trouble to add a locale client to Oscam

I have got my dm800se up and running with viasat and cd nordic but i have trouble to get my other box to access it, its a 7025 running cccam 2,14

my config are like this

c line in cccam

C: 192.168.0.122 34100 user2 pass2 yes

oscam.config

[global]
nice = -1
WaitForCards = 1
ClientTimeout = 5
CacheDelay = 120
logfile = /usr/local/etc/oscam.log

[newcamd]
Key = 0102030405060708091011121314
Port = 34100@093E:000000

[webif]
httpport = 8888
httpuser = oscam
httppwd = oscam
httprefresh = 10
httpallowed = 127.0.0.1,192.168.0.0-192.168.255.255

# protocols
#----------
[dvbapi]
enabled = 1
au = 1
boxtype = dreambox
user = oscam

oscam server

[reader]
label = lower
protocol = internal
Detect = CD
device = /dev/sci0
Mhz = 358
enable = 1
group = 1
emmcache = 1,3,2
boxid = 0--------------
CAID = 093E

[reader]
label = upper
protocol = internal
Detect = CD
device = /dev/sci1
Mhz = 358
enable = 1
group = 1
emmcache = 1,3,2
CAID = 0B00

oscam user

[account]
user = oscam
pwd = oscam
group = 1
monlevel = 4
au = 1

[account]
user = user2
pwd = pass2
group = 1
monlevel = 4
au = 1

hope someone can help me her cause im totaly lost

i have tried with this setup her on my dm800 http://linuxsat-support.com/os…et-no-cw-2.html#post69949 but while i was looking i found config files both in usr/keys and in var/tuxbox wich one off these directory is the rigth one

my n line isnt activated so it looks lie this N: 127.0.0.1 10000 dummy dummy 01 02 03 04 05 06 07 08 09 10 11 12 13 14 1 1 but if i made it like this N: 127.0.0.1 34100 user2 pass2 01 02 03 04 05 06 07 08 09 10 11 12 13 14 1 1 would that be something

no the 122 id the 7025 wich runs cccam 2,14 107 is the server wich runs oscam 1,0 but i edit it like this N: 192.168.0.107 34100 user2 pass2 01 02 03 04 05 06 07 08 09 10 11 12 13 14 1

still my web if looks like this

2AAC6840 s 0 root 0 0 127.0.0.1 0 server 09.09.12 23:28:45 00:02:51 0000:0000 00:02:51 OK
2B5474B0 h 1 root 0 0 127.0.0.1 0 monitor 09.09.12 23:28:45 00:02:51 0000:0000 00:00:00 OK
Readers
2BD474B0 r 1 lower -1 0 127.0.0.1 0 internal 09.09.12 23:28:45 00:02:51 0000:0000 no data 00:02:47 CARDOK
2C5474B0 r 2 upper -2 0 127.0.0.1 0 internal 09.09.12 23:28:45 00:02:51 0B00:05DD no data 00:00:09 CARDOK
Clients
c 1 linuxsatsupport 0 0 0.0.0.0 0 dvbapi 09.09.12 23:28:45 00:02:51 0B00:05DD by upper 00:00:09 OK

2012/09/09 23:28:49 2BD474B0 r [videoguard2-reader] tier: 00f6, expiry date: 2012/10/26-00:00:00
2012/09/09 23:28:49 2BD474B0 r [videoguard2-reader] tier: 00fb, expiry date: 2012/10/26-00:00:00
2012/09/09 23:28:50 2BD474B0 r [videoguard2-reader] tier: 00fe, expiry date: 2012/10/26-00:00:00
2012/09/09 23:28:50 2BD474B0 r [videoguard2-reader] tier: 00ff, expiry date: 2012/10/26-00:00:00
2012/09/09 23:28:50 2BD474B0 r [videoguard2-reader] tier: 0105, expiry date: 2012/10/26-00:00:00
2012/09/09 23:28:50 2BD474B0 r [videoguard2-reader] tier: 010b, expiry date: 2012/10/26-00:00:00
2012/09/09 23:28:50 2BD474B0 r [videoguard2-reader] tier: 0118, expiry date: 2012/10/26-00:00:00
2012/09/09 23:28:50 2BD474B0 r [videoguard2-reader] tier: 011f, expiry date: 2012/10/26-00:00:00
2012/09/09 23:28:50 2BD474B0 r [videoguard2-reader] tier: 0130, expiry date: 2012/10/26-00:00:00
2012/09/09 23:28:50 2BD474B0 r [videoguard2-reader] tier: 013a, expiry date: 2012/10/26-00:00:00
2012/09/09 23:28:50 2BD474B0 r [videoguard2-reader] tier: 013f, expiry date: 2012/10/26-00:00:00

should not the dvbapi have that 122 adrsess

i realy appreciate you helping with this

it still says offline but the one config i have one my first post are those ok cause then i put those lines in again,on the 7025 should i use both the c and n line or just the n line? and con fig files witch are in the keys directory shale i remove them to?

the one config i have one my first post are those ok cause then i put those lines in again,on the 7025 should i use both the c and n line or just the n line? and con fig files witch are in the keys directory shale i remove them to?when i log in to cccam web if on 7025 it says 1 server connection but no cards

i took and reinstalled my 800se now with black hole instead and was on ts panel and looked for a cam package with oscam/cccam but i was i doubt witch one of those combinations i could use with viasat and canal digital , can any one please give me a tips witch on who is most suitable

No one?????

thanks al lot ,Gonna try that Dreamboxuk image tonigth :-)

its an 800se,Sorry for that;-)

Hello again,have got it up and running now with a balckhole image and oscam/cccam with a slickly modified config files that "Master G" made for Redberg" Thanks a lot to masterG for those ,they are actually an up and running config for viasatCanal D. Nordic ;-)
but now a have another question. Can someone please tell how to add another user from a no-ip adress. I have looked around here in the forum but haven't found it, i cant get cccam web if up on my server just oscam web if. I have 2 card in my server and each card is a group 1,2

[account]
user = linuxsatsupport
pwd =
group = 1,2
keepalive = 1

[account]
user = pass
pwd = passw
group = 1
au = viasat
caid = 093E
ident = 093E:000000
keepalive = 1

[account]
user = pass1
pwd = passw1
group = 2
caid = 0B00
ident = 0B00:000000
keepalive = 1

can some one please show how a script for a new user would look like so it cold connect from a c line in cccam