how restore enigma2
- stilonas
- Thread is marked as Resolved.
-
-
are you sur is this image you have in your usb
-
no no firts read this ok i go to find you the image ok ,you have to go in yhis forum and read the instruction from the admin and moderator
Introduction
1. Prepare a USB stick with 1 partition in FAT32
2. Set the default system boot for [enigma2]
3. Create a directory on the pendrive enigma2
4. Copy the uImage and e2jffs2.img a previously created directory enigma2Upload Image Enigma2:
1. Turn off receiver
2. Connect the USB stick ready to receiver
2. On Frontpanelu hold [OK] and then turn the power switch
3. After about 5 seconds, the display should appear in the display [FORCE] then you should release the [OK] and press [V +]
4. If everything was done correctly the display flashes [U LD] which means that the image is loaded.
5. After finishing the upload operation should be released shows [Succ], and the receiver will reboot automaticallyafter(( i press V+ (for one second) i see force message and nothing happened after 5-6 minutes
thats my problem also U LD never displays -
the files that are in are uImage
and e2jffs2.img right? -
i repeat are you sur you have this image in the usb hr3 enigma2
-
yes 2 archives and directory carpet with enigma 2
-
HRnigma.tar.gz drag and drop to enigma2 directory which includes this two files e2jffs2.img and uImage RIGHT?
-
ok , go try something put in the usb only the 2 archives with no carpet , nothing more only the 2 archive
-
give it a try ok_turn on_ five seconds _V+_ force message_wait5-6minutes to force message and let you know
-
rami i notice that usb not flashes staying red the color (not transfer data?)
-
maybe the usb is faulty ok can you pu on your reciever with no usb and let me no if the image e2 you have before come on your tv
-
is there another way to flash the damned receiver?
-
yes it comes but first open wizard cleaner i pass it (exit) but nothing i can do because remote controll not working.Any suggestion?
-
no just i want check if the reciever is ok , have you read my pm
-
is possible the usb not mount?what else i can think?
-
do you have another usb
-
after exit from wizard cleaner the panel shows - e and the remote not working.
No i do not have another usb but i remember last time recorded something so it is mounted
Also green display crush after choose to restart exception in python start up code message if helps -
try it to format and try it again with directory enigma2 if not try topmorrow another usb
-
ok thank you very much i let you know tomorrow
-
master G
Moved the thread from forum Golden Media 990 CR HD Support to forum Amiko Alien Mini SHD 8900 Spark STI 7111 Support.
Spark STI 7111 Support
Support for ADOH R1, Amiko Alien SHD 8900, Amiko Alien Mini, Goldmaster HD 1200, Golden Media 990 CR HD PVR Spark LX, Golden Media Spark Reloaded, Edision Argus Pingulux, Edision Argus Pingulux Plus, Galaxy Innovations GI S, SAB Unix F+ Solo, Dynavision Spark, Dynavision Spark Plus, Fulan Spark I+, Truman Premier 1+, Samsat Linux 1, Startrack SRT 2020 HD, FullHD FH 2020 HD, Yumatu Spark, Visionnet Hammer, Visionnet Fireball, Superbox S750, Sogno Spark Revolution, Spark STI 7111 Receivers.
Participate now!
Don’t have an account yet? Register yourself now and be a part of our community!