There are 21 replies in this Thread which was already clicked 1,840 times. The last Post () by guinessguy.
My UK cards seem to have stopped decoding.
Using Debian 6 server with Oscam and an Omnikey reader.
Getting following messages:
rejected user ident (120 ms) (0/0/0/0) (no card support 0963:000000)
status is show Off/No entitlements found.
Any ideas please?
have you checked your entitlements in oscam? there should be a date, make sure they havent expired.
Cards still work - test in paired genuine providers box. I have two cards and watching one now.
No entitlements are shown via Oscam:
Cardsystem Valid To IRD ID (nagra) Provider
n/a n/a
Serial Rom ATR
0000000000000000
Type Caid Provid ID Class Start Date Expire Date Name
post config for reader
Not sure if coincidence or not but I originally changed the httpuser and httppwd when set up the server but this didn't kick in so had been admin/admin UNTIL restarted Oscam this time and it changed to the new ones. I had restarted many times since I originally changed and we're talking months so a bit strange in my eyes.
# oscam.conf generated automatically by Streamboard OSCAM 1.20-unstable_svn build #7209
# Read more:
[global]
logfile = /dev/null
cachedelay = 120
nice = -1
preferlocalcards = 1
[newcamd]
port = 10001@0963:000000
key = 0102030405060708091011121314
[webif]
httpport = 8888
httpuser = ******
httppwd = ******
httprefresh = 5
httpallowed = 192.168.0.0-255.255.255.255
[lcd]
This one?
# oscam.server generated automatically by Streamboard OSCAM 1.20-unstable_svn build #6059
# Read more:
[reader]
label = omnikey1
protocol = pcsc
device = 0
caid = 0963
detect = cd
mhz = 357
cardmhz = 357
group = 1
blockemm-u = 0
blockemm-s = 0
blockemm-g = 1
blockemm-unknown = 1
emmcache = 1,3,2
ecmwhitelist = 0963@000000:3E,42,44,45,47,4E,F4,53,54,61,62,68,69 ,6A,6B,B6,6D,6F,71,72,73,77,78,79,7A,7C,7D,7E,80,8 B
Not got teamviewer on this pc
Was working fine....
Yes - assume this is what you mean:
user = ***
pwd = ***
monlevel = 0
uniq = 0
group = 1
au = omnikey1
As mentioned before, I think a password change has kicked in. Would user id or 8888 name and pwds impact on anything else?
that is not the reader its under server under files
do u have teamviewer
looks ok, you user is linked to group 1 right? ports open ect? what did u change to kill it?
mine is
[reader]
label = ***sub
protocol = pcsc
device = 0
ecmwhitelist = 0963:3E,41,42,44,45,47,4E,4F,5F,53,54,61,62,67,68,69,6A,6B,6C,6D,6F,70,71,72,73,74,76,77,78,79,7A,7C,7D,7E,80,85,8B,82,3B,66
detect = cd
mhz = 357
cardmhz = 357
group = 1
emmcache = 1,3,2
blockemm-unknown = 1
blockemm-g = 1
saveemm-unknown = 1
saveemm-u = 1
saveemm-s = 1
saveemm-g = 1
remove the 000000 in white list
I didn't change anything - a peer told me not working....
I'll check. What do you mean by user is linked to group 1 ?
no, but you have 000000 in the whitelist, u dont need it, as if you can get to webif thats ok
you could pm me ip ect to try the webif but upto u from here
Thanks. Will test later today. Was having a 'mare yesterday as laptop charger died so battery ran flat.
Just seems bizarre as worked fine and then stopped.
ok well have a look
I have like that under my reader past many months and my card update so far very good so adding or removing 000000 will no make any diffrence at all.
I have fixed the problem. I am embarrassed to admit what it was; when swapping the cards round the wife had put in wrong way round. Sorry to waste your time but thanks for your help.
One thing, however, I have noticed is it's decoding all subscribed channels except espn and s sport ones so will check channels set under oscam. Need to check correct ones for uk.
i have you got her in a bag in the shed
Yes, you need an upto date whitelist so you can get the missing channels.
"i have you got her in a bag in the shed"
No - under the new patio!!!!
I have updated the whitelist you had on oscam section.
I have my white list in my oscam.server section:
label = XXXX
protocol = XXXX
device = 0
caid = 0963
detect = cd
mhz = 357
cardmhz = 357
group = 1
blockemm-u = 0
blockemm-s = 0
blockemm-g = 1
blockemm-unknown = 1
emmcache = 1,3,2
ecmwhitelist = 0963:3E,42,44,45,47,4E,4F,5F,53,54,6C,61,62,66,67,68,69,6A,6B,6D,6F,70,71,72,73,76,77,78,79,7A,7C,7D,7E,80,85,8B,82
I assume that is the correct place? Only I noticed in Oscam there is also a section 'oscam.whitelist'
Don’t have an account yet? Register yourself now and be a part of our community!
