My oscam problems

    • General OSCam
  • andy ray
  • Thread is marked as Resolved.

There are 16 replies in this Thread which was already clicked 1,956 times. The last Post () by andy ray.

    Ive been testing oscam dvapi for short time and my peers keep on dropping off for the life i do not know why when i run with cccam and oscam its perfect here are my current oscam only configs can anyone see what the problem could be


    Oscam onfig



    [global]
    logfile = /dev/null
    cachedelay = 120
    cachedelay = 120
    nice = -1
    preferlocalcards = 1
    dropdups = 1
    lb_mode = 1
    lb_save = 100
    lb_savepath = /usr/local/stat
    fallbacktimeout = 2600


    [monitor]
    appendchaninfo = 1


    [cccam]
    port = xxxx
    reshare = 1
    version = 2.2.1
    nodeid = 7E0DC9C510C51522


    [dvbapi]
    enabled = 1
    user = linuxsatsupport
    boxtype = dreambox
    au = 1
    pmt_mode = 0


    [webif]
    httpport = 14000
    httpuser = xxx
    httppwd = xxx
    httprefresh = 5
    httpallowed = 192.168.0.0-255.255.255.255



    Dvapi


    P: 0963:000000


    # prioritise CAID 0100 with provider 123456


    #P: :000000 # prioritise ECM with provider ID 1234 on
    # on any CAID and service


    #P: 0100 # prioritise CAID 0200


    #P: 0300::9ABC # prioritise CAID 0300 on service 9ABC only


    #M: 0400 0500:123456 # map CAID 0400 to provider ID 123456 with
    # CAID 0500


    #D: 0600 200 # wait 200 ms before writing CW for CAID 0600


    #I: :654321 # ignore provider ID 654321 for every CAID and
    # service


    #I: 0 # ignore every CAID that was not handled before


    #L: 0700 8e # ECM length for CAID 0700 to 8e (hexadecimal)



    Oscam Server


    [reader]
    label = ***uk
    protocol = pcsc
    device = 0
    services =
    fallback = 1
    caid = 0963
    ecmwhitelist = 0963:3E,42,44,45,47,4E,4F,53,54,61,62,67,68,69,6A,6B,6D,6F,71,72,73,77,78,79,7A,7C,7D,7E,80,8B
    detect = cd
    mhz = 500
    cardmhz = 500
    group = 1
    emmcache = 1,3,2
    blockemm-unknown = 1
    blockemm-g = 1
    saveemm-u = 1
    saveemm-s = 1
    blocknano = all



    Oscam User


    [account]
    user = linuxsatsupport
    group = 1
    caid = 0963
    ident = 0963:000000
    au = ***UK
    monlevel = 0

    for dvbapi to work you need an entry in oscam.conf for dvbapi and an account in oscam.user that relates to the dvbapi entry in oscam.conf. Try changing yours to the following;


    oscam.conf

    Code
    [dvbapi]
enabled = 1
au = 1
boxtype = dreambox
user = dvbapi_dreambox


    oscam.user


    Code
    [account]
user = dvbapi_dreambox
pwd =
group = 1
monlevel = 0
au = 1


    au = 1 sends updates to all cards, so if you have more than one card and each are in different groups then as far as I can see you can add extra groups, although I have never tried it with more than one card.


    add peer user accounts and readers as normal.

    If I take a while to respond, you can see why.....


    :red:

    Thanks for the reply musogeek i already had a dvapi entry in oscam.conf it was just above webif in my original post and i had it in oscam,user but it looks slightly different to the format you have written,will your reply and the way its formatted help with the dropping issue

    not sure if it would be related but it is worth a try:thumbsup:


    btw i just noticed that you are blocking all EMMs on your reader entry so your card won't update. Keep unknown and global blocked but allow the other 2 and it should update EMMs as long as you are leaving it on a channel that your card clears.

    If I take a while to respond, you can see why.....


    :red:

    Cheers unique and shared are unticked already you may of seen
    saveemm-u = 1
    saveemm-s = 1


    lets hope the new info helps

    Quote from andy ray

    Cheers unique and shared are unticked already you may of seen
    saveemm-u = 1
    saveemm-s = 1


    yep my bad lol - didn't notice that you had them on save rather than block. Should still update without saving them. Think the save option is to a file so would still update without this.


    You have got your reader set as fallback? Usually this option wouldn't be set - any reason why it is set as a fallback reader?

    If I take a while to respond, you can see why.....


    :red:

    Quote from AfyB

    If you have only one reader, why are you using load balancer?


    not sure if he said he has one reader - he has only posted the config for one reader:smile:


    Loadbalancer isn't just for physical - it is used for virtual as well

    If I take a while to respond, you can see why.....


    :red:

    I was told to use Loadbalancer so i would always get the peer with the lowest ecm time to open the channel

    This appears to still be happening any futher advice on this

    Thanks Master G I will try that to see if it helps the annoying thing is the issue is not there with oscam/cccam cheers

    This is still happening even after i changed my configs the strange thing is it does not seem to affect my two receivers only my other peers very strange indeed ive given up and have gone back to oscam/cccam until i can get it to work properly

    I thought i got it under control but it still the same so ive reverted back to oscam and cccam until i can fix this

    Anyone willing to offer any more advice or help in anyway to get this dropping issue fixed cheers

OSCam Support Forum

Configs, discussion, downloads and guides for OSCam Softcam.

Participate now!

Don’t have an account yet? Register yourself now and be a part of our community!

Register Yourself Login