Tutorial : Lock cardreader to specific usb port

ok nobody know about above post, just few more question, in ubuntu that rules should be in etc/udev/rules.d? and what if rules in that folder is 70 xxx.rules do i need change my rule file number to 71?and what would be with other rules in that folder? thanks.

Hi all is there any such solution or fix for omnikeys i done thatfellows 64bit version ubuntu
and on reboot the omikeys go all over the place, originally i taught is was
the oscam was the fault
thanks in advance

This is my situation

bus 001, device 004 : 0403:6001 Smartreader (Device=001:004 EndPoint=0x82 insert in oscam.server 'Device = Serial: cempeda')
bus 002, device 003 : 0403:6001 Smartreader (Device=002:003 EndPoint=0x82 insert in oscam.server 'Device = Serial: ')
bus 002, device 006 : 0403:6001 Smartreader (Device=002:006 EndPoint=0x82 insert in oscam.server 'Device = Serial: ')
bus 002, device 008 : 0403:6001 Smartreader (Device=002:008 EndPoint=0x82 insert in oscam.server 'Device = Serial:saya ')
bus 002, device 009 : 0403:6001 Smartreader (Device=002:009 EndPoint=0x82 insert in oscam.server 'Device = Serial: ')

and the triple smargo?

the file can be used or you must change the idproduct and idvendor ? etc ...

works this also whit this Version off ??
ClearOS Community release 6.5.0 (Final)
Kernel Version 2.6.32-431.17.1.v6.i686