Failed to pull in 28 east the way i had it!..
Just after moving the centre of the dish to approx 22 degrees! Will let ye know how it goes!
Failed to pull in 28 east the way i had it!..
Just after moving the centre of the dish to approx 22 degrees! Will let ye know how it goes!
BOOM!!...
The change of tactics worked!!...
28,19 and 13 east bombing in unreal strong!!
Put the other lnb back on my motor dish!
Will order another lnb over the weekend and clean up my design to make it bearable for eyes! lol...
Great buzz though!
Thanks to all the supporters and I proved ye wrong to all my doubters!
Nice work mate!
Just proves that with a bit of hard work anything can be pulled off!
well done m8
Where is the moter ;-) well done mate !
wrap up those Fs, etc, well before the corrosion sets in ;)
Fair play to ya lad ,,so now you´ve got the rest of the summer ¿why not try out a reverse dish for wifi ??
Ok, Ok, just a thought .....
Congrats ....
caz
Well done mate.
What size dish are you using?
Did you get the skew/arc by tilting the lnb holder arm or adjusting the height of the bolts.
caz ,
what you mean a reverse dish for wifi ?
new2
Well done mate.
What size dish are you using?
Did you get the skew/arc by tilting the lnb holder arm or adjusting the height of the bolts.
An 80cm dish m8 I got from LIDL lol...
I just got reception and fine tuned it by adjusting the bolts and angle to gain optimum signal and quality...
-The 3 exhaust clamps cost be €2 each...
-Nuts, blots and washers €1.50...
-The switch cost me €8..
And a few spare hours to tinker with it!...
Worth it in the end!!...
are you gonna try adding anymore sats ??
new2
Not at the moment..
They are the three main sats used in the house so unless there's a major change in footie rights i won't be.....
Ordered another one of these tonight...
Hopefully it'll finally be finished this week..
Just sorting out the channel list on my spider!
Thinking of adding a cheapo extender like a *** eye...
Picked up a roll of co-ax for free off a friend so why not! ;)
Messed around with it today!
Now picking up the full three sats on full boom!!
Just only 2 ports on my switch work so have to wait until i get another before it works to its full capability!
Can't beat a bit of duck tape and tyre wraps!
Spot the difference! lol...
Making a tidier version of the lnb arm!
Finally got this one up tonight...
Only got two lnbs up at the min as switch is f**ked..
So will throw up 13 east whenever i get a switch again...
The exhaust clamp idea as a lnb holder is bloody brilliant mate !
Are going to do it like that myself
Hi!
May have these photos to help you easily make multifeed LNB ?
Clamp ( 1 1/ 4'' ) the exact size is important .
P.S.
My assistant - Tom(British shorthair cat)
bf527cbe220150bc145.jpgc68e1e51d7fb5f88a9b.jpg9fc328343e0458.jpgd0a464287cf6f5a29e.jpg080ccf02eb.jpg4eae8d426995aa9ab3.jpgba38abd.jpg
Don’t have an account yet? Register yourself now and be a part of our community!