Hi lads, just got a qbox mini hd but dont really know were to start its working fta and has a terrestrial tuner no probs..tuning ok..but that as far got .(wish it was a easy as a dm/vu) my ambition is to get a cline into it any help would be a big help eg..ftp,radar.cfg thats it don know anymore thanks in advance 12
Help! qbox mini
- annie12
- Thread is marked as Resolved.
-
-
Open radar.cfg which is located in var/etc and put your C line(s) under the following section in radar.cfg :
#---------- CCCAM OR GBOX CLIENT LINES --------------#
you can get your C lines from your cccam.cfg file, use notepad or any text editor to do that.
hope that it helped you.Best to use a FTP program that has a text editor built in
-
Can't communicate with rec. what program might a guy need to do the ftp thanks phonix..
-
You could try any of these ftp clients, filezilla, winscp and tunnelier.
-
Can't get to communicate even with the internet?
-
Can't get to communicate even with the internet?
I had the same problem. Go to Network Settings and ensure that interface and DHCP are set to yes and then activate the network. -
reflashed it. Roy Image BKP QBOXHDMINI 5.5.2011 using radar/oscam/ anyone kow how to get cline in thanks in advnce guys
-
Using Filezilla or the like, got to var/etc and in there is the radar.cfg file that you edit. delete everything in there and add the C line.
If using Oscam, FTP to var/oscam/conf and edit the oscam.server file. Delete everything and then add the following
[reader]
reconnecttimeout = 5
label = remote
protocol = cccam
device = IP,PORT - Add your own details here
account = USER,PASSWORD - Add your own details here
group = 1
blockemm-u = 1
blockemm-s = 1
blockemm-g = 1
blockemm-unknown = 1
caid =
cccversion = 2.2.1 - Add whichever CCCam you are using.This works for me.
-
got cine to work with radar dont have a clue how to get ccam installed but would like to. Thanks for your help emkwrx ps.you might be able to give me some advice all help welcome as this rec. is new to me..i am really a dm/vu type of a person..TIA
-
There is no cccam plugin yet radar or oscam are the only way for clients
-
dump radar, OScam is far better to use and more stable.
You should have the ability to download OScam via the addon server, then do as emkwrx says in the conf file and you'll be good to go
-
have oscam but not to sure how to configure it ?? as i only want to use it as a client THANKS 4 d help so far guys
-
Just cut and paste what I stated earlier into the file, it is a client only setup. Ths part is no different to what you would do with cccam for instance as long as you are familiar with FTP. Good luck.
-
got a bit confused about this cccversion = 2.2.1 then the penny dropped,worked perfect thanks m8
-
master G
Moved the thread from forum Duolabs QBox to forum Duolabs Qbox HD.
Participate now!
Don’t have an account yet? Register yourself now and be a part of our community!