help wanted ive just got my Amiko SHD-8900 Alien today and iam not getting any channels at all on my tv i have a channel list installed on it but iam having on joy at all hope someone can help me out many thanks
Amiko SHD-8900 Alien help me
- bigsteakie
- Thread is marked as Resolved.
-
-
No FTA channels or Just the Paid ones?
-
iam getting no channels at all there is a channel list for astra 28.east but when i click on any theres no picture at all
-
What are you using? Spark or Enigma2 ?
greetings
-
ive tryed both but still on luck it maybe my setting but i dont know where to start
-
Do a scan, then you'll have channels.
Not sure about Spark but in Enigma 2 press menu, settings, tuner configuration, autoscan.
It will take about half an hour.
-
ive done a autoscan it picks up the channels but i still get no picture on my tv it must be my setting but i dont know how to change them
-
how can i setup USALS on my settings
-
USALS won't have anything to do with it. If your box is scanning and finding the channels then that isn't the issue.
When you say you have no picture does any warning or anything come up on the screen when you press OK on the remote?
-
the box is scanning and not finding any channels
-
Make sure your tuner is firmly connected and you have a uk xlm file some firmware does not include uk sat details
-
the tuner is firmly connected and i get uk sat details but no picture on tv
-
i have a channel list but no picture
-
That will be dish alignment if its scanning and your not getting any channels.
You need to set your receiver up for USALS if on a motorised dish, if on a fixed dish it will need alignment to the required satellite.
If you need to set up USALS, you need to go into Menu -> service Searching-> Tuner Configuration.
You then need to input your co-ordinates as you would have on your 5kybox F3.
(see attached picture)
You need to put the co-ordinates in where the red spots are. The screen shot is from my Giagblue Receiver but it should be near enough the same on your Alien.
Nano
-
thanks ill give it a go and let you know if i have any luck
-
http://linuxsat-support.com/am…irmware-28-12-2012-a.html
hi you have to put tis image with new driver for the turner work fine
-
nano do i need to be in Spark or Enigma2 thanks
-
That method is for Enigma. I never used Spark, i thought it was a horrendous operating system.
-
hello nano ive got every sat working apart from astra 28.east any idea what iam doing wrong thanks
-
Reveivers as AMIKO 8900 Alien, AMIKO2, Golden Media Triplex, Etc. belong to the kind of FULAN
receivers, so in some ways are different for other ones but they use the same DCC as the
DREAMBOX and CCcam or OSCAM as well. They are difficult to program so we must have patience
and experience and you must have the DREAMBOX DCC. Amiko1 has proc. 7111. AMIKO2 have 7162SPARK
1º- If you have the image above xx51 you must update the image in the menu to xx51 (It is in SPARK menu)
because it has the new BOOTLOADER for SPARK and ENIGMA2. It take time. After you must update to xx61 and not
or other ( EUROPE )
2º-This image works with Cccam but the image does not have it, so you must get the plugin named "plugin"
and then put it in a pen FORMATED in FAT32. Go to plugin menu and load it
Then you have Cccamxx14. Key and it must be GREEN.
3º- Now you have Cccam and Cccam.cfg. Go to /VAR/KEYS/ and edit Cccam.cfg as the same
with DREAMBOX with DCC. Normaly users only use ENIGMA2ENIGMA2
1º- Get in this forum a HDMU image ( 7162 ) is the best and have almost everything.
After, I remember to get the REVOLUTION SKINS ( Black ) ( White ) etc. because
these skins are exclusive of the HDMU image.
2º- Get a pen formated in FAT32 and make a folder " enigma2 "
3º- After decompress the image, you will get 2 files and send them to " enigma2" pen
4º- Receiver OFF
Pen with the image in the back usb
Key ON + O.K. at same time
When you see Force, leave the key OK
Key CH- till you see Enig.
key volume +
It will flash. It take time
When you see Succ and then BOOT, take off the pen
5º- In enigma2 it works with OSCAM. It is in menu. There are 2 OSCAM, 6666 and other
I use OSCAM 6666 and to activate you must go to menu the HDMU center and key GREEN
Before you have to go to the plugin menu and get it there. There you will find plenty of
plugins to download.
6º - The OSCAM works like the Cccam and you will find to edit in /VAR/KEYS/OSCAM.server
just follow instructions
ENABLE = 1
FILE = xxxxxxxxx,port
USER= xxxxxxxxxx
PASS= xxxxxxxxxxThere are much more to say but you must be-cool and you will get more experience.....
Spark STI 7111 Support
Support for ADOH R1, Amiko Alien SHD 8900, Amiko Alien Mini, Goldmaster HD 1200, Golden Media 990 CR HD PVR Spark LX, Golden Media Spark Reloaded, Edision Argus Pingulux, Edision Argus Pingulux Plus, Galaxy Innovations GI S, SAB Unix F+ Solo, Dynavision Spark, Dynavision Spark Plus, Fulan Spark I+, Truman Premier 1+, Samsat Linux 1, Startrack SRT 2020 HD, FullHD FH 2020 HD, Yumatu Spark, Visionnet Hammer, Visionnet Fireball, Superbox S750, Sogno Spark Revolution, Spark STI 7111 Receivers.
Participate now!
Don’t have an account yet? Register yourself now and be a part of our community!