best signal, move to the furthest east and then furthest west sats and make sure you have good signals on them, if you do, then job done, and if not then go to back to reference sat (closest to due south) and make minor adjustments again as it isn't tracking the arc correctly (most likely the dish elevation is out).

Get help choosing and installing satellite equipment.

Whether you're new or upgrading, post here for community-driven buying guides and setup advice.

Participate now!

Don’t have an account yet? Register yourself now and be a part of our community!

Register Yourself Login