Ubuntu amd.32-Bit 12.04 - Automated Oscam/CCcam 2.1.3 Install Package And AD-Teknik

There are 10 replies in this Thread which was already clicked 4,003 times. The last Post () by satastr.

    Hi All,


    Appreciate very much on the configurations of AD-Teknik AB Multiprogrammer 3.6 USB to work with ubuntu.


    Tried the below settings with my pc server but could not get it to work. AD-Teknik is not recognised by server.


    [reader]
    label = reader10
    protocol = mp35
    detect = CD
    device = /dev/ttyUSB1
    group = 10
    emmcache = 1,3,2
    services = services10
    caid = xxxx


    Thanks.

    The BEST FORUM for ALL SAT matters. Any reason that you should not be here???:85:

    Had change device = 003:002 from /dev/ttyUSB1 but still cannot power on the reader.

    The BEST FORUM for ALL SAT matters. Any reason that you should not be here???:85:

    [reader]
    label = xxxx
    description = AD TEKNIK
    protocol = mouse
    detect = CD
    device = 005:003
    group = 1
    emmcache = 1,3,2
    #services = services10
    ident = xxxx:000000
    emmcache = 1,1,7



    22/09/2012 21:26:32 0 s Cannot open file "/usr/local/etc/oscam.services" (errno=2 No such file or directory)
    22/09/2012 21:26:32 0 s userdb reloaded: 2 accounts loaded, 0 expired, 0 disabled
    22/09/2012 21:26:32 0 s signal handling initialized (type=sysv)
    22/09/2012 21:26:32 0 s can't open file "/usr/local/etc/oscam.srvid" (err=2 No such file or directory), no service-id's loaded
    22/09/2012 21:26:32 0 s can't open file "/usr/local/etc/oscam.tiers" (err=2 No such file or directory), no tier-id's loaded
    22/09/2012 21:26:32 0 s can't open file "/usr/local/etc/oscam.provid" (err=2 No such file or directory), no provids's loaded
    22/09/2012 21:26:32 0 s can't open file "/usr/local/etc/oscam.ird" (errno=2 No such file or directory) i***** guessing not loaded
    22/09/2012 21:26:32 0 s can't open whitelist file /usr/local/etc/oscam.whitelist
    22/09/2012 21:26:32 0 s can't open cacheex-matcher file /usr/local/etc/oscam.cacheex
    22/09/2012 21:26:32 0 s Starting listener 0
    22/09/2012 21:26:32 0 s monitor: disabled
    22/09/2012 21:26:32 0 s Starting listener 0
    22/09/2012 21:26:32 0 s camd35: disabled
    22/09/2012 21:26:32 0 s Starting listener 0
    22/09/2012 21:26:32 0 s cs378x: disabled


    22/09/2012 21:26:32 0 s Starting listener 0
    22/09/2012 21:26:32 0 s newcamd: initialized (fd=4, port=34000, ip=192.168.xxx.xxx, crypted)
    22/09/2012 21:26:32 0 s -> CAID: xxxx PROVID: 000000
    22/09/2012 21:26:32 0 s Starting listener 0
    22/09/2012 21:26:32 0 s pandora: disabled
    22/09/2012 21:26:32 0 s Starting listener 0
    22/09/2012 21:26:32 0 s csp: disabled
    22/09/2012 21:26:32 0 s Starting listener 0
    22/09/2012 21:26:32 0 s radegast: disabled
    22/09/2012 21:26:32 0 s starting thread http
    22/09/2012 21:26:32 0 s http thread started
    22/09/2012 21:26:32 0 s starting thread reader check
    22/09/2012 21:26:32 0 s reader check thread started
    22/09/2012 21:26:32 0 s starting thread check
    22/09/2012 21:26:32 0 s check thread started
    22/09/2012 21:26:32 0 s xxxx [mouse] creating thread for device 005:003
    22/09/2012 21:26:32 0 s loadbalancer: can't read from file /tmp/.oscam/stat
    22/09/2012 21:26:32 0 s waiting for local card init
    22/09/2012 21:26:32 9D1DB88 r xxxx [mouse] ERROR: Opening device 005:003 (errno=2 No such file or directory)
    22/09/2012 21:26:32 9D1DB88 r xxxx [mouse] Cannot open device: 005:003
    22/09/2012 21:26:32 9D23EB8 h HTTP Server listening on port 8888
    22/09/2012 21:27:32 9D1DB88 r xxxx [mouse] ERROR: Opening device 005:003 (errno=2 No such file or directory)
    22/09/2012 21:27:32 9D1DB88 r xxxx [mouse] Cannot open device: 005:003
    22/09/2012 21:28:32 9D1DB88 r xxxx [mouse] ERROR: Opening device 005:003 (errno=2 No such file or directory)
    22/09/2012 21:28:32 9D1DB88 r xxxx [mouse] Cannot open device: 005:003
    22/09/2012 21:29:32 9D1DB88 r xxxx [mouse] ERROR: Opening device 005:003 (errno=2 No such file or directory)
    22/09/2012 21:29:32 9D1DB88 r xxxx [mouse] Cannot open device: 005:003
    22/09/2012 21:30:32 9D1DB88 r xxxx [mouse] ERROR: Opening device 005:003 (errno=2 No such file or directory)
    22/09/2012 21:30:32 9D1DB88 r xxxx [mouse] Cannot open device: 005:003
    22/09/2012 21:31:32 9D1DB88 r xxxx [mouse] ERROR: Opening device 005:003 (errno=2 No such file or directory)
    22/09/2012 21:31:32 9D1DB88 r xxxx [mouse] Cannot open device: 005:003


    after doin a lsusb, the device was show as bus 005 device 003


    Any kind member please assit to guide so that I can have my ad teknik card reader working.

    The BEST FORUM for ALL SAT matters. Any reason that you should not be here???:85:

    Quote from BIPAT003

    Try this:
    change device = 005:003 to device = /dev/ttyUSB0


    HI Bipat003,


    Thanks.


    Yes i had change accordingly but sometimes it works and lot of times it doesn't. Everytime i reboot the server, it will not be able to read the ad teknik.


    26/09/2012 22:15:07 0 s adteknik [mp35] creating thread for device /dev/ttyUSB0
    26/09/2012 22:15:07 0 s loadbalancer: can't read from file /tmp/.oscam/stat
    26/09/2012 22:15:07 0 s waiting for local card init
    26/09/2012 22:15:07 86FD248 h HTTP Server listening on port 8888
    26/09/2012 22:15:09 86F58E8 r adteknik [mp35] ERROR: MP35_Init returns error
    26/09/2012 22:15:11 86F58E8 r adteknik [mp35] Cannot open device: /dev/ttyUSB0


    Any guide please?

    The BEST FORUM for ALL SAT matters. Any reason that you should not be here???:85:

    Hi,


    Anyone can assist as even in Debian 6, I still get the same result.


    Thanks.

    The BEST FORUM for ALL SAT matters. Any reason that you should not be here???:85:

    Are you only getting the problem when you reboot server?


    I have a smargo and had a similar problem when i restart server (not Oscam)


    It seemed to be that the server would re-allocate the USB ports hence on restart the ID changed?


    Have you got a powered Hub...i have found that with the USB hub anytime i restart server it seems to keep Smargo connected?


    If you restart Oscam in the Webif it should keep your reader connected! I don't really find the need to restart my server and only do it when i can't remember the last time it was done lol



    lssdalogo.png



    "Don't Gain The World & Lose Your Soul, Wisdom Is Better Than Silver Or Gold"
    “Herb is the healing of a nation, alcohol is the destruction”



    Also... it could be possible that CCcam takes ownership of the reader when started first..


    There is nothing to solve that, other than starting oscam first.. to take ownership..


    Then start CC-Cam after..

    Hi mrgmx & CapNCook.


    Thanks.


    Everytime I start the server I will get the below. The USB port is not reallocated.


    26/09/2012 22:15:07 0 s adteknik [mp35] creating thread for device /dev/ttyUSB0
    26/09/2012 22:15:07 0 s loadbalancer: can't read from file /tmp/.oscam/stat
    26/09/2012 22:15:07 0 s waiting for local card init
    26/09/2012 22:15:07 86FD248 h HTTP Server listening on port 8888
    26/09/2012 22:15:09 86F58E8 r adteknik [mp35] ERROR: MP35_Init returns error
    26/09/2012 22:15:11 86F58E8 r adteknik [mp35] Cannot open device: /dev/ttyUSB0


    How do I make oscam start first and the cccam?

    The BEST FORUM for ALL SAT matters. Any reason that you should not be here???:85:

    Hi All,


    Any expert can help on the below:-


    2012/10/27 21:21:32 0 s client max. idle=120 sec, debug level=0, filter_sensitive=1
    2012/10/27 21:21:32 0 s max. logsize=10 Kb, loghistorysize=4096 bytes
    2012/10/27 21:21:32 0 s client timeout=5000 ms, fallback timeout=2500 ms, cache delay=120 ms
    2012/10/27 21:21:32 0 s ERROR: Cannot open file "/usr/local/etc/oscam.services" (errno=2 No such file or directory)
    2012/10/27 21:21:32 0 s userdb reloaded: 2 accounts loaded, 0 expired, 0 disabled
    2012/10/27 21:21:32 0 s signal handling initialized (type=sysv)
    2012/10/27 21:21:32 0 s ERROR: Cannot open file "/usr/local/etc/oscam.srvid" (errno=2 No such file or directory)
    2012/10/27 21:21:32 0 s ERROR: Cannot open file "/usr/local/etc/oscam.tiers" (errno=2 No such file or directory)
    2012/10/27 21:21:32 0 s ERROR: Cannot open file "/usr/local/etc/oscam.provid" (errno=2 No such file or directory)
    2012/10/27 21:21:32 0 s ERROR: Cannot open file "/usr/local/etc/oscam.guess" (errno=2 No such file or directory)
    2012/10/27 21:21:32 0 s ERROR: Cannot open file "/usr/local/etc/oscam.ird" (errno=2 No such file or directory)
    2012/10/27 21:21:32 0 s ERROR: Cannot open file "/usr/local/etc/oscam.whitelist" (errno=2 No such file or directory)
    2012/10/27 21:21:32 0 s ERROR: Cannot open file "/usr/local/etc/oscam.cacheex" (errno=2 No such file or directory)
    2012/10/27 21:21:32 0 s Starting listener 0
    2012/10/27 21:21:32 0 s monitor: disabled
    2012/10/27 21:21:32 0 s Starting listener 0
    2012/10/27 21:21:32 0 s camd35: disabled
    2012/10/27 21:21:32 0 s Starting listener 0
    2012/10/27 21:21:32 0 s cs378x: disabled
    2012/10/27 21:21:32 0 s Starting listener 0
    2012/10/27 21:21:32 0 s newcamd: initialized (fd=5, port=10002, crypted)
    2012/10/27 21:21:32 0 s -> CAID: XXXX PROVID: 000000
    2012/10/27 21:21:32 0 s Starting listener 0
    2012/10/27 21:21:32 0 s pandora: disabled
    2012/10/27 21:21:32 0 s Starting listener 0
    2012/10/27 21:21:32 0 s csp: disabled
    2012/10/27 21:21:32 0 s Starting listener 0
    2012/10/27 21:21:32 0 s radegast: disabled
    2012/10/27 21:21:32 0 s starting thread http
    2012/10/27 21:21:32 0 s http thread started
    2012/10/27 21:21:32 0 s starting thread reader check
    2012/10/27 21:21:32 0 s reader check thread started
    2012/10/27 21:21:32 0 s starting thread check
    2012/10/27 21:21:32 0 s check thread started
    2012/10/27 21:21:32 0 s adteknik3.5 [mp35] creating thread for device /dev/ttyUSB0
    2012/10/27 21:21:32 0 s loadbalancer: can't read from file /tmp/.oscam/stat
    2012/10/27 21:21:32 0 s anti cascading disabled
    2012/10/27 21:21:32 885BE30 h HTTP Server listening on port 8888
    2012/10/27 21:21:32 885D678 c client connected to 10002 port
    2012/10/27 21:21:32 885D678 c encrypted newcamd:10002-client 127.0.0.1 granted (test1, au=off)
    2012/10/27 21:21:32 885D678 c user test1 authenticated successfully (CCcam)
    2012/10/27 21:21:32 885D678 c AU disabled for user test1
    2012/10/27 21:21:35 8856180 r adteknik3.5 [mp35] ERROR: MP35_Init returns error
    2012/10/27 21:21:36 8856180 r adteknik3.5 [mp35] Cannot open device: /dev/ttyUSB0
    2012/10/27 21:22:39 8856180 r adteknik3.5 [mp35] ERROR: MP35_Init returns error
    2012/10/27 21:22:40 8856180 r adteknik3.5 [mp35] Cannot open device: /dev/ttyUSB0
    2012/10/27 21:23:43 8856180 r adteknik3.5 [mp35] ERROR: MP35_Init returns error
    2012/10/27 21:23:45 8856180 r adteknik3.5 [mp35] Cannot open device: /dev/ttyUSB0


    Cannot get adteknik 3.5 usb card reader to run.



    Reader settings as below:-


    label = adteknik3.5
    protocol = mp35
    device = /dev/ttyUSB0
    Caid = xxxx
    detect = cd
    group = 1
    emmcache = 1,3,2


    Thanks.

    The BEST FORUM for ALL SAT matters. Any reason that you should not be here???:85:

    Hi Experts,


    Any kind assistance is very much appreciate.


    I am using Oscam 7855 to read my NDS card with the Adteknik MP3.5 usb reader but I always get error activating card.
    please find log and settings as below:-


    2012/11/06 20:43:53 0 s max. logsize=10 Kb, loghistorysize=4096 bytes
    2012/11/06 20:43:53 0 s client timeout=5000 ms, fallback timeout=2500 ms, cache delay=0 ms
    2012/11/06 20:43:53 0 s ERROR: Cannot open file "/usr/local/etc/oscam.services" (errno=2 No such file or directory)
    2012/11/06 20:43:53 0 s userdb reloaded: 1 accounts loaded, 0 expired, 0 disabled
    2012/11/06 20:43:53 0 s signal handling initialized (type=sysv)
    2012/11/06 20:43:53 0 s ERROR: Cannot open file "/usr/local/etc/oscam.srvid" (errno=2 No such file or directory)
    2012/11/06 20:43:53 0 s ERROR: Cannot open file "/usr/local/etc/oscam.tiers" (errno=2 No such file or directory)
    2012/11/06 20:43:53 0 s ERROR: Cannot open file "/usr/local/etc/oscam.provid" (errno=2 No such file or directory)
    2012/11/06 20:43:53 0 s ERROR: Cannot open file "/usr/local/etc/oscam.guess" (errno=2 No such file or directory)
    2012/11/06 20:43:53 0 s ERROR: Cannot open file "/usr/local/etc/oscam.ird" (errno=2 No such file or directory)
    2012/11/06 20:43:53 0 s ERROR: Cannot open file "/usr/local/etc/oscam.whitelist" (errno=2 No such file or directory)
    2012/11/06 20:43:53 0 s ERROR: Cannot open file "/usr/local/etc/oscam.cacheex" (errno=2 No such file or directory)
    2012/11/06 20:43:53 0 s Starting listener 0
    2012/11/06 20:43:53 0 s monitor: disabled
    2012/11/06 20:43:53 0 s Starting listener 0
    2012/11/06 20:43:53 0 s camd35: disabled
    2012/11/06 20:43:53 0 s Starting listener 0
    2012/11/06 20:43:53 0 s cs378x: disabled
    2012/11/06 20:43:53 0 s Starting listener 0
    2012/11/06 20:43:53 0 s newcamd: initialized (fd=4, port=10000, crypted)
    2012/11/06 20:43:53 0 s -> CAID: xxxx PROVID: 000000
    2012/11/06 20:43:53 0 s Starting listener 0
    2012/11/06 20:43:53 0 s pandora: disabled
    2012/11/06 20:43:53 0 s Starting listener 0
    2012/11/06 20:43:53 0 s csp: disabled
    2012/11/06 20:43:53 0 s Starting listener 0
    2012/11/06 20:43:53 0 s radegast: disabled
    2012/11/06 20:43:53 0 s starting thread http
    2012/11/06 20:43:53 0 s http thread started
    2012/11/06 20:43:53 0 s starting thread reader check
    2012/11/06 20:43:53 0 s reader check thread started
    2012/11/06 20:43:53 0 s starting thread check
    2012/11/06 20:43:53 8341AC0 h HTTP Server listening on port 8888
    2012/11/06 20:43:53 0 s check thread started
    2012/11/06 20:43:53 0 s mysmartcardreader [mp35] creating thread for device /dev/ttyUSB0
    2012/11/06 20:43:53 0 s loadbalancer: can't read from file /tmp/.oscam/stat
    2012/11/06 20:43:53 0 s waiting for local card init
    2012/11/06 20:43:53 8344FB0 r mysmartcardreader [mp35] mp35_reader_init: started
    2012/11/06 20:43:57 8344FB0 r mysmartcardreader [mp35] mp35_product_info: MP3.5 - FW:04.03
    2012/11/06 20:43:57 8344FB0 r mysmartcardreader [mp35] mp35_reader_init: Using oscillator 1 (3.57MHz)
    2012/11/06 20:43:58 8344FB0 r mysmartcardreader [mp35] Reader initialized (device=/dev/ttyUSB0, detect=cd, mhz=357, cardmhz=357)
    2012/11/06 20:43:58 8344FB0 r mysmartcardreader [mp35] card detected
    2012/11/06 20:44:09 8344FB0 r mysmartcardreader [mp35] Error activating card.
    2012/11/06 20:44:31 0 --- Skipped 2 duplicated log lines ---
    2012/11/06 20:44:31 8344FB0 r mysmartcardreader [mp35] card initializing error
    2012/11/06 20:44:31 0 s init for all local cards done
    2012/11/06 20:44:31 0 s anti cascading disabled


    [reader]
    label = mysmartcardreader
    protocol = mp35
    device = /dev/ttyUSB0
    caid = xxxx
    ident = xxxx:000000
    group = 1



    Thanks.

    The BEST FORUM for ALL SAT matters. Any reason that you should not be here???:85:

Your resource for Linux TV servers and smart card readers.

Find software downloads, drivers, and support for server setup and card-sharing configurations. Set up a Linux-based TV server. Access downloads and support for server software and USB card readers for advanced TV reception and management

Participate now!

Don’t have an account yet? Register yourself now and be a part of our community!

Register Yourself Login