There are 36 replies in this Thread which was already clicked 4,821 times. The last Post () by abu baniaz.
On the box where you want to watch the channel (file whitelist_streamrelay in /etc/enigma2/), you need to set the channel to icam use, as well as set on the oscam.conf the line to validate it, and on Webif the proper configuration (on the client box).
On the intermediary server side, you just have nothing to do.
TS
oscam.conf on [global] section
disablecrccws_only_for = 0500:030B00,0E00:000000,1884:000000,098C:000000,098D:000000,09C4:000000,09CD:000000and as well add
[streamrelay]
stream_relay_enabled = 1
stream_emm_enabled = 1
stream_ecm_delay = 0
stream_relay_ctab = 0963,0961,0960,09C4,098D,09CDYou need to have an icam working with your operator (09F0), I think this one is not supported...
As you can see actually the ones known working (ID) are below,
098C:000000
098D:000000
09C4:000000
and this one is SKY IT, that uses a different key of the above ones,
09CD:000000
TS
You need via the menu, of the image, to validate the streamrelay use with every channel that works with icam, and it will show up (the ID of the channel) on the file /etc/enigma2/whitelist_streamrelay
Check also if in your /etc/enigma2/settings file you have the two lines below (these are activated via the OpenWebIf, but you can insert on the settings file yourself, while the box is in "init 4", then restarted with "init 3" after adding).
config.streaming.descramble_client=True
config.streaming.stream_ecm=True
You will also see on the menu, see below,
then Press "menu" button on the channel, and then check if the streamrelay is active or not for that channel
hs5424 - I don't want to get involved in this debate, but I can't help but ask a few questions:
1, Do you have a source of "codes" that will allow you to watch Sky DE stably?
2, Do you have a version of Oscam that can actually work with streamrelay and thus "open" Icam channels?
3, Do you have Oscam configured correctly?
I get the feeling from your debate that you don't have either.
And that's all from my side, and continue to kill your time with empty talk that obviously leads nowhere.
Display Morehs5424 - I don't want to get involved in this debate, but I can't help but ask a few questions:
1, Do you have a source of "codes" that will allow you to watch Sky DE stably?
2, Do you have a version of Oscam that can actually work with streamrelay and thus "open" Icam channels?
3, Do you have Oscam configured correctly?
I get the feeling from your debate that you don't have either.
And that's all from my side, and continue to kill your time with empty talk that obviously leads nowhere.
iCam is built in the actual OSCams, since some months (1 year I think), it just needs to be setup properly, and the table key for UK and DE looks like to be known... so all rely on having configured all properly, and yes to have access to a "valid subscription" smartcard.
TS
The log now on stb parked on SKY.de .
So, user is wrong, anonymous
in user and in the conf in the dvbapi section
But you don't have a reader that supports 098D
How did you set up the N line as a reader?
Connects it
What is the relevance of mentioning the "PC". Do you have a tuner card on the PC? If so, what program are you using on the PC to view the satellite broadcasts?
I put the Nline into my STB like this and it worked.
How you have configured the reader doesn`t look right.
An Nline requires newcamd protocol, not cccam. enable = 0 means its disabled.
You should use this converter > CCcam2OSCam Converter
You are going about this incorrectly in my opinion. The PC has a card reader. Your STBs are connecting to the PC and decrypting the services on that card. When the STBs want to use services that your friend is sharing with you, they should be connecting to your friend.
There may be a way for you to re-share in which case you will need to ensure the reader is in correct format.
As an aside, can you not use the card reader in your receivers instead of keeping the PC on all the time?
You can reshare no problem, there is no special setup on the server, BUT you need to properly setup the image/box with an image compatible with iCam and the oscam adapted to it,
There is configurations to do on various places
- whitelist_streamrelay file in /etc/enigma2 with the ID of the channels (you can activate them via the enigma2 menu while you are on the channel name)
like this,
1:0:19:33AC:3EB:1:C00000:0:0:0:
1:0:19:132F:3EF:1:C00000:0:0:0:
1:0:19:1330:3EF:1:C00000:0:0:0:
1:0:19:1332:3EF:1:C00000:0:0:0:
1:0:19:2B66:3F3:1:C00000:0:0:0:
1:0:1F:307A:3F5:1:C00000:0:0:0:
1:0:19:EF74:3F9:1:C00000:0:0:0:
1:0:19:EF75:3F9:1:C00000:0:0:0:
...
- the oscam.conf needs specific parameters
[global]
disablecrccws_only_for = 0500:030B00,0E00:000000,1884:000000,098C:000000,098D:000000,09C4:000000,09CD:000000
and
[streamrelay]
stream_relay_enabled = 1
stream_emm_enabled = 1
stream_ecm_delay = 0
stream_relay_ctab = 0963,0961,0960,09C4,098D,09CD
- your webif, has to have two things setup, that will then be written into the /etc/enigma2/settings file
config.streaming.descramble_client=True
config.streaming.stream_ecm=True
and naturally the source has the 098D, as well as the oscam you use on the image is supporting it.
TS
Don’t have an account yet? Register yourself now and be a part of our community!
