Hi Guys
I am running oscam on a debian server at the moment. Also have it running on windows 7. My question is will the card auto update when its in a linux box or PC using smargo? or does it need to be in the sat box. I saw this tut by ten below http://linuxsat-support.com/os…pdating-entitlements.html and my settings are like that but have noticed that this seems to refer to oscam running on the dreambox not on an external server. My entitlements run out tonight midnight so should I have to put the sly card in the original box or should it update on my debian server. Cheers guys
sly card update
-
- Videoguard2 Cards OSCam
- steve67474
- Thread is marked as Resolved.
There are 11 replies in this Thread which was already clicked 2,807 times. The last Post () by steve67474.
-
-
my card updates ok in pc server using Ubuntu with smargo
-
my card updates ok in pc server using Ubuntu with smargo
Cheers m8,
Will leave it over night and see what happens. -
you need to set an fline (do your own) like this to get updates to your card
F: user pass 2 1 0 { 0:0:2 }
-
Where do I put that? it looks like it goes into ccam.cfg. Are you saying I have to put that in all three of my dms? I am not running oscam on the dreamboxes I am running it on a debian server so my card is on a smargo in a linux box. BTW it didn't update. More expires on 17th so I may have to stick it in sly box. Oh my config file looks like this....
[global]
nice = -1
WaitForCards = 1
logfile = stdout
preferlocalcards = 1
saveinithistory = 1[webif]
httpport = xxxx
httpuser = admin
httppwd = admin
httpallowed = 127.0.0.1,192.168.0.0-192.168.255.255
# protocols[newcamd]
key = 0102030405060708091011121314
port = 15xxx@0963:000000;10001@0963:000000and my server looks like this...
[reader]
label = sly_uk
protocol = mouse
device = /dev/ttyUSB0
caid = 0963
boxid = xxxxxxxx
detect = cd
mhz = 357
cardmhz = 357
group = 1
emmcache = 1,3,2
blockemm-unknown = 1
blockemm-g = 1
lb_weight = 101All channels seem to be working? but is is what is in my oscam reader info
->[videoguard2-reader] type: VideoGuard B***B (0963), caid: 0963
[videoguard2-reader] serial: xxxxxxxx, BoxID: xxxxxxxx, baseyear: 1997
[videoguard2-reader] tier: 0003, expiry date: 2011/09/17-00:00:00
[videoguard2-reader] tier: 000b, expiry date: 2011/09/17-00:00:00
[videoguard2-reader] tier: 001d, expiry date: 2011/09/17-00:00:00
[videoguard2-reader] tier: 30e1, expiry date: 2011/09/15-00:00:00
[videoguard2-reader] tier: 30e2, expiry date: 2011/09/15-00:00:00
[videoguard2-reader] tier: 30e3, expiry date: 2011/09/15-00:00:00
[videoguard2-reader] tier: 30e4, expiry date: 2011/09/15-00:00:00
[videoguard2-reader] tier: 30e5, expiry date: 2011/09/15-00:00:00
[videoguard2-reader] tier: b732, expiry date: 2011/09/17-00:00:00
[videoguard2-reader] tier: b736, expiry date: 2011/09/17-00:00:00
[videoguard2-reader] tier: b765, expiry date: 2011/09/17-00:00:00
[videoguard2-reader] tier: b766, expiry date: 2011/09/17-00:00:00
[videoguard2-reader] tier: b772, expiry date: 2011/09/17-00:00:00
[videoguard2-reader] tier: b773, expiry date: 2011/09/17-00:00:00
[videoguard2-reader] tier: b846, expiry date: 2011/10/16-00:00:00
[videoguard2-reader] tier: b860, expiry date: 2011/10/16-00:00:00
[videoguard2-reader] tier: b8cc, expiry date: 2011/10/16-00:00:00
[videoguard2-reader] tier: b8ce, expiry date: 2011/10/16-00:00:00
[videoguard2-reader] tier: b8d1, expiry date: 2011/10/16-00:00:00
[videoguard2-reader] tier: b8d2, expiry date: 2011/10/16-00:00:00New Structure:
entitlement tier: caid 0963 provid 000000 id 0000000000000003 class 00000000 valid until 17.09.2011
entitlement tier: caid 0963 provid 000000 id 000000000000000B class 00000000 valid until 17.09.2011
entitlement tier: caid 0963 provid 000000 id 000000000000001D class 00000000 valid until 17.09.2011
entitlement tier: caid 0963 provid 000000 id 00000000000030E1 class 00000000 valid until 15.09.2011
entitlement tier: caid 0963 provid 000000 id 00000000000030E2 class 00000000 valid until 15.09.2011
entitlement tier: caid 0963 provid 000000 id 00000000000030E3 class 00000000 valid until 15.09.2011
entitlement tier: caid 0963 provid 000000 id 00000000000030E4 class 00000000 valid until 15.09.2011
entitlement tier: caid 0963 provid 000000 id 00000000000030E5 class 00000000 valid until 15.09.2011
entitlement tier: caid 0963 provid 000000 id 000000000000B732 class 00000000 valid until 17.09.2011
entitlement tier: caid 0963 provid 000000 id 000000000000B736 class 00000000 valid until 17.09.2011
entitlement tier: caid 0963 provid 000000 id 000000000000B765 class 00000000 valid until 17.09.2011
entitlement tier: caid 0963 provid 000000 id 000000000000B766 class 00000000 valid until 17.09.2011
entitlement tier: caid 0963 provid 000000 id 000000000000B772 class 00000000 valid until 17.09.2011
entitlement tier: caid 0963 provid 000000 id 000000000000B773 class 00000000 valid until 17.09.2011
entitlement tier: caid 0963 provid 000000 id 000000000000B846 class 00000000 valid until 16.10.2011
entitlement tier: caid 0963 provid 000000 id 000000000000B860 class 00000000 valid until 16.10.2011
entitlement tier: caid 0963 provid 000000 id 000000000000B8CC class 00000000 valid until 16.10.2011
entitlement tier: caid 0963 provid 000000 id 000000000000B8CE class 00000000 valid until 16.10.2011
entitlement tier: caid 0963 provid 000000 id 000000000000B8D1 class 00000000 valid until 16.10.2011
entitlement tier: caid 0963 provid 000000 id 000000000000B8D2 class 00000000 valid until 16.10.2011On main screen of oscam for reader it says "Card OK 15 entitlements" I am sure it was more than that before 15th
-
Easiest way is set a user account for ur main box as standard,
Add the line into user account
Au=sly_uk
All other accounts add
Au=0
Then just add n-line into your main box (as your config setup is newcamd)
The entitlements will update no probs! - works for me!
If u have 2 cards use 2 separate accounts in 2 boxes , or a person u trust with an n line for the second!
-
Thanks deerhunter just looked at my oscam user file and had AU = *** UK in all three accounts. now have done main account with AU=SLY_UK and all others 0. I will syop and start oscam later to enable changes should my 15th expiry date update ok now or do I need to stick it in sly box?
New account config ...
[account]
user = xxxxxxxxxx
#description = for local mgcamd or DVBAPI
pwd = xxxxxxxx
disabled = 0
uniq = 1
group = 1
au=Sly_UK
caid = 0963:000000 -
cheers deerhunter I had AU = *** UK in all three accounts now look like this...
[account]
user = xxxxxxxxx
#description = for local mgcamd or DVBAPI
pwd = xxxxxxxxx
disabled = 0
uniq = 1
group = 1
au=Sly_UK
caid = 0963:000000[account]
user = xxxxxxxxx2
#description = for local mgcamd or DVBAPI
pwd = xxxxxxx
disabled = 0
uniq = 1
group = 1
au=0
caid = 0963:000000[account]
user = xxxxxxxxx3
#description = for local mgcamd or DVBAPI
pwd = xxxxxx
disabled = 0
uniq = 1
group = 1
au=0
caid = 0963:000000 -
oops did a reply but it didn't register so redid it now I have three Sorry guys LOL. I found o tip on forcing update to hold backup button down on sly box whilst booting then wait for 4 lights to come on. Did that and it said *** woz updating software please wait6 for 10 mins. all that completed but card entitlements didn't update. Tip says they should have. Is this true? eventually phoned sly and said box woz off when update happened so they zapped the card for me
-
hello,
a try to help
in oscam.server on you server running your s** card, you have :
Quote[reader]
label = sly_uk
protocol = mouse
device = /dev/ttyUSB0
caid = 0963
ident = 0963:000000 # not sure but i think its missing in your config
boxid = xxxxxxxx
detect = cd
group = 1
emmcache = 1,3,2
blockemm-unknown = 1
blockemm-g = 1
lb_weight = 101and in oscam.user :
Quote[account]
user = main_dreambox_account
#description = for local mgcamd or DVBAPI
pwd = xxxxxxxxx
disabled = 0
uniq = 1
group = 1
au= sly_uk # has to be exactly the same as the label reader
caid = 0963
ident = 0963:000000 # not sure but i think its missing in your configthen you switch on some channel on s** uk on your main dreambox and see what happens... (maybe you have to watch a specific channel to get the update ?)
you should see if there is an update in oscam webif (in READERS part, EMM written UK / G / S / UQ)
-
steve you accounts look fine , once they are in make sure your boxes are running cccam 2.1.3 (no others work properly) add an n-line to your cccam.cfg file and updates will deffo come through:
Nline would be :
N: ip-address port-no user password 01 02 03 04 05 06 07 08 09 10 11 12 13 14 256
Your box will then report hop 0 and your box will be tricked into being a local card
Also the au=sly_uk must match the label=sly_uk in the config file so it knows that that user can update!
Note : add cccam on a different port in config of your debian to share your card to other peers NOT N. Lines! (also needs adding in router port forward)
Eg :
[cccam]
port=10002 # can be anything you choose , edit as required)
version=2.1.4
cccreshare=1This will allow any user you give a c-line to to connect to your debian with 1 reshare
or you can omit cccreshare line and add cccreshare line into each user account to control different users reshare options
FINALLY : i dont have the ident line in my server but my caid is caid = 0963:000000 in reader section
Hope that helps , dont forget card only updates entitlements around same time each month so dont panic too much!
-
Thanks deerhunter, I am running ccam 2.2.1 on all my boxes do I have to downgrade to 2.1.3 for updates to work. Am only locally sharing at mo as Vermin media have fooked the network around my area and its taking 3 months to resolve. packet losses like fook. Just using Nlines on my three 800s and all working good.
-
master G
Set the Label from UK OSCam to Videoguard2 Cards OSCam
OSCam Support Forum
Configs, discussion, downloads and guides for OSCam Softcam.
Participate now!
Don’t have an account yet? Register yourself now and be a part of our community!