Posts by ILM16
-
-
Very odd, it just started working! I don't really know what to say.
-
sounds like your card is now paired back to original box with the new system
Might be better to mention the box model you updated in (Original *** one) for others to be better help mate tooIt's an old pace digibox.
why would you put it back in sly box? there are loades off posts on here about it.your card is now paired hard luck
I've been doing that every time it needs updating, didn't realise otherwise - as I said I've been away for a few weeks.
go back to sly box setting details if your serial number has a letter at the end or you extra line at the bottom that says receiver id your card its done with cs
Just checked, serial number of sly box is just numbers, no letters. I don't see any thing about receiver ID.
-
I've been away for a few weeks, got back to see my Sly card said no entitlments on OSCAM. I inserted it back in to the original box, got an update and channels started clearing fine on the original Sly box.
I put it back in to my VU but it still says no entitlements, I subscribe to BT Sport SD, Premier Sports, ESPN and BoxNation - all clear fine on Sly but not on VU.
I read that BT Sport HD isn't working properly with OSCAM but SD should be fine, so I am a bit lost!
No changes in my config files whatsoever..
-
Restarted the box and it worked, you don't happen to know any up to date channel lists with asian as a favs group.
-
Followed AJ's thread but the OpenBox keeps saying it's been successful but then it says 'No Channels' when trying to exit the menus.
Using an S9.
-
Wow! What a mess OSCAM is. It's basically a lose-lose situation.
As my card has very few services, how would I go about implementing your first suggestion, as you say 'this doesn't work if you use it in the reader entry for your card'. It's like the opposite, in oscam.services I define what I do get already.
-
Sorry for any confusion, what is happening is my peers are clearing every channel through me via my other readers. I'm looking through musogeeks' thread now but I don't really see any solutions.
Ten Below - I already use that, it may not be configured correctly though.
Code
Display More[reader] label = ***_card protocol = internal device = /dev/sci1 services = premboxbt,freesat caid = 0963 detect = cd mhz = 500 cardmhz = 500 ident = 0963:000000 group = 1 emmcache = 1,3,2 blockemm-unknown = 1 blockemm-g = 1 lb_weight = 101 -
Hi! For some reason OSCAM is making it seem as though my Sly card is full packed. Basically my peers clear everything through me, though I have only certain channels and they say it comes up as hop 1.
I decided to check for myself, I went to my friend's house, gave him a line and he cleared every channel through me on hop1! This is overloading right now and it makes it look as if I am card faking.
Which OSCAM configs would be need to be seen here?
-
Sorted! I needed to change .conf with the right port, rookie mistake!!
-
To be fair with FTV, you're only getting:
4Music, Channel 5 HD, LFC TV, Motors TV, Sony & Sony Movies (plus timeshift)
So managing their SIDs wouldn't be that difficult.
-
Hmmm it says closed, but it's saying closed for all my open ports!
-
I've got that already. It's just in OSCAM web panel all users are offline (all accounts are enables however)
-
Very odd, I did a fresh install on my VU+ as it was getting buggy. I added all my OSCAM settings back slowly, updating any issues. Now all my users exist but are 'offline'.
I did change my IP on the box from .104 to .103, but I've made the required changes on my router to open up for sharing.
Unless I've made some obvious mistake, I can't see any problems:
.conf
Code
Display More[global] logfile = /dev/null cachedelay = 120 nice = -1 preferlocalcards = 1 saveinithistory = 1 lb_mode = 1 [monitor] hideclient_to = 15 monlevel = 4 appendchaninfo = 1 [cccam] port = 12000 reshare = 1 version = 2.1.3 stealth = 1 [dvbapi] enabled = 1 au = 1 boxtype = dreambox user = vudvbapi [webif] httpport = 8888 httpuser = root httppwd = httprefresh = 5 httpallowed = 0.0.0.0-255.255.255.255.dvbapi
CodeP: 0963:000000.server
Code
Display More[reader] label = ***_card protocol = internal device = /dev/sci1 caid = 0963 detect = cd mhz = 500 cardmhz = 500 ident = 0963:000000 group = 1 emmcache = 1,3,2 blockemm-unknown = 1 blockemm-g = 1 lb_weight = 101.user
Code
Display More[account] user = vudvbapi pwd = group = 1,2 au = 1 [account] user=TEST pwd=TEST group=1 cccmaxhops=2 cccignorereshare=0Thanks!
-
When you say a virgin set up what do you mean exactly?
-
Cheers for the help mate, everything helps. Very odd as it's been fine for ages, never had an issue. Definitely looks like the cams though.
-
Actually might not just be OSCAM, I tried CCcam standalone 2.3.0, same issue.
The thing is the softcam isn't even 'ticked' to start on reboot, it's literally if it's been used the box doesn't want to work on reboot.
-
Around £300 from Mr Mister on WoS.
I think it's OSCAM you know.
I reflashed again, rebooted and it worked.
I then configured the turner, rebooted and it worked.
I then downloaded a channel list, rebooted and it worked.
I then installed the OSCAM IPK, rebooted and it worked.
I then started OSCAM, rebooted and it did not work. -
I bought it two years ago and I'm certain it's an original.
-
Yep ViX, not a backup, no settings restored at all.
