Strange behaviour with OpenATV and IPTV

There are 19 replies in this Thread which was already clicked 3,257 times. The last Post () by toysoft.

    Hi all,


    I have an Octagon SF8008 4K box running the latest OpenATV version.


    IPTV works well using the 4097 service code but timeshift doesn't work, so after some searching I found that I can replace 4097 with 1 to use the built in DVB player. That works for timeshift but when zapping to another channel, the screen is black (with audio) for around 5 seconds and then there's lag on the video for another 5-10 seconds.


    Using 4097, channel switching is really fast, but should timeshift work?


    Thanks!

  • Lululla

    Approved the thread.

    Recording IPTV, I think is an issue, if you deactivate ServiceApp, and you set the ID 4097, etc directly, it could gain some more stability, but on my experience you cannot get more than 1 Minute of recording.


    TS

    It's odd as recording is fine, it's just timeshift that doesn't work. Pausing the stream just pauses it like it would on say VLC, but when I change the service code to 1, I get the same pause, rewind etc as I do on satellite.


    I'll try uninstalling ServiceApp and see what impact that has.

    This is what I've observed:


    ServiceApp uninstalled

    Using enigma2 original playback system


    #SERVICE 1 - there is a delay (black screen) of video for about 5/6 seconds and then some slow motion (possibly HiSilicon chip related, similar to DVB-S2). Pause, rewind, timeshift, record all working


    #SERVICE 4097 - no delay, zap is pretty instant. No rewind, timeshift, but can record, though the channel name doesn't appear in the movie playlist


    It seems using service 1 which uses the same player used for DVB-S2 allows recording and timeshift but there are big delays on zapping.

    How to used enigma 2 h264 ?


    Ciao a tutti

    vu+duo4kse - openblackhole 5.5.1

    Mi allego a questa discussione perchè non trovo info nel Web

    In tanti oramai utilizzano plugin come xklass/xstreamity

    Ma leggendo questa discussione mi sembra di capire che con OpenATV si riesce a non avere sfarfallii su enigma2 usando nella riga 4097 invece di 1

    Mi potete spiegare se è possibile in base al tipo di immagine come fare , se devo disinstallare/installare un codec video ecc... per vedere canali stream senza

    problemi e senza plugin esterni.

    1) è il reader Dreambox/open standard (usato dal DVB)


    4097) Gstreamer


    500x) Exteplayer3,


    dunque è a secondo del player, Exteplayer3 ha bisogno di meno potenza e funziona molto bene, dunque scegli quello che ti va meglio, certe imagini hanno i 3 players,


    TS

    Quote from Vincy792004

    Se vorrei provare con openBlackHole

    Devo installare qualche plugin per il cambio codec ?

    Non si parla di Codec, ma di player, devi avere ffmpeg+exteplayer3 per questa 3za opzione, altrimenti di nativo c'è il player dvb enigma2/DMM e poi il gstreamer (4097).


    Tutto questo deve essere nei feeds dell'imagine, e deve essere ancora supportata, dunque avere feeds attivi per installare se non c'è gia nell'imagine in nativo che installi.


    TS

    not sure about dreambox but normally DVB(1) normally for live , then 4097 for IPTV and Gstreamer is (5001) and Exeplayer (5002)


    Vincy792004 from telnet:



    Code
    opkg update

opkg remove enigma2-plugin-systemplugins-serviceapp
opkg remove exteplayer3
opkg remove ffmpeg
opkg install ffmpeg
opkg install exteplayer3
opkg install enigma2-plugin-systemplugins-serviceapp
opkg remove gstplayer
opkg install gstplayer

    This is for openatv

    Ciao a tutti

    non ho utilizzato nessun opkg install

    ho semplicemente sostituito 1 con ( 4097 )

    Funziona tutto in maniera perfetta ( immagine stabile cambio canale Veloce )

    Unica info: il Player utilizzato è MediaPlayer ( InfoBar )

    Grazie a tutti per le info date.

    Dunque stai usando GStreamer 4097, che gia va bene, e Exteplayer3 va ancora meglio (e fa i VoD), ma codice 500x.


    TS

OpenATV Team Images Support Forum ~ based on OE-Alliance

OpenATV Supported Models ~ Airdigital, Amiko, Anadol, Atemio, Atto, AX Technology, Axas, Beyonwiz, Dinobot, Dreambox, Edision, EVO, Ferguson, Formuler, Galaxy Innovations, Gigablue, Golden Interstar, HDBox, Hitube, James Donkey, IQON, Izibox, Jepssen, Maxdigital, Medialink, MaXytec, MediaArt, Megaset, Miraclebox, MK-Digital, Mut@nt, Novaler, Octagon, Odin, Optibox, Protek, PULSe, Qviart, Red-Eagle, Relook, Roxxs, SAB, Sezam, Sogno, Space, Spycat, Technomate, Telestar, Tiviar, T-Rex, Uclan, Venton Unibox, Vimastec, VisionNet, VU+, VUplus, World Vision, Vizyon, WWio, Xsarius, and Xtrend.

Participate now!

Don’t have an account yet? Register yourself now and be a part of our community!

Register Yourself Login