Picons are on the internal flash not HDD and im still getting the problem.
Pause when turning over channel
- Dave20
- Thread is marked as Resolved.
-
-
Picons are on the internal flash not HDD and im still getting the problem.
Did you restart enigma2 after deleting from the HDD?
-
yes i did.
-
This is also with free to air channels ?as I didnt see if you had a card or a share ?
-
Then if i were you i'd be looking at other potential causes such as disabling timeshift, just to see of it makes a difference.
-
yes its on all channels..ok ill disable timeshift and try that next.
Thanks for your patience anyway lads. -
Well this is interesting as i have an identical setup to Dave20/// i have a 4 year old trojan bombproof vu duo with a 500gig hdd/// i have also always directed my picons towards the hdd because i use permanent timeshift anyway so my hdd is always working and i have no issues whatsoever//1 second channel changes on subscription channels too !
Dave20 it sounds like you have had a bad flash or you have installed something you should not have/i do not use tools like tspanel so something like this may have caused this or maybe even a dodgy hdd(what model of hdd do you have)?...anyway i actually have a backup of a vix image i know worked well for me which i can send via pm if this is the image you prefer...i am using OpenPli atm but i can load the vix back up and check everything is all well and send.
MK
-
Hi mate
i got the vu box from WOS about 2 weeks ago..i fitted my hard drive myself, very pleased with myself i was aswell.
The HDD is a seagate.
To be honest as i say ive only just started learning how to use the box 2 weeks ago, so still quite confused on some things.
Thank you for the offer and that would be great to try, but that sounds a little over my head, i cant say i prefer vix image as its all i know because it came installed when i bought the box.
I will have a go at trying anything to try and solve this interuption on channel change i have if i know there is help from you boys there.
what is open Pli ? -
Then if i were you i'd be looking at other potential causes such as disabling timeshift, just to see of it makes a difference.
Hi Pheonix..tryed disabling timeshift, made no difference at all mate.
-
The HDD is a seagate.Thank you for the offer and that would be great to try, but that sounds a little over my head, i cant say i prefer vix image as its all i know because it came installed when i bought the box.
My hdd is also a seagate:)
Learn how to backup your image/settings and configs...its easy.
I will upload an image and send it to you via pm...best i send vix tbh as thats what you are used to....all you do is put the vuplus extracted (yellow) folder on a fat32 usb stick and put the stick in the front usb port and power on the box///after that you only need to mount your hdd...simples
Let me know.
MK
-
Yes Ok I'll give it a go.. Thanks mate
-
will i lose all my settings by doing this? or shall i just start from scratch with your instructions?
for all i know the problem might have been caused by myself messing about with settings..what do you think? -
will i lose all my settings by doing this? or shall i just start from scratch with your instructions?
for all i know the problem might have been caused by myself messing about with settings..what do you think?Which settings are you worried about losing? the image i was going to send you is zeus(vix) so if you have an older image the settings might not be compatible...really the settings you should backup is your cccam.cfg/newcamd.list...whatever you use and thats it...its all set up otherwise for 28.2
-
im not really bothered about losing them because as i say perhaps i have installed something i shouldn't have..i have cccam installed...so how do i back just that up?
-
im not really bothered about losing them because as i say perhaps i have installed something i shouldn't have..i have cccam installed...so how do i back just that up?
var/etc
backup cccam.cfg
You must know how to do this otherwise you would not have got it working !
I will upload my image and send you the details via pm including login etc..
-
ok great. thankyou
-
Check your pm box
Participate now!
Don’t have an account yet? Register yourself now and be a part of our community!