Hi All,
Appreciate very much on the configurations of AD-Teknik AB Multiprogrammer 3.6 USB to work with ubuntu.
Tried the below settings with my pc server but could not get it to work. AD-Teknik is not recognised by server.
[reader]
label = reader10
protocol = mp35
detect = CD
device = /dev/ttyUSB1
group = 10
emmcache = 1,3,2
services = services10
caid = xxxx
Thanks.
Had change device = 003:002 from /dev/ttyUSB1 but still cannot power on the reader.
[reader]
label = xxxx
description = AD TEKNIK
protocol = mouse
detect = CD
device = 005:003
group = 1
emmcache = 1,3,2
#services = services10
ident = xxxx:000000
emmcache = 1,1,7
22/09/2012 21:26:32 0 s Cannot open file "/usr/local/etc/oscam.services" (errno=2 No such file or directory)
22/09/2012 21:26:32 0 s userdb reloaded: 2 accounts loaded, 0 expired, 0 disabled
22/09/2012 21:26:32 0 s signal handling initialized (type=sysv)
22/09/2012 21:26:32 0 s can't open file "/usr/local/etc/oscam.srvid" (err=2 No such file or directory), no service-id's loaded
22/09/2012 21:26:32 0 s can't open file "/usr/local/etc/oscam.tiers" (err=2 No such file or directory), no tier-id's loaded
22/09/2012 21:26:32 0 s can't open file "/usr/local/etc/oscam.provid" (err=2 No such file or directory), no provids's loaded
22/09/2012 21:26:32 0 s can't open file "/usr/local/etc/oscam.ird" (errno=2 No such file or directory) i***** guessing not loaded
22/09/2012 21:26:32 0 s can't open whitelist file /usr/local/etc/oscam.whitelist
22/09/2012 21:26:32 0 s can't open cacheex-matcher file /usr/local/etc/oscam.cacheex
22/09/2012 21:26:32 0 s Starting listener 0
22/09/2012 21:26:32 0 s monitor: disabled
22/09/2012 21:26:32 0 s Starting listener 0
22/09/2012 21:26:32 0 s camd35: disabled
22/09/2012 21:26:32 0 s Starting listener 0
22/09/2012 21:26:32 0 s cs378x: disabled
22/09/2012 21:26:32 0 s Starting listener 0
22/09/2012 21:26:32 0 s newcamd: initialized (fd=4, port=34000, ip=192.168.xxx.xxx, crypted)
22/09/2012 21:26:32 0 s -> CAID: xxxx PROVID: 000000
22/09/2012 21:26:32 0 s Starting listener 0
22/09/2012 21:26:32 0 s pandora: disabled
22/09/2012 21:26:32 0 s Starting listener 0
22/09/2012 21:26:32 0 s csp: disabled
22/09/2012 21:26:32 0 s Starting listener 0
22/09/2012 21:26:32 0 s radegast: disabled
22/09/2012 21:26:32 0 s starting thread http
22/09/2012 21:26:32 0 s http thread started
22/09/2012 21:26:32 0 s starting thread reader check
22/09/2012 21:26:32 0 s reader check thread started
22/09/2012 21:26:32 0 s starting thread check
22/09/2012 21:26:32 0 s check thread started
22/09/2012 21:26:32 0 s xxxx [mouse] creating thread for device 005:003
22/09/2012 21:26:32 0 s loadbalancer: can't read from file /tmp/.oscam/stat
22/09/2012 21:26:32 0 s waiting for local card init
22/09/2012 21:26:32 9D1DB88 r xxxx [mouse] ERROR: Opening device 005:003 (errno=2 No such file or directory)
22/09/2012 21:26:32 9D1DB88 r xxxx [mouse] Cannot open device: 005:003
22/09/2012 21:26:32 9D23EB8 h HTTP Server listening on port 8888
22/09/2012 21:27:32 9D1DB88 r xxxx [mouse] ERROR: Opening device 005:003 (errno=2 No such file or directory)
22/09/2012 21:27:32 9D1DB88 r xxxx [mouse] Cannot open device: 005:003
22/09/2012 21:28:32 9D1DB88 r xxxx [mouse] ERROR: Opening device 005:003 (errno=2 No such file or directory)
22/09/2012 21:28:32 9D1DB88 r xxxx [mouse] Cannot open device: 005:003
22/09/2012 21:29:32 9D1DB88 r xxxx [mouse] ERROR: Opening device 005:003 (errno=2 No such file or directory)
22/09/2012 21:29:32 9D1DB88 r xxxx [mouse] Cannot open device: 005:003
22/09/2012 21:30:32 9D1DB88 r xxxx [mouse] ERROR: Opening device 005:003 (errno=2 No such file or directory)
22/09/2012 21:30:32 9D1DB88 r xxxx [mouse] Cannot open device: 005:003
22/09/2012 21:31:32 9D1DB88 r xxxx [mouse] ERROR: Opening device 005:003 (errno=2 No such file or directory)
22/09/2012 21:31:32 9D1DB88 r xxxx [mouse] Cannot open device: 005:003
after doin a lsusb, the device was show as bus 005 device 003
Any kind member please assit to guide so that I can have my ad teknik card reader working.
Try this:
change device = 005:003 to device = /dev/ttyUSB0
Try this:
change device = 005:003 to device = /dev/ttyUSB0
HI Bipat003,
Thanks.
Yes i had change accordingly but sometimes it works and lot of times it doesn't. Everytime i reboot the server, it will not be able to read the ad teknik.
26/09/2012 22:15:07 0 s adteknik [mp35] creating thread for device /dev/ttyUSB0
26/09/2012 22:15:07 0 s loadbalancer: can't read from file /tmp/.oscam/stat
26/09/2012 22:15:07 0 s waiting for local card init
26/09/2012 22:15:07 86FD248 h HTTP Server listening on port 8888
26/09/2012 22:15:09 86F58E8 r adteknik [mp35] ERROR: MP35_Init returns error
26/09/2012 22:15:11 86F58E8 r adteknik [mp35] Cannot open device: /dev/ttyUSB0
Any guide please?
Hi,
Anyone can assist as even in Debian 6, I still get the same result.
Thanks.
Are you only getting the problem when you reboot server?
I have a smargo and had a similar problem when i restart server (not Oscam)
It seemed to be that the server would re-allocate the USB ports hence on restart the ID changed?
Have you got a powered Hub...i have found that with the USB hub anytime i restart server it seems to keep Smargo connected?
If you restart Oscam in the Webif it should keep your reader connected! I don't really find the need to restart my server and only do it when i can't remember the last time it was done lol
Also... it could be possible that CCcam takes ownership of the reader when started first..
There is nothing to solve that, other than starting oscam first.. to take ownership..
Then start CC-Cam after..
Hi mrgmx & CapNCook.
Thanks.
Everytime I start the server I will get the below. The USB port is not reallocated.
26/09/2012 22:15:07 0 s adteknik [mp35] creating thread for device /dev/ttyUSB0
26/09/2012 22:15:07 0 s loadbalancer: can't read from file /tmp/.oscam/stat
26/09/2012 22:15:07 0 s waiting for local card init
26/09/2012 22:15:07 86FD248 h HTTP Server listening on port 8888
26/09/2012 22:15:09 86F58E8 r adteknik [mp35] ERROR: MP35_Init returns error
26/09/2012 22:15:11 86F58E8 r adteknik [mp35] Cannot open device: /dev/ttyUSB0
How do I make oscam start first and the cccam?
Hi All,
Any expert can help on the below:-
2012/10/27 21:21:32 0 s client max. idle=120 sec, debug level=0, filter_sensitive=1
2012/10/27 21:21:32 0 s max. logsize=10 Kb, loghistorysize=4096 bytes
2012/10/27 21:21:32 0 s client timeout=5000 ms, fallback timeout=2500 ms, cache delay=120 ms
2012/10/27 21:21:32 0 s ERROR: Cannot open file "/usr/local/etc/oscam.services" (errno=2 No such file or directory)
2012/10/27 21:21:32 0 s userdb reloaded: 2 accounts loaded, 0 expired, 0 disabled
2012/10/27 21:21:32 0 s signal handling initialized (type=sysv)
2012/10/27 21:21:32 0 s ERROR: Cannot open file "/usr/local/etc/oscam.srvid" (errno=2 No such file or directory)
2012/10/27 21:21:32 0 s ERROR: Cannot open file "/usr/local/etc/oscam.tiers" (errno=2 No such file or directory)
2012/10/27 21:21:32 0 s ERROR: Cannot open file "/usr/local/etc/oscam.provid" (errno=2 No such file or directory)
2012/10/27 21:21:32 0 s ERROR: Cannot open file "/usr/local/etc/oscam.guess" (errno=2 No such file or directory)
2012/10/27 21:21:32 0 s ERROR: Cannot open file "/usr/local/etc/oscam.ird" (errno=2 No such file or directory)
2012/10/27 21:21:32 0 s ERROR: Cannot open file "/usr/local/etc/oscam.whitelist" (errno=2 No such file or directory)
2012/10/27 21:21:32 0 s ERROR: Cannot open file "/usr/local/etc/oscam.cacheex" (errno=2 No such file or directory)
2012/10/27 21:21:32 0 s Starting listener 0
2012/10/27 21:21:32 0 s monitor: disabled
2012/10/27 21:21:32 0 s Starting listener 0
2012/10/27 21:21:32 0 s camd35: disabled
2012/10/27 21:21:32 0 s Starting listener 0
2012/10/27 21:21:32 0 s cs378x: disabled
2012/10/27 21:21:32 0 s Starting listener 0
2012/10/27 21:21:32 0 s newcamd: initialized (fd=5, port=10002, crypted)
2012/10/27 21:21:32 0 s -> CAID: XXXX PROVID: 000000
2012/10/27 21:21:32 0 s Starting listener 0
2012/10/27 21:21:32 0 s pandora: disabled
2012/10/27 21:21:32 0 s Starting listener 0
2012/10/27 21:21:32 0 s csp: disabled
2012/10/27 21:21:32 0 s Starting listener 0
2012/10/27 21:21:32 0 s radegast: disabled
2012/10/27 21:21:32 0 s starting thread http
2012/10/27 21:21:32 0 s http thread started
2012/10/27 21:21:32 0 s starting thread reader check
2012/10/27 21:21:32 0 s reader check thread started
2012/10/27 21:21:32 0 s starting thread check
2012/10/27 21:21:32 0 s check thread started
2012/10/27 21:21:32 0 s adteknik3.5 [mp35] creating thread for device /dev/ttyUSB0
2012/10/27 21:21:32 0 s loadbalancer: can't read from file /tmp/.oscam/stat
2012/10/27 21:21:32 0 s anti cascading disabled
2012/10/27 21:21:32 885BE30 h HTTP Server listening on port 8888
2012/10/27 21:21:32 885D678 c client connected to 10002 port
2012/10/27 21:21:32 885D678 c encrypted newcamd:10002-client 127.0.0.1 granted (test1, au=off)
2012/10/27 21:21:32 885D678 c user test1 authenticated successfully (CCcam)
2012/10/27 21:21:32 885D678 c AU disabled for user test1
2012/10/27 21:21:35 8856180 r adteknik3.5 [mp35] ERROR: MP35_Init returns error
2012/10/27 21:21:36 8856180 r adteknik3.5 [mp35] Cannot open device: /dev/ttyUSB0
2012/10/27 21:22:39 8856180 r adteknik3.5 [mp35] ERROR: MP35_Init returns error
2012/10/27 21:22:40 8856180 r adteknik3.5 [mp35] Cannot open device: /dev/ttyUSB0
2012/10/27 21:23:43 8856180 r adteknik3.5 [mp35] ERROR: MP35_Init returns error
2012/10/27 21:23:45 8856180 r adteknik3.5 [mp35] Cannot open device: /dev/ttyUSB0
Cannot get adteknik 3.5 usb card reader to run.
Reader settings as below:-
label = adteknik3.5
protocol = mp35
device = /dev/ttyUSB0
Caid = xxxx
detect = cd
group = 1
emmcache = 1,3,2
Thanks.
Hi Experts,
Any kind assistance is very much appreciate.
I am using Oscam 7855 to read my NDS card with the Adteknik MP3.5 usb reader but I always get error activating card.
please find log and settings as below:-
2012/11/06 20:43:53 0 s max. logsize=10 Kb, loghistorysize=4096 bytes
2012/11/06 20:43:53 0 s client timeout=5000 ms, fallback timeout=2500 ms, cache delay=0 ms
2012/11/06 20:43:53 0 s ERROR: Cannot open file "/usr/local/etc/oscam.services" (errno=2 No such file or directory)
2012/11/06 20:43:53 0 s userdb reloaded: 1 accounts loaded, 0 expired, 0 disabled
2012/11/06 20:43:53 0 s signal handling initialized (type=sysv)
2012/11/06 20:43:53 0 s ERROR: Cannot open file "/usr/local/etc/oscam.srvid" (errno=2 No such file or directory)
2012/11/06 20:43:53 0 s ERROR: Cannot open file "/usr/local/etc/oscam.tiers" (errno=2 No such file or directory)
2012/11/06 20:43:53 0 s ERROR: Cannot open file "/usr/local/etc/oscam.provid" (errno=2 No such file or directory)
2012/11/06 20:43:53 0 s ERROR: Cannot open file "/usr/local/etc/oscam.guess" (errno=2 No such file or directory)
2012/11/06 20:43:53 0 s ERROR: Cannot open file "/usr/local/etc/oscam.ird" (errno=2 No such file or directory)
2012/11/06 20:43:53 0 s ERROR: Cannot open file "/usr/local/etc/oscam.whitelist" (errno=2 No such file or directory)
2012/11/06 20:43:53 0 s ERROR: Cannot open file "/usr/local/etc/oscam.cacheex" (errno=2 No such file or directory)
2012/11/06 20:43:53 0 s Starting listener 0
2012/11/06 20:43:53 0 s monitor: disabled
2012/11/06 20:43:53 0 s Starting listener 0
2012/11/06 20:43:53 0 s camd35: disabled
2012/11/06 20:43:53 0 s Starting listener 0
2012/11/06 20:43:53 0 s cs378x: disabled
2012/11/06 20:43:53 0 s Starting listener 0
2012/11/06 20:43:53 0 s newcamd: initialized (fd=4, port=10000, crypted)
2012/11/06 20:43:53 0 s -> CAID: xxxx PROVID: 000000
2012/11/06 20:43:53 0 s Starting listener 0
2012/11/06 20:43:53 0 s pandora: disabled
2012/11/06 20:43:53 0 s Starting listener 0
2012/11/06 20:43:53 0 s csp: disabled
2012/11/06 20:43:53 0 s Starting listener 0
2012/11/06 20:43:53 0 s radegast: disabled
2012/11/06 20:43:53 0 s starting thread http
2012/11/06 20:43:53 0 s http thread started
2012/11/06 20:43:53 0 s starting thread reader check
2012/11/06 20:43:53 0 s reader check thread started
2012/11/06 20:43:53 0 s starting thread check
2012/11/06 20:43:53 8341AC0 h HTTP Server listening on port 8888
2012/11/06 20:43:53 0 s check thread started
2012/11/06 20:43:53 0 s mysmartcardreader [mp35] creating thread for device /dev/ttyUSB0
2012/11/06 20:43:53 0 s loadbalancer: can't read from file /tmp/.oscam/stat
2012/11/06 20:43:53 0 s waiting for local card init
2012/11/06 20:43:53 8344FB0 r mysmartcardreader [mp35] mp35_reader_init: started
2012/11/06 20:43:57 8344FB0 r mysmartcardreader [mp35] mp35_product_info: MP3.5 - FW:04.03
2012/11/06 20:43:57 8344FB0 r mysmartcardreader [mp35] mp35_reader_init: Using oscillator 1 (3.57MHz)
2012/11/06 20:43:58 8344FB0 r mysmartcardreader [mp35] Reader initialized (device=/dev/ttyUSB0, detect=cd, mhz=357, cardmhz=357)
2012/11/06 20:43:58 8344FB0 r mysmartcardreader [mp35] card detected
2012/11/06 20:44:09 8344FB0 r mysmartcardreader [mp35] Error activating card.
2012/11/06 20:44:31 0 --- Skipped 2 duplicated log lines ---
2012/11/06 20:44:31 8344FB0 r mysmartcardreader [mp35] card initializing error
2012/11/06 20:44:31 0 s init for all local cards done
2012/11/06 20:44:31 0 s anti cascading disabled
[reader]
label = mysmartcardreader
protocol = mp35
device = /dev/ttyUSB0
caid = xxxx
ident = xxxx:000000
group = 1
Thanks.
