Is there a specific USB Wi-Fi dongle model I should use to have a connection on the Dreambox 900 ?
dreambox DM 900 help
- nillsat
- Thread is marked as Resolved.
-
-
To summarize the procedure for backing up the original configuration of my DM 900,
I need to be connected to the internet and retrieve the original recovery files from the network.
I haven't found much information on this topic.
-
Which image are you using at the moment?
-
The Dreambox is brand new.
-
That's not a helpful answer .
Menu , Information, About.
This should show you the image that is on there at the moment. Also, what exactly do you want to backup?
-
the image is: os 4.3.3.3 2021 10 29
image experimentale 2021 10 29
I want to perform a factory backup in case I make a mistake.
Is this necessary? -
can you hepl me thank
-
You don't need to back up the original image; you can download it from the Dreambox website at this link:
It makes sense to perform a backup after you've configured everything you need. You could also perform the backup using a plugin, depending on what you install, or directly from the recovery mode.
-
but in Kiddac tuto i see :
*note before you start a new flash - a reflash clears most things off your box. Make sure you have copies of all important information before continuing.
clines, nlines, iptv details, config files, crons, even picons if you don't want to download them all again. etc. Never rely on the box backing things up. Copy them to a computer first. You have been warned.
/etc/CCcam.cfg (clines)
/etc/tuxbox/config (oscam)
/etc/crons/cronttabs/
/etc/enigma2/[plugin folders]
/etc/enigma2/skin_user_? (if have custom skin overrides)
/usr/keys/ (for some other images and softcams)
/usr/script/
-
Is it essential to install chkroot multiboot it in order to use it only OpenATV 7...?
-
My setup guide is just about installing openatv 7.* as a single image.
Its up to you if you want to enable multiboot. Either way, this is just setup instructions, so 95% of this guide is still true for multiboot.
But to answer your question directly. No. -
Is it essential to install chkroot multiboot it in order to use it only OpenATV 7...?
I think that is question for openatv-7-6-discussion-new-features section not here.
-
You cannot install chkroot multiboot. It is not available to install. It is built in the images that support it.
If you want to use chkroot multiboot, enable it ( turn it on).
If you do not want to use chkroot multiboot, you don't have to do anything.
-
Display More
What is the most complete picture you can recommend ?
What do you mean exactly?
Please just flash ATV 7.51, enable the chkroot multiboot. From the plugin servers, Install Xstreamity, m3uiptv, bouquet maker xtreme, EPGImporter.
Install the secret feed, then install oscam-emu
Can we upgrade to OpenATV version 7.6 or higher at this time?
-
Yes, you can flash/install ATV 7.6.
Why do you think you cannot?
-
in old post
How do you connect the Dreambox 900 to a PC to flash a new image (Wi-Fi, cable, etc.) ?
-
Like you normally do with any receiver.
Receiver connected with ethernet cable to router
PC connected with ethernet or wifi to router.
Download your chosen image
Extract/unzip the image
Restart receiver in recovery mode.
Enter IP address of receiver in your web browser on PC
See here:
-
There are several possible files on the OpenATV download page,
which one should I choose?

-
There are several possible files on the OpenATV download page,
which one should I choose?

Check the last date
-
I've noticed that the updates are very frequent, almost daily. Should they be installed regularly, or where are the changes?
Participate now!
Don’t have an account yet? Register yourself now and be a part of our community!
