Display MoreDisplay MoreToday I found an additional issue. It does refer to another thread that I opened last summer:
The mentioned problem was brilliantly solved in the beta version at that time.
But after installing the official 7.6 in my Duo4KSE I noted that the SCPC setting was removed, and now my tuner is not able to lock 3 or 4 very nearly placed transponders.
The easiest way to test is searching for the 3 EBU frequencies at 7 East: 11044H, 11050H and 11056H, SR 4937.
After one of those was stored, trying to tune one of the remaining, the first one is very ofter overwritten including the transponder parameters, as the tuner does not handle correctly the SCPC parameters.
Please note that the SCPC feature was present in the tuner configuration in that beta version, but not in the official one.
What do you think? Thanks.
capture_001_26012026_163618.png
Try use 11042H, 11048H, 11054H (even though your LOF may be shifted by 2 MHz)
As soon as I have a little bit of time I make this additional test, but I seriously doubt that the issue is the OL frequency because I use two SMW PLL LNBs on my CM 2'4m dish.
I suspect that the problem is the tuner handling by the image. And, again, I do not understand why the SCPC option was removed.
Also, I will perform the same test on my DM920 that includes a different type of tuner.
