Hi
I have a VU+ duo and I want it to connect to a dm8000.
I use oscam on the dreambox and mgcamd on the vu+duo.
I have to cards viasat and canal digital.
both cards connects to the server, but I only the viasat card decodes.
Can anyone help me.
eberg
Post your cofigs please, without these it is impossible to know what is wrong.
Hi
DM8000
oscam.server
[reader]
Label = Viasat
Protocol = internal
Detect = CD
Device = /dev/sci0
EMMCache = 1,3,2
Group = 1
Fallback = 0
CAID = 093E
ident = 093E:000000
BoxID = xxxxxxxx
# Internal reader upper (boxes with two readers)
#-----------------------------------------------
[reader]
label = Canal Digital
protocol = internal
detect = cd
device = /dev/sci1
enable = 1
group = 1
CAID = 0B00
ident = 0B00:000000
emmcache = 1,3,2
#boxid = 00000000
# Smargo (mousemode)
# Set enable to 1 if connected to the box, 0 if not used
#--------------------------------------------------------
[reader]
label = smargo
protocol = mouse
device = /dev/ttyUSB0
enable = 0
group = 1
emmcache = 1,3,2
#boxid = 00000000
oscam.conf
[global]
nice = -1
waitforcards = 0
preferlocalcards = 1
saveinithistory = 1
logfile = /tmp/oscam.log
nice = -1
preferlocalcards = 1
saveinithistory = 1
resolvegethostbyname = 1
# logging
#pidfile = /var/run/oscam.pid
logfile = /var/log/oscam.log
usrfile = /var/log/oscamuser.log
cwlogdir = /var/log/cw.log
maxlogsize = 1000
[monitor]
port = 0
nocrypt =
aulow = 30
hideclient_to = 15
monlevel = 3
appendchaninfo = 0
[newcamd]
port = 50000@093E:000000;50001@0B00:000000
key = 0102030405060708091011121314
allowed =
keepalive = 0
mgclient = 0
# web interface
#--------------
[webif]
httpport = 8080
httpuser = oscam
httppwd =
httpallowed = 127.0.0.1,10.0.0.0-10.255.255.255,172.16.0.0-172.31.255.255,192.168.0.0-192.168.255.255
httprefresh = 10
# protocols
#----------
[dvbapi]
enabled = 1
au = 1
boxtype = dreambox
user = oscam
oscam.user
[account]
user = bedroom
pwd = vu+duo
group = 1,2
uniq = 1
monlevel = 3
au = 1
caid =
cccmaxhops = -1
cccreshare = -10
on VU+duo
newcamd.list
CWS_KEEPALIVE = 300
CWS_INCOMING_PORT = 21000
CWS= 192.168.0.142 50000 bedroom vu+duo 01 02 03 04 05 06 07 08 09 10 11 12 13 14 lan oscam2
CWS= 192.168.0.142 50001 bedroom vu+duo 01 02 03 04 05 06 07 08 09 10 11 12 13 14 lan oscam2
mg_cfg
# EMM messages
# 00 don't show any EMMs (default)
# 01 show only valid EMMs
# 02 show valid and bad EMMs with complete data display
M: { 01 }
# ECM messages
# 00 don't show anything about ecm
# 01 normal mode, show pids processed, decoded ecm and cw
# 02 verbose mode, show valid and bad ECMs with data
C: { 01 }
# AU
# 00 disable, no emm pids processed
# 01 enable, emm pids always processed for soft-au and shared cards
# 02 auto, emm started only if channel cant be decoded
# 03 process emm pids for network cards update only
A: { 01 }
# key update (sum 01 or 02 with 04)
# 01 update only new keys, default setting
# 02 update all keys (used for valid PMK checking)
# 04 enable TPS au
# + tps SID, which pmt pid contains au pid
U: { 01 } 0x12c0
# config files folder (softcam, autoroll, ignore/priority)
# 00 files in /var/keys
# 01 files in /tmp
T: { 00 }
# network mode, use summ for several clients
# 00 no network (default)
# 01 newcamd netclient
# 02 radegast netclient
# 04 camd3 netclient
# 08 gbox netclient
G: { 01 }
# network retry, use summ for several options
# 00 disable
# 01 retry every new ecm
# 02 try to connect to offline shares every Q: seconds
# 04 try to detect and fast reconnect to lost (and not used atm) server
# + XX messages number and YY seconds to reconnect
# mg will reconnect to server, if no answer to last XX ecm/keepalive or
# if no answer for last ecm or keepalive sent for YY seconds
# set to 0 to disable
N: { 07 } 5 30
# network ecm timeout in seconds
K: { 05 }
# newcamd dead routes connect retry, sec
Q: { 600 }
# network shares priority
# 00 gbox, newcamd, radegast, camd3 (default)
# 01 camd3, radegast, newcamd, gbox
# 02 newcamd, camd3, gbox, radegast
P: { 00 }
# on screen display type
# 00 No OSD (default)
# 01 neutrino
# 02 enigma
# 03 relook
# + user password for http auth
O: { 00 } username password
# on screen display Options, summ of:
# 01 show emu ecm
# 02 show network shares messages
# 04 show decoding failed / fta
# 08 show emm keys update
# + web port to use for osd
S: { 03 } 80
# Log option, summ of:
# 00 off
# 01 network udp log
# 02 log to console
# 04 file, appended ! delete it by yourself, before it eat all your hdd
# + IP udp-port log-file-name
L: { 03 } 172.16.1.1 28007 /tmp/mgcamd.log
# keep ecm cache, seconds
# every cache entry takes 28 bytes, so 24h cache will take *only* 240-400kb of memory,
# for openbox/elanvision users with remote shares make sense to set it higher than default value,
# to not hammer cards while timeshifting or playing crypted recordings.
E: { 15 }
# cache option, summ of:
# 00 Off (default)
# 01 Ecm pids cache, store pids used to decode in /tmp/ca_cache.list at exit, load at startup, same syntax as restore.list
# 02 Ecm data cache, remember CW for (E:) time
# 04 Emm cache for network cards, do not resend the same emm twice, cache not cleared until restart
H: { 07 }
# reread files, summ of:
# 00 No (default)
# 01 reread config file on channel change (including priority and ignore, but not replace/cache)
# 02 reread SoftCam.Key on channel change
# 04 reread SoftCam.Key if file changed
R: { 00 }
# debug, summ of
# 00 off (default)
# 01 debug ecm
# 02 debug emm
# 04 debug network ecm
# 08 debug network emm
# 16 debug network login
# 32 show mem/cpu stats every 1 min
# 64 add timestamp to log messages
D: { 00 }
# box type
# 00 autodetect, change only if you think wrong type detected.
# 01 dbox2
# 02 dreambox
# 03 triple-dragon
# 04 relook
# 05 openbox
B: { 00 }In oscam.conf activate mgclient and keep alive.
[newcamd]
port = 50000@093E:000000;50001@0B00:000000
key = 0102030405060708091011121314
allowed =
keepalive =[COLOR='#FF0000'] 1[/COLOR]
mgclient =[COLOR='#FF0000'] 1[/COLOR]You may also need to change the box type in mg_cfg to dreambox B: { 02 }.
# box type
# 00 autodetect, change only if you think wrong type detected.
# 01 dbox2
# 02 dreambox
# 03 triple-dragon
# 04 relook
# 05 openbox
[COLOR='#FF0000']B: { 02 }[/COLOR]The smargo dosnt have any Caid or Ident defined for Viasat.
Both readers are in the same group, change the smargo to group = 2.
The smargo needs enable = 1 to be activated.
You may also need to add the Boxid = to decode all channels for Viasat.
[reader]
label = Canal Digital
protocol = internal
detect = cd
device = /dev/sci1
enable = 1
group = 1
CAID = 0B00
ident = 0B00:000000
emmcache = 1,3,2
#boxid = 00000000
# Smargo (mousemode)
# Set enable to 1 if connected to the box, 0 if not used
#--------------------------------------------------------
[reader]
label = smargo
protocol = mouse
device = /dev/ttyUSB0
enable = [COLOR='#FF0000']1[/COLOR]
group = [COLOR='#FF0000']2[/COLOR]
emmcache = 1,3,2
#boxid = 00000000
caid = [COLOR='#FF0000']093E[/COLOR]
ident = [COLOR='#FF0000']093E:000000[/COLOR]I would also give each card its own [account] in oscam.user, with separate user, pass and group.
Post any errors from your oscam log.
Display MoreIn oscam.conf activate mgclient and keep alive.
Code[newcamd] port = 50000@093E:000000;50001@0B00:000000 key = 0102030405060708091011121314 allowed = keepalive =[COLOR='#FF0000'] 1[/COLOR] mgclient =[COLOR='#FF0000'] 1[/COLOR]
You may also need to change the box type in mg_cfg to dreambox B: { 02 }.
Code# box type # 00 autodetect, change only if you think wrong type detected. # 01 dbox2 # 02 dreambox # 03 triple-dragon # 04 relook # 05 openbox [COLOR='#FF0000']B: { 02 }[/COLOR]
Both readers are in the same group, change the smargo to group = 2.
CodeDisplay More[reader] label = Canal Digital protocol = internal detect = cd device = /dev/sci1 enable = 1 group = 1 CAID = 0B00 ident = 0B00:000000 emmcache = 1,3,2 #boxid = 00000000 # Smargo (mousemode) # Set enable to 1 if connected to the box, 0 if not used #-------------------------------------------------------- [reader] label = smargo protocol = mouse device = /dev/ttyUSB0 enable = 0 group = [COLOR='#FF0000']2[/COLOR] emmcache = 1,3,2 #boxid = 00000000
I would also give each card its own [account] in oscam.user, with separate user, pass and group.
Post any errors from your oscam log.
Hi
the smargo reader is not in use, but i can change group on the upper reader to 2?
Reberg
Hi
2012/09/08 12:16:04 2CD474B0 c anonymous (0B00&000000/05E4/8D:2CDF): found (226 ms) by canal_digital (of 1 avail 1)
2012/09/08 12:16:14 2CD474B0 c anonymous (0B00&000000/05E4/8D:8526): found (226 ms) by canal_digital (of 1 avail 1)
2012/09/08 12:16:24 2CD474B0 c anonymous (0B00&000000/05E4/8D:6F46): found (228 ms) by canal_digital (of 1 avail 1)
2012/09/08 12:16:35 2CD474B0 c anonymous (0B00&000000/05E4/8D:8289): found (226 ms) by canal_digital (of 1 avail 1)
2012/09/08 12:16:45 2CD474B0 c anonymous (0B00&000000/05E4/8D:89A4): found (225 ms) by canal_digital (of 1 avail 1)
2012/09/08 12:16:55 2CD474B0 c anonymous (0B00&000000/05E4/8D:679A): found (227 ms) by canal_digital (of 1 avail 1)
2012/09/08 12:17:05 2CD474B0 c anonymous (0B00&000000/05E4/8D:2F5D): found (225 ms) by canal_digital (of 1 avail 1)
2012/09/08 12:17:15 2CD474B0 c anonymous (0B00&000000/05E4/8D:29FF): found (226 ms) by canal_digital (of 1 avail 1)
2012/09/08 12:17:24 2E6FF4B0 c client connected to 50000 port
2012/09/08 12:17:24 2EEFF4B0 c client connected to 50001 port
2012/09/08 12:17:24 2E6FF4B0 c client(2E6FF4B0) duplicate user 'bedroom' from 192.168.0.128 set to fake (uniq=1)
2012/09/08 12:17:24 2E6FF4B0 c encrypted newcamd:50000-client 192.168.0.128 granted (bedroom, au(auto)=viasat)
2012/09/08 12:17:24 2E6FF4B0 c user bedroom authenticated successfully (mgcamd)
2012/09/08 12:17:24 2E6FF4B0 c AU enabled for user bedroom on reader viasat
2012/09/08 12:17:24 2EEFF4B0 c client(2EEFF4B0) duplicate user 'bedroom' from 192.168.0.128 set to fake (uniq=1)
2012/09/08 12:17:24 2EEFF4B0 c encrypted newcamd:50001-client 192.168.0.128 granted (bedroom, au(auto)=canal_digital)
2012/09/08 12:17:24 2EEFF4B0 c user bedroom authenticated successfully (mgcamd)
2012/09/08 12:17:24 2EEFF4B0 c AU enabled for user bedroom on reader canal_digital
2012/09/08 12:17:25 2EEFF4B0 c Connection closed to client
2012/09/08 12:17:25 2EEFF4B0 c bedroom disconnected from 192.168.0.128
2012/09/08 12:17:25 2E6FF4B0 c Connection closed to client
2012/09/08 12:17:25 2EEFF4B0 c thread 2EEFF4B0 ended!
2012/09/08 12:17:25 2E6FF4B0 c bedroom disconnected from 192.168.0.128
2012/09/08 12:17:25 2E6FF4B0 c thread 2E6FF4B0 ended!
2012/09/08 12:17:25 2CD474B0 c anonymous (0B00&000000/05E4/8D:DCAA): found (227 ms) by canal_digital (of 1 avail 1)
2012/09/08 12:17:35 2CD474B0 c anonymous (0B00&000000/05E4/8D:148D): found (235 ms) by canal_digital (of 1 avail 1)
You should have something like this for Viasat in upper internal reader.
[reader]
label = VIASAT
protocol = internal
device = /dev/sci0
detect = cd
enable = 1
group = 2
emmcache = 1,3,2
#boxid =
caid = 093E
ident = 093E:000000
[account]
user = [COLOR='#FF0000']bedroom1[/COLOR]
pwd = [COLOR='#FF0000']vu+duo1[/COLOR]
group = 2
caid = 093E
ident = 093E:000000
au = VIASATnewcamd.list
Display MoreHi
2012/09/08 12:16:04 2CD474B0 c anonymous (0B00&000000/05E4/8D:2CDF): found (226 ms) by canal_digital (of 1 avail 1)
2012/09/08 12:16:14 2CD474B0 c anonymous (0B00&000000/05E4/8D:8526): found (226 ms) by canal_digital (of 1 avail 1)
2012/09/08 12:16:24 2CD474B0 c anonymous (0B00&000000/05E4/8D:6F46): found (228 ms) by canal_digital (of 1 avail 1)
2012/09/08 12:16:35 2CD474B0 c anonymous (0B00&000000/05E4/8D:8289): found (226 ms) by canal_digital (of 1 avail 1)
2012/09/08 12:16:45 2CD474B0 c anonymous (0B00&000000/05E4/8D:89A4): found (225 ms) by canal_digital (of 1 avail 1)
2012/09/08 12:16:55 2CD474B0 c anonymous (0B00&000000/05E4/8D:679A): found (227 ms) by canal_digital (of 1 avail 1)
2012/09/08 12:17:05 2CD474B0 c anonymous (0B00&000000/05E4/8D:2F5D): found (225 ms) by canal_digital (of 1 avail 1)
2012/09/08 12:17:15 2CD474B0 c anonymous (0B00&000000/05E4/8D:29FF): found (226 ms) by canal_digital (of 1 avail 1)
2012/09/08 12:17:24 2E6FF4B0 c client connected to 50000 port
2012/09/08 12:17:24 2EEFF4B0 c client connected to 50001 port
2012/09/08 12:17:24 2E6FF4B0 c client(2E6FF4B0) duplicate user 'bedroom' from 192.168.0.128 set to fake (uniq=1)
2012/09/08 12:17:24 2E6FF4B0 c encrypted newcamd:50000-client 192.168.0.128 granted (bedroom, au(auto)=viasat)
2012/09/08 12:17:24 2E6FF4B0 c user bedroom authenticated successfully (mgcamd)
2012/09/08 12:17:24 2E6FF4B0 c AU enabled for user bedroom on reader viasat
2012/09/08 12:17:24 2EEFF4B0 c client(2EEFF4B0) duplicate user 'bedroom' from 192.168.0.128 set to fake (uniq=1)
2012/09/08 12:17:24 2EEFF4B0 c encrypted newcamd:50001-client 192.168.0.128 granted (bedroom, au(auto)=canal_digital)
2012/09/08 12:17:24 2EEFF4B0 c user bedroom authenticated successfully (mgcamd)
2012/09/08 12:17:24 2EEFF4B0 c AU enabled for user bedroom on reader canal_digital
2012/09/08 12:17:25 2EEFF4B0 c Connection closed to client
2012/09/08 12:17:25 2EEFF4B0 c bedroom disconnected from 192.168.0.128
2012/09/08 12:17:25 2E6FF4B0 c Connection closed to client
2012/09/08 12:17:25 2EEFF4B0 c thread 2EEFF4B0 ended!
2012/09/08 12:17:25 2E6FF4B0 c bedroom disconnected from 192.168.0.128
2012/09/08 12:17:25 2E6FF4B0 c thread 2E6FF4B0 ended!
2012/09/08 12:17:25 2CD474B0 c anonymous (0B00&000000/05E4/8D:DCAA): found (227 ms) by canal_digital (of 1 avail 1)
2012/09/08 12:17:35 2CD474B0 c anonymous (0B00&000000/05E4/8D:148D): found (235 ms) by canal_digital (of 1 avail 1)
You are getting the error " duplicate user 'bedroom " because you need to have a separate [account] for each card.
Hi
here is the log
nothing works now :)
2012/09/08 12:50:13 2DD474B0 c client connected to 50000 port
2012/09/08 12:50:13 2D5474B0 c client connected to 50001 port
2012/09/08 12:50:14 2DD474B0 c user bedroom is providing a wrong password (mgcamd)
2012/09/08 12:50:14 2DD474B0 c user bedroom is trying to connect but doesnt exist ! (mgcamd)
2012/09/08 12:50:14 2D5474B0 c encrypted newcamd:50001-client 192.168.0.128 granted (bedroom, au=viasat)
2012/09/08 12:50:14 2DD474B0 c plain newcamd-client 192.168.0.128 rejected (no such user)
2012/09/08 12:50:14 2D5474B0 c user bedroom authenticated successfully (mgcamd)
2012/09/08 12:50:14 2D5474B0 c AU wont be used on this port -> disable AU
2012/09/08 12:50:14 2DD474B0 c thread 2DD474B0 ended!
2012/09/08 12:50:14 2D5474B0 c Connection closed to client
2012/09/08 12:50:14 2D5474B0 c bedroom disconnected from 192.168.0.128
2012/09/08 12:50:14 2D5474B0 c thread 2D5474B0 ended!
2012/09/08 12:50:15 2CD474B0 c anonymous (0B00&000000/05E4/8D:E67C): found (227 ms) by canal_digital (of 1 avail 1)
2012/09/08 12:50:25 2CD474B0 c anonymous (0B00&000000/05E4/8D:ABB5): found (227 ms) by canal_digital (of 1 avail 1)
2012/09/08 12:50:34 2CD474B0 c anonymous (0B00&000000/05E4/8D:DDF0): found (227 ms) by canal_digital (of 1 avail 1)
2012/09/08 12:50:44 2CD474B0 c anonymous (0B00&000000/05E4/8D:D1A3): found (226 ms) by canal_digital (of 1 avail 1)
here is my oscam.user now
[account]
user = bedroom
pwd = vu+duo
group = 1
uniq = 1
monlevel = 3
au = Viasat
caid =
cccmaxhops = -1
cccreshare = -10
[account]
user = bedroom1
pwd = vu+duo1
group = 2
uniq = 1
monlevel = 3
au = Canal Digital
caid = 0B00
ident = 0B00:000000
cccmaxhops = -1
cccreshare = -10
oscam.server
# Internal reader lower (or if the box has only one reader)
#----------------------------------------------------------
[reader]
Label = Viasat
Protocol = internal
Detect = CD
Device = /dev/sci0
EMMCache = 1,3,2
Group = 1
Fallback = 0
CAID = 093E
ident = 093E:000000
BoxID = xxxxxxxx
# Internal reader upper (boxes with two readers)
#-----------------------------------------------
[reader]
label = Canal Digital
protocol = internal
detect = cd
device = /dev/sci1
enable = 1
group = 2
CAID = 0B00
ident = 0B00:000000
emmcache = 1,3,2
#boxid = 00000000
# Smargo (mousemode)
# Set enable to 1 if connected to the box, 0 if not used
#--------------------------------------------------------
[reader]
label = smargo
protocol = mouse
device = /dev/ttyUSB0
enable = 0
group = 1
emmcache = 1,3,2
#boxid = 00000000
latest log
2012/09/08 13:04:52 2DD474B0 c client connected to 50000 port
2012/09/08 13:04:52 2D5474B0 c client connected to 50001 port
2012/09/08 13:04:52 2DD474B0 c encrypted newcamd:50000-client 192.168.0.128 granted (bedroom, au=viasat)
2012/09/08 13:04:52 2DD474B0 c user bedroom authenticated successfully (mgcamd)
2012/09/08 13:04:52 2DD474B0 c AU enabled for user bedroom on reader viasat
2012/09/08 13:04:52 2D5474B0 c encrypted newcamd:50001-client 192.168.0.128 granted (bedroom1, au(auto)=0)
2012/09/08 13:04:52 2D5474B0 c user bedroom1 authenticated successfully (mgcamd)
2012/09/08 13:04:52 2D5474B0 c AU disabled for user bedroom1
2012/09/08 13:04:53 2DD474B0 c Connection closed to client
2012/09/08 13:04:53 2DD474B0 c bedroom disconnected from 192.168.0.128
2012/09/08 13:04:53 2DD474B0 c thread 2DD474B0 ended!
2012/09/08 13:04:53 2D5474B0 c Connection closed to client
2012/09/08 13:04:53 2D5474B0 c bedroom1 disconnected from 192.168.0.128
2012/09/08 13:04:53 2D5474B0 c thread 2D5474B0 ended!
2012/09/08 13:04:55 2CD474B0 c anonymous (0B00&000000/05E4/8D:0B9F): found (227 ms) by canal_digital (of 1 avail 1)
2012/09/08 13:05:05 2CD474B0 c anonymous (0B00&000000/05E4/8D:5076): found (226 ms) by canal_digital (of 1 avail 1)
hi
latest log
2012/09/08 13:04:52 2DD474B0 c client connected to 50000 port
2012/09/08 13:04:52 2D5474B0 c client connected to 50001 port
2012/09/08 13:04:52 2DD474B0 c encrypted newcamd:50000-client 192.168.0.128 granted (bedroom, au=viasat)
2012/09/08 13:04:52 2DD474B0 c user bedroom authenticated successfully (mgcamd)
2012/09/08 13:04:52 2DD474B0 c AU enabled for user bedroom on reader viasat
2012/09/08 13:04:52 2D5474B0 c encrypted newcamd:50001-client 192.168.0.128 granted (bedroom1, au(auto)=0)
2012/09/08 13:04:52 2D5474B0 c user bedroom1 authenticated successfully (mgcamd)
2012/09/08 13:04:52 2D5474B0 c AU disabled for user bedroom1
2012/09/08 13:04:53 2DD474B0 c Connection closed to client
2012/09/08 13:04:53 2DD474B0 c bedroom disconnected from 192.168.0.128
2012/09/08 13:04:53 2DD474B0 c thread 2DD474B0 ended!
2012/09/08 13:04:53 2D5474B0 c Connection closed to client
2012/09/08 13:04:53 2D5474B0 c bedroom1 disconnected from 192.168.0.128
2012/09/08 13:04:53 2D5474B0 c thread 2D5474B0 ended!
2012/09/08 13:04:55 2CD474B0 c anonymous (0B00&000000/05E4/8D:0B9F): found (227 ms) by canal_digital (of 1 avail 1)
2012/09/08 13:05:05 2CD474B0 c anonymous (0B00&000000/05E4/8D:5076): found (226 ms) by canal_digital (of 1 avail 1)
Try these configs buddy.
oscam.conf
[global]
nice = -1
waitforcards = 0
preferlocalcards = 1
saveinithistory = 1
logfile = /tmp/oscam.log
nice = -1
preferlocalcards = 1
saveinithistory = 1
resolvegethostbyname = 1
# logging
#pidfile = /var/run/oscam.pid
logfile = /var/log/oscam.log
usrfile = /var/log/oscamuser.log
cwlogdir = /var/log/cw.log
maxlogsize = 1000
[monitor]
port = 0
nocrypt =
aulow = 30
hideclient_to = 15
monlevel = 3
appendchaninfo = 0
[newcamd]
port = 50000@093E:000000;50001@0B00:000000
key = 0102030405060708091011121314
allowed =
keepalive = 1
[dvbapi]
enabled = 1
user = linuxsatsupport
boxtype = dreambox
au = 1
# web interface
#--------------
[webif]
httpport = 8080
httpuser = oscam
httppwd =
httpallowed = 127.0.0.1,10.0.0.0-10.255.255.255,172.16.0.0-172.31.255.255,192.168.0.0-192.168.255.255
httprefresh = 10oscam.server
[reader]
Label = Viasat
Protocol = internal
Detect = CD
Device = /dev/sci0
EMMCache = 1,3,2
Group = 1
CAID = 093E
ident = 093E:000000
BoxID = xxxxxxxx
[reader]
label = Canal Digital
protocol = internal
detect = cd
device = /dev/sci1
group = 2
CAID = 0B00
ident = 0B00:000000
emmcache = 1,3,2
#boxid = 00000000oscam.dvbapi
oscam.user
[account]
user = linuxsatsupport
group = 1,2
keepalive = 1
[account]
user = bedroom1
pwd = vu+duo1
group = 1
caid = 093E
ident = 093E:000000
au = Viasat
keepalive = 1
[account]
user = bedroom
pwd = vu+duo
group = 2
caid = 0B00
ident = 0B00:000000
au = Canal Digital
keepalive = 1newcamd.list
nothing (:
2012/09/08 14:03:41 2CD474B0 c anonymous (093E&000000/0456/88:701A): found (268 ms) by viasat (of 1 avail 1)
2012/09/08 14:03:44 2DEFF4B0 c client connected to 50000 port
2012/09/08 14:03:44 2D6FF4B0 c client connected to 50001 port
2012/09/08 14:03:44 2DEFF4B0 c encrypted newcamd:50000-client 192.168.0.128 granted (bedroom1, au=viasat)
2012/09/08 14:03:44 2DEFF4B0 c user bedroom1 authenticated successfully (mgcamd)
2012/09/08 14:03:44 2DEFF4B0 c AU enabled for user bedroom1 on reader viasat
2012/09/08 14:03:44 2D6FF4B0 c encrypted newcamd:50001-client 192.168.0.128 granted (bedroom, au(auto)=0)
2012/09/08 14:03:44 2D6FF4B0 c user bedroom authenticated successfully (mgcamd)
2012/09/08 14:03:44 2D6FF4B0 c AU disabled for user bedroom
2012/09/08 14:03:51 2CD474B0 c anonymous (093E&000000/0456/88:3BFC): found (277 ms) by viasat (of 1 avail 1)
2012/09/08 14:04:01 2CD474B0 c anonymous (093E&000000/0456/88:F833): found (267 ms) by viasat (of 1 avail 1)
2012/09/08 14:04:05 2DEFF4B0 c Connection closed to client
2012/09/08 14:04:05 2D6FF4B0 c Connection closed to client
2012/09/08 14:04:05 2DEFF4B0 c bedroom1 disconnected from 192.168.0.128
2012/09/08 14:04:05 2D6FF4B0 c bedroom disconnected from 192.168.0.128
2012/09/08 14:04:05 2DEFF4B0 c thread 2DEFF4B0 ended!
2012/09/08 14:04:05 2D6FF4B0 c thread 2D6FF4B0 ended!
I also get this when I start mgcamd in telnet
[newcamd] 192.168.0.142:50001 new card: 0B00 000000.
[newcamd] 192.168.0.142:50000 new card: 093E 000000.
got 130 cmd 9F
/dev/dvb/card0/demux0 error 2: No such file or directory
By the way.. thank u so far
reberg
You will have problems while using dvbapi and mgclient at the same time, if you use dvbapi to view channels on dm8000 remove mgclient = 1 from oscam.conf so the Vu+duo can connect.
I am not sure what dvbapi does??
2012/09/08 14:23:54 2CD474B0 c dvbapi: Start descrambling PID #1 (CAID: 093E) 1
2012/09/08 14:24:01 2CD474B0 c anonymous (093E&000000/0456/88:D0AE): found (268 ms) by viasat (of 1 avail 1)
2012/09/08 14:24:11 2CD474B0 c anonymous (093E&000000/0456/88:C1BB): found (268 ms) by viasat (of 1 avail 1)
2012/09/08 14:24:12 2D5474B0 c client connected to 50000 port
2012/09/08 14:24:12 2DD474B0 c client connected to 50001 port
2012/09/08 14:24:13 2D5474B0 c encrypted newcamd:50000-client 192.168.0.128 granted (bedroom1, au=viasat)
2012/09/08 14:24:13 2D5474B0 c user bedroom1 authenticated successfully (mgcamd)
2012/09/08 14:24:13 2D5474B0 c AU enabled for user bedroom1 on reader viasat
2012/09/08 14:24:13 2DD474B0 c encrypted newcamd:50001-client 192.168.0.128 granted (bedroom, au(auto)=0)
2012/09/08 14:24:13 2DD474B0 c user bedroom authenticated successfully (mgcamd)
2012/09/08 14:24:13 2DD474B0 c AU disabled for user bedroom
2012/09/08 14:24:14 2D5474B0 c Connection closed to client
2012/09/08 14:24:14 2DD474B0 c Connection closed to client
2012/09/08 14:24:14 2D5474B0 c bedroom1 disconnected from 192.168.0.128
2012/09/08 14:24:14 2DD474B0 c bedroom disconnected from 192.168.0.128
2012/09/08 14:24:14 2DD474B0 c thread 2DD474B0 ended!
2012/09/08 14:24:14 2D5474B0 c thread 2D5474B0 ended!
2012/09/08 14:24:21 2CD474B0 c anonymous (093E&000000/0456/88:02FB): found (270 ms) by viasat (of 1 avail 1)
2012/09/08 14:24:31 2CD474B0 c anonymous (093E&000000/0456/88:1256): found (267 ms) by viasat (of 1 avail 1)
2012/09/08 14:24:41 2CD474B0 c anonymous (093E&000000/0456/88:6AD2): found (268 ms) by viasat (of 1 avail 1)
2012/09/08 14:24:51 2CD474B0 c anonymous (093E&000000/0456/88:C472): found (267 ms) by viasat (of 1 avail 1)
The dvbapi will decode/view channels and update your card in oscam without the need for another protocol like CCcam or newcamd.
What are you using to decode channels on dm8000 ?
If no channels are clearing on dm8000 we will need to edit the configs and add an [account] for dvbapi, thats why you see anonymous in the log, the configs i posted will only connect the DUO and will have to be altered so you can view on dm8000 as well.
I am noy sure what u mean about decoding :)
when i started i got to se the channes on the viasat card, but never on the canal digital. but now i cant se anything
can u make an account for dvbapi?
Decode basically means view channels, Yes, i will edit the configs above for dvbapi.
hi
still got this message
got 130 cmd 9F
/dev/dvb/card0/demux0 error 2: No such file or directory
Don’t have an account yet? Register yourself now and be a part of our community!
