can,t get it to work ,,,, cccam works fine ,,, any ideas,,,, thanks
mgcamd not working on latest BlackPole image
- markez
- Closed
- Thread is marked as Resolved.
-
-
Not enough info given to find the issue buddy, tell us what you have tried already, what your configs look like, where did you FTP the configs, is mgcamd active as default softcam ?
-
downloaded mgcamd 1.38 from linuxsat support addons on blackpole image then rebooted ,then i ftp,d my newcamd list file to user/keys, rebooted and no pictures ,,,,,, any ideas ,, thanks
-
Is mgcamd the default softcam ? Press Blue button >> press left or right and select mgcamd 1.38 >> Press OK..
Has the N line been converted to a CWS = line in newcamd.list ?
-
yes to both those questions ,, works fine in my dreambox ,, should i change chmod,,,,, thanks
-
Edit mg_cfg and try changing the box type to 06 dreambox/mips and try to detect and fast reconnect to lost (and not used atm) server..
Code
Display More# box type # 00 autodetect, change only if you think wrong type detected. # 01 dbox2 # 02 dreambox # 03 triple-dragon # 04 relook # 05 openbox # 06 dreambox/mips # 08 stapi/kathrein # 09 stapi/ipbox # 11 stapi/openbox [COLOR='#FF0000']B: { 06 }[/COLOR]
Code# network retry, use summ for several options # 00 disable # 01 retry every new ecm # 02 try to connect to offline shares every Q: seconds # 04 try to detect and fast reconnect to lost (and not used atm) server # + XX messages number and YY seconds to reconnect # mg will reconnect to server, if no answer to last XX ecm/keepalive or # if no answer for last ecm or keepalive sent for YY seconds # set to 0 to disable N: { 04 } 5 30
-
tried that still not working , heres a list of my files in user/keys keys folder, cccamd.list ,keys.rar, mg-cfg ,newcamd.list,priority.list,replace.list ,softcam key ,,,,,,,,i don,t know if i,m missing anything, thanks
-
can,t seem to get mgcamd 1.38 working in ultimo with blackpole image ,, can anyone point me in the right direction of a working version of mgcamd with blackpole image ,,,,,,,,,, thanks
-
Has the box got access to the net!
on Vix image (not familiar with BP sorry) there is a Network Test wizard...i found a couple of times i have had to switch on or off the DHCP..opposite to what its set at lol!
-
will try that ,, cccam works fine , just can,t get mgcamd to work ,,thanks
-
ahh no if Cccam is working fine then you do have sorry didnt read that part
You say you have Cccam working fine?
Are Cccam and Mgcamd both installed on box? if so have you stopped the Cccam when using Mgcamd?
Only one can run at the sane time and bear in mind if you have set say Cccam to enable on restart you will have to stop this then start mgcamd???
-
Its probably more of a configuration issue than mgcamd not working, attached is the same file that is on TS Panel and has been tested..Check /tmp/mgcamd.log for debug info..
Try this config in mg_cfg;
-
thanks for that ,, downloaded ipk file ,ftpd to temp , manual install on remote , reboot receiver , edit newcamd list file with my cws line which works on my dm ,reboot receiver, still no pictures ,, edited mg-cfg with the data shown still nothing , press blue button swap to cccam and pictures come on, if i use same list file in dm it works straght away using mgcamd 1.38 and 1.35 ,,, is mgcamd deffinetly working with black pole , if it is i may need to do a reflash ,,,, thanks for the help
-
Hi
I am running mgcamd1.38 on two Vu+ Ultimo's (One with oscam server, and one without)
Here is a working mg_cfg for vu+ boxes (# box type B: { 06 })
(Confirmed working on Vu+ Duo and Vu+ Ultimo)Best regards
#########mg_cfg############
###########VU+############
########################### EMM messages
# 00 don't show any EMMs (default)
# 01 show only valid EMMs
# 02 show valid and bad EMMs with complete data display
M: { 01 }# ECM messages
# 00 don't show anything about ecm
# 01 normal mode, show pids processed, decoded ecm and cw
# 02 verbose mode, show valid and bad ECMs with data
C: { 02 }# AU
# 00 disable, no emm pids processed
# 01 enable, emm pids always processed for soft-au and shared cards
# 02 auto, emm started only if channel cant be decoded
# 03 process emm pids for network cards update only
A: { 01 }# key update (sum 01 or 02 with 04)
# 01 update only new keys, default setting
# 02 update all keys (used for valid PMK checking)
# 04 enable TPS au
# + tps SID, which pmt pid contains au pid
U: { 01 } 0x12c0# config files folder (softcam, autoroll, ignore/priority)
# 00 files in /var/keys
# 01 files in /tmp
T: { 00 }# network mode, use summ for several clients
# 00 no network (default)
# 01 newcamd netclient
# 02 radegast netclient
# 04 camd3 netclient
# 08 gbox netclient
# 32 cccamd netclient, card list saved as /tmp/cccamd.info
# (ECM only, supported server version up to 2.1.1, later not work)
G: { 01 }# network retry, use summ for several options
# 00 disable
# 01 retry every new ecm
# 02 try to connect to offline shares every Q: seconds
# 04 try to detect and fast reconnect to lost (and not used atm) server
# + XX messages number and YY seconds to reconnect
# mg will reconnect to server, if no answer to last XX ecm/keepalive or
# if no answer for last ecm or keepalive sent for YY seconds
# set to 0 to disable
N: { 07 } 5 30# network ecm timeout in seconds
K: { 15 }# newcamd dead routes connect retry, sec
Q: { 10 }# network shares priority
# 00 gbox, newcamd, cccamd, radegast, camd3 (default)
# 01 camd3, radegast, cccamd, gbox, newcamd
# 02 cccamd, newcamd, camd3, gbox, radegast
P: { 00 }# on screen display type
# 00 No OSD (default)
# 01 neutrino
# 02 enigma
# 03 relook
# + user password for http auth
O: { 00 } username password# on screen display Options, summ of:
# 01 show emu ecm
# 02 show network shares messages
# 04 show decoding failed / fta
# 08 show emm keys update
# + web port to use for osd
S: { 03 } 80# Log option, summ of:
# 00 off
# 01 network udp log
# 02 log to console
# 04 file, appended ! delete it by yourself, before it eat all your hdd
# + IP udp-port log-file-name
#L: { 02 } 172.16.1.1 28007 /tmp/mgcamd.log
#L: { 04 } 127.0.0.1 28007 /tmp/mgcamd.log
L: { 00 } 127.0.0.1 28007 /tmp/mgcamd.log# keep ecm cache, seconds
# every cache entry takes 28 bytes, so 24h cache will take *only* 240-400kb of memory,
# for openbox/elanvision users with remote shares make sense to set it higher than default value,
# to not hammer cards while timeshifting or playing crypted recordings.
E: { 15 }# cache option, summ of:
# 00 Off (default)
# 01 Ecm pids cache, store pids used to decode in /tmp/ca_cache.list at exit, load at startup, same syntax as restore.list
# 02 Ecm data cache, remember CW for (E:) time
# 04 Emm cache for network cards, do not resend the same emm twice, cache not cleared until restart
H: { 07 }# reread files, summ of:
# 00 No (default)
# 01 reread config file on channel change (including priority and ignore, but not replace/cache)
# 02 reread SoftCam.Key on channel change
# 04 reread SoftCam.Key if file changed
R: { 04 }# debug, summ of
# 00 off (default)
# 01 debug ecm
# 02 debug emm
# 04 debug network ecm
# 08 debug network emm
# 16 debug network login
# 32 show mem/cpu stats every 1 min
# 64 add timestamp to log messages
D: { 00 }# box type
# 00 autodetect, change only if you think wrong type detected.
# 01 dbox2
# 02 dreambox
# 03 triple-dragon
# 04 relook
# 05 openbox
# 06 dreambox/mips
# 08 stapi/kathrein
# 09 stapi/ipbox
# 11 stapi/openbox
#B: { 00 }
B: { 06 }# map all 180x nagra caids to 1801
# default is 01
F: { 00 } -
give this a try m8
Usr/Keys change newcamd.list attributes to 755 & add lan to end of des keyeg = friends.dns port username password 01 02 03 04 05 06 07 08 09 10 11 12 13 14 lan
-
thanks , tried both those ,tried superglud and inspiral , still no joy , are any of you using black pole image ,,,, thanks
-
hi markez
have you tried starting it in telnet ,,
I have ad 2 images on my vu ultimo,, one was blackpole and one was blackhole,,
on one don't know which image it was on but I remember in telnet imgcamd 1.38 showed that libcrysto. ??? and another lib was missing,, once I downloaded the libs mgcamd was ok ,,jimmy
-
where can i find the libs ,,,,thanks
-
There`s always the option of trying a different image to resolve your issue..
-
thats what i,m going to do probebly , but am hanging on trying to get mgcamd to work , because i know i,ll change the image get mgcamd to work and then have problems with channel lists and getting the epg to work properly,, as it is now everything works great ,epg ,media player,channel list up to date ,cccam is flawless,,, been messing with llinux receivers for ages and i know when i flash it some things that are great on this image will be not so good on another image ,,,, unless anyone can point me in the right direction for an image for the ultimo that has channel list for all of europe ,cccam works and so does mgcamd, the epg is good, and media player plays everything i throw at it ....... thanks markez
VU+ ULTIMO PVR Ready Linux Enigma2 Receiver Full HD 1080p
Download VUPlus Images and Enigma2 Team Support from Black Hole, OpenATV, OpenBH, Open Black Hole, OpenDroid, OpenESi, OpenHDF, OpenLD, OpenPLi, OpenSPA, OpenViX, Open Vision, PKT Hyperion, PurE2, SatDreamGR, VTi.
Participate now!
Don’t have an account yet? Register yourself now and be a part of our community!