Hello have a dreambox 800 with no power - changed power supply but no luck, only ethernet leds come on
Any help appreciated
Dreambox 800 clone - No power
- todali
- Closed
- Thread is marked as Resolved.
-
-
Firstly have you tried it with another plug
Colleagues think that when you came to the breakout connector for voltage.
Remove the cover from the receivers and see in the corner connector for power.
Take the connector-to do when reciver not naponu.clean connector.
Take a piece of wire reciver Plug-in power supply and contacts the legs where the connector and keeps going until the reciver does not work.
Then quench reciver from power. go back connector back into place and turn on your normal reciver.
Here's my dm 500hd before and turns to resolving my problem.If you have the same symptoms, then follow these steps and make sure you do not stick and do not touch anything except the contact on the blade where it goes konektor.Ili master carries you to the center
All you're doing at your own risk
-
Problem turned out to be power supply first one tried only 600mA not enough juice
Upped to 3.5amp and problem solved
Participate now!
Don’t have an account yet? Register yourself now and be a part of our community!