Hi all..I have a HUGE question that I hope someone can help with...WHY is it not possible to see HD channels from local Viasat 093E card? I have for quite some time now used Oscam to share my local card...and it clears all channels except the HD channels!! Can anyone help or advice me to the people that knows what to do or why?? Thank you in advance!
Why no HD channels on local Viasat 093E card??
-
- Nagra Cards OSCam
- dbstaff
- Thread is marked as Resolved.
-
-
The cards are hardware paired to the original Viasat box. You cannot view the HD channels, its been that way for some time.
Its the same as what $ky are currently in the middle of doing to knock out the cards so they can only be read in an original $ky Digibox.
Nano
-
Hi all..I have a HUGE question that I hope someone can help with...WHY is it not possible to see HD channels from local Viasat 093E card? I have for quite some time now used Oscam to share my local card...and it clears all channels except the HD channels!! Can anyone help or advice me to the people that knows what to do or why?? Thank you in advance!
Not too sure how they do it probably Jtag the original Viasat receiver with card in situ so to speak
-
I have never seen these channels open. Like i said the card is hardware paired to the original receiver, if they knew how to get the info i'm sure you would have seen then open before now.
Nano
-
trust me nano
i have viasat HD in my share and have had it for over 12 months.
but i can no longer watch it because the HD channels have moved sat and a 2m plus dish is required in my part of England to get a signal.
Ian.
-
I stand corrected. I haven't seen those channels open for ages
-
I like @Nano...have not ever seen these channels open in my sharing time :hell_boy: But i sincerely hope that if somebody knows how to do or witch "right people" to speak to that, they will tell it...cause there's still a kind of rumor out there saying that by knowing the right people you can get these channels cleared! I just wonder if this rumor are true or not...for now i believe not! Cheers
-
Its definitely doable as you can see on the screenshot in the previous post, It surprised me when it opened. As Ian1095 has pointed out these channels are now on the Scandinavian Nordic beam so thats going to put them out of reach of most people anyway.
I see very few HD channels on 5e now even with a bit of fine tuning of the dish. It looks like you are going to need quite a big dish to get them in England. How they are getting the boxkey for these channels is anybodies guess, but it certainly makes it look more promising for $ky UK
Nano
-
As i said in my previous post i believe they Jtag the original Viasat receiver, as ian1095 i have had these for well over a year and as stated you need to know the right people simple as
-
Okay, i understand your screenshot then Nano...makes more sense now :) But i am from Denmark myself (scandinavian) so i have my dish (a good English Raven dish) pointed to sat-pos. (4.8E) some will say (5.0E) and i have boxkey for the Viasat receiver but maybe not the "right" one as you say yourself. But okay...i will look for the "right" people now where i have got myself a brand new TV (Samsung 46") ..then it would be more appropriate with HD channels :)
-
Hi
Beside from the boxkey you need another key that will have to be "jtagged" out of the original box.
As far as I have understand, you also need an original box that hasn't been "to much" updated since it isn't possible to do the jtag with the newest firmware.
And at last you need a cardserver that support both boxkeys. I don´t remember which one at the moment.Funburner
-
This has been discussed for many years. More petrol on the fire...:
The following was posted in a russian forum:
QuoteThis is the Pace Pace_TDS865NSDX dump(also Samsung.DSB-H670N)
I think it will be useful for someone.
link:
nolink
-------------------------------------------------------------------
About paired keys.
We knows, that newcs supports nd$ paired cards with undocumented options:
<ekpair>********************************</ekpair>
<hwkey>********************************<//hwkey>
(you can simply find *** values in attached dump to compare with yours dump )
(Latest Gbox.net also supports that paired cards.)
So how to get that keys?
It possible to get keys from memory dump.
_____________________________________________
How to get into box.........
open the box
and look for j514on pcb
there you have 4 pin connection via
this is 232 ttl
connect 232 ttl to this j514 it is 4 pins via there..(add....using any ttl to rs232 converter)
and have putty or serial conection sw
baudrate is 115200 8N1
you will see console booting up from box..
you have linux console now
---------------------------------------------------------------------------
how to extract the hwkeys and ekpariedkey...
you need the card and valid subscribtion for hd channels for this box
switch off the power box..
but before that switching off the box... tune in the HD chanell first
and turn on the power without SC
you get information insert smartcard in the reader.... OSD on tv
!!!!!!! don't do that.! (don't insert card yet)
you have connect 232 and have console now...
take break interrupt
the magic key to interrupt is CTTRL+4
and you are inside ..linux console
shell is busybox
go to /NDS/bin/
start /.mor_epg_zapviasat &
you will get now the same OSD message now.. "insert sc in the reader"
do that..
you got hd picture now
switch off the box on the front of box..
not power cable..
take dump from /dev/mem
with dd cmd dd if=/dev/mem of=/mnt/usb/somefile.bin
but you have to mount usb first
because too big file
about 268 mbyte
take this dump out and connect to your regular linux machine..
you have to search for some tags
but it is important to do the clean startup
because om RAM
after key extraction don't need to go inside box
dont do that.. if you want safe .. have all your files on the usbflash
--------------------------------------
final step
just look in memory for 30 00 00 01 tag or 30 00 01
and after what 16 byte is the first key
and the second one is 10 00 00 tag from memory
You got paired keysQuoted from "mrk":
[QUOTE]Algoritm to oscam is here. You shall put it in the videguard reader, the you're ready to go..
void VG_ReorderAndDecrypt(unsigned char *p,unsigned char *key)
{
unsigned char tmp[16];
AES_KEY akey;
xcCamCryptVG_Reorder16A(tmp, key);
AES_set_decrypt_key(tmp, 128, &akey);
xcCamCryptVG_Reorder16A(tmp, p);
AES_decrypt(tmp, tmp, &akey);
xcCamCryptVG_Reorder16A(p, tmp);
}
void VG_Overcrypt(char *a1, char *a2, char *a3)
{
char tmp[16];
memcpy(tmp,a2,16);
VG_ReorderAndDecrypt(tmp,a1);
VG_ReorderAndDecrypt(a3,tmp);
}
where:
a1-ekpair
a2- hwkey
a3- cw
/QUOTE]Quoted from "mrk" again:
[QUOTE][
That will work for h670n v.119 too but not for the latest firmware (122), since console has been disabled 4.4.2011. Problem is that most of the stb's was updated without users permission which should be illegal if you ask my opinion.
This hack was published with NewCS in 01.06.2009 and it has been working since then, so theres nothing new.
/QUOTE]I think above posts is only valid for 090F card, not the 093E (new one, blue arrow), but maybe...?
Experts step in...I have an old Samsung h670n with firmware v.119 if you........ -
I think above posts is only valid for 090F card, not the 093E (new one, blue arrow), but maybe...?
Experts step in...I have an old Samsung h670n with firmware v.119 if you........Do You have the Samsung H670N with old firmware? Is it possible to buy it from You or to borrow?
-
i think i have one of old boxes will try to find it first :) But not sure i can do as explain here :)
-
Its definitely doable as you can see on the screenshot in the previous post, It surprised me when it opened. As Ian1095 has pointed out these channels are now on the Scandinavian Nordic beam so thats going to put them out of reach of most people anyway.
I see very few HD channels on 5e now even with a bit of fine tuning of the dish. It looks like you are going to need quite a big dish to get them in England. How they are getting the boxkey for these channels is anybodies guess, but it certainly makes it look more promising for $ky UK
Nano
Hi nano I'm in the midlands what size dish have you got to get these. Cheers
-
I have a 1.1m Gilbertini dish. As previously said i cannot get much off the Nordic beam from 5e unless its a really clear day and even then i get a lot of breakup.
Nano
-
Got my hands on a dump, but cant fint the keys (There are so many 30 00 00 10-tags.. Anyone could provde help?
-
Got my hands on a dump, but cant fint the keys (There are so many 30 00 00 10-tags.. Anyone could provde help?
Or give me a link to the reference file.. :)
-
master G
Set the Label from Viasat OSCam to Nagra Cards OSCam
OSCam Support Forum
Configs, discussion, downloads and guides for OSCam Softcam.
Participate now!
Don’t have an account yet? Register yourself now and be a part of our community!