Hi guys, I know i have to set up both my tuners and i have but i still cant seem to watch a second channel while i have another recording. I think i have done something silly or just overlooked something but i have tried all the settings for tuner b. What should the right setting be?
How to watch a second channel when recording
- budley
- Thread is marked as Resolved.
-
-
What have you got tuner b setup as at the minute bud?
Can you post the settings please?
-
Configuration mode Simple
Mode DiSEqC A/B
Port A Astra 1N/2A/2F/Eutelsat 28A (28.2E)
Port B Astra 1N/2A/2F/Eutelsat 28A (28.2E)
Set voltage and 22KHz Yes
Send DiSEqC only on satellite change No -
Quote
Hi guys, I know i have to set up both my tuners and i have but i still cant seem to watch a second channel while i have another recording. I think i have done something silly or just overlooked something but i have tried all the settings for tuner b. What should the right setting be?
To watch & record the setup I used was:
Tuner A Equal to Tuner B
Tuner B Simple / Single / 28.2 -
To watch & record the setup I used was:
Tuner A Equal to Tuner B
Tuner B Simple / Single / 28.2Tried that but all i get is black screen when i change channel
-
Have you tried swapping the coax from the dish around on the tuners to rule out a faulty cable, connection, or lnb ?
-
First we need to know exactly what setup you have Dish, motor and LNB wise so that we can correctly recomend what settings you need to use.
for example.
Dish Fixed on 28.2 east, LNB octo.
or
Dish 80cm motorized, LNB quad.at the moment were all just guessing as to your setup and that helps no one at all.
-
First we need to know exactly what setup you have Dish, motor and LNB wise so that we can correctly recomend what settings you need to use.
for example.
Dish Fixed on 28.2 east, LNB octo.
or
Dish 80cm motorized, LNB quad.at the moment were all just guessing as to your setup and that helps no one at all.
I have a fixed dish, its my old sly dish and setup, with a vu+ solo2 box
-
have you tried creating a 2nd line for the receiver?
I know when i set up my solo2 i had a similar problem.......tried all different settings and no joy!
I created a 2nd line and it all came back for some reason? this wasn't needed on my duo!
Just a thought! Someone will shoot it down but it worked here and never investigated whether it was box or server settings that messed it up?
try it...and report back at worse one of the list to check
-
have you tried creating a 2nd line for the receiver?
I know when i set up my solo2 i had a similar problem.......tried all different settings and no joy!
I created a 2nd line and it all came back for some reason? this wasn't needed on my duo!
Just a thought! Someone will shoot it down but it worked here and never investigated whether it was box or server settings that messed it up?
try it...and report back at worse one of the list to check
How do i create a second line? SORRY
-
How you sharing bud
Create a 2nd account on your server then dupliate the line you have with new details!
What Cam you using? Cccam.cfg is in /etc and newcamd.list (for Mgcamd) is in usr/keys one of them will have your line in it
-
Using cccam its usually my mate who does that side of things for me but i could try and give it a go, tho my knowledge is very limited with it
-
I have a fixed dish, its my old sly dish and setup, with a vu+ solo2 box
In that case set both tuners to
Simple
Single
28.2 east
no. -
In that case set both tuners to
Simple
Single
28.2 east
no.Its working, thanks but how is it working????? I am sure i had those settings in several times before.
Oh well thanks guys for your help.
-
Its working, thanks but how is it working????? I am sure i had those settings in several times before.
Oh well thanks guys for your help.
Because you were setting your receiver up for use with a motor and Diseqc switch when you dont have them.
The settings i posted are the correct ones for use with a fixed dish, with a dual, quad or octo lnb.
-
Because you were setting your receiver up for use with a motor and Diseqc switch when you dont have them.
The settings i posted are the correct ones for use with a fixed dish, with a dual, quad or octo lnb.
I see, well thanks once again.
-
I see, well thanks once again.
no worries, sometimes it's easiest to just go back to basics and ask the simple questions when diagnosing faults.
-
Yes but if your on CCcam then dont you need a dual login ?
-
master G
Moved the thread from forum Vu+ SOLO2 Support to forum VU+ SOLO 2.
VU+ SOLO 2 PVR Ready Linux Enigma2 Receiver Full HD 1080p
Download VUPlus Images and Enigma2 Team Support from Black Hole, OpenATV, OpenBH, Open Black Hole, OpenDroid, OpenESi, OpenHDF, OpenLD, OpenPLi, OpenSPA, OpenViX, Open Vision, PKT Hyperion, PurE2, SatDreamGR, VTi.
Participate now!
Don’t have an account yet? Register yourself now and be a part of our community!