how restore enigma2

Quote from rami

no no firts read this ok i go to find you the image ok ,you have to go in yhis forum and read the instruction from the admin and moderator

Introduction

1. Prepare a USB stick with 1 partition in FAT32
2. Set the default system boot for [enigma2]
3. Create a directory on the pendrive enigma2
4. Copy the uImage and e2jffs2.img a previously created directory enigma2

Upload Image Enigma2:

1. Turn off receiver
2. Connect the USB stick ready to receiver
2. On Frontpanelu hold [OK] and then turn the power switch
3. After about 5 seconds, the display should appear in the display [FORCE] then you should release the [OK] and press [V +]
4. If everything was done correctly the display flashes [U LD] which means that the image is loaded.
5. After finishing the upload operation should be released shows [Succ], and the receiver will reboot automatically

Display More

after(( i press V+ (for one second) i see force message and nothing happened after 5-6 minutes
thats my problem also U LD never displays

the files that are in are uImage
and e2jffs2.img right?

HRnigma.tar.gz drag and drop to enigma2 directory which includes this two files e2jffs2.img and uImage RIGHT?

give it a try ok_turn on_ five seconds _V+_ force message_wait5-6minutes to force message and let you know

rami i notice that usb not flashes staying red the color (not transfer data?)

is there another way to flash the damned receiver?

yes it comes but first open wizard cleaner i pass it (exit) but nothing i can do because remote controll not working.Any suggestion?

is possible the usb not mount?what else i can think?

after exit from wizard cleaner the panel shows - e and the remote not working.
No i do not have another usb but i remember last time recorded something so it is mounted
Also green display crush after choose to restart exception in python start up code message if helps

ok thank you very much i let you know tomorrow